2017 JEEP GRAND CHEROKEE ECO mode

UNDERSTANDING YOUR INSTRUMENT PANEL
CONTENTS
UCONNECT SETTINGS ............................6
SRT Performance Pages ......................6
SRT Drive Modes ...........................14
Race Options .............................26
Valet Mode ...............................29
ECO Mode ...............................31
5

UCONNECT SETTINGS
SRT Performance Pages
Performance Pages is an application that provides a display for perfor-
mance indicators, as received from the instrument cluster, that will
help you gain familiarity with the capabilities of your SRT vehicle in
real-time.
To access the SRT Performance Pages, press the “Apps” button on the
touchscreen, then press the “Performance Pages” button on the
touchscreen, or press “SRT Performance Pages” in the top left of the
touchscreen while in Drive Modes. Press the desired button on the
touchscreen to access that specific Performance Page.
WARNING!
Measurement of vehicle statistics with the SRT Performance Pages
is intended for off-highway or off-road use only and should not be
done on any public roadways. It is recommended that these features
be used in a controlled environment and within the limits of the law.
The capabilities of the vehicle as measured by the Performance
Pages must never be exploited in a reckless or dangerous manner,
which can jeopardize the user’s safety or the safety of others. Only a
safe, attentive, and skillful driver can prevent accidents.The Performance Pages include the following:
• Home
• Timers
• Gauges 1
• Gauges 2
• G-Force
• Engine
UNDERSTANDING YOUR INSTRUMENT PANEL
6

SRT Drive ModesYour SRT vehicle is equipped with a Drive Modes feature which allows
for coordinating the operation of various vehicle systems depending
upon the type of driving behavior desired. The Drive Modes feature is
controlled through the Selec-Track switch and may be accessed by
performing any of the following:
• Pushing the SRT button on the Selec-Track switch.
• Selecting “Drive Modes” from the “Apps” menu.
• Selecting “Drive Modes” from within the Performance Pages menu.
The SRT Drive Modes main screen displays the current drive mode and
real-time status of the vehicle’s performance configuration. The select-
able Drive Modes are Track, Sport, Auto, Snow, Tow or Custom.
Information shown will indicate the actual status of each system, along
with a vehicle graphic that displays the active drive mode status. The
color red indicates “Track,” orange “Sport,” yellow “Street” and blue
for “Snow.” These features will reset to AUTO upon an ignition cycle. If
the system status shown does not match the current drive mode set up,
a message will be displayed indicating which values are not matching
the current mode.
NOTE:Electronic Stability Control (ESC) Full-Off is only available in
Selec-Track TRACK mode and can be activated by pushing and holding
the ESC Off button on the instrument panel switch bank for five
seconds.
Drive Modes — Track
UNDERSTANDING YOUR INSTRUMENT PANEL
14

Snow Mode
Selecting “Snow” with the Selec-Track switch will activate snow mode
for use on loose traction surfaces. When in Snow mode (depending on
certain operating conditions), the transmission will use second gear
(rather than first gear) during launches, to minimize wheel slippage.
The Transmission is set to “Snow” setting highlighted in blue. StabilityControl is set to “Full” highlighted in blue. All-Wheel Drive is set to
“50/50” highlighted in blue. Steering is set to “Street” highlighted in
yellow. Suspension is set to “Street” highlighted in yellow.
Paddle shifters can be enabled or disabled by pressing the “Snow
Set-up” button on the touchscreen.
Drive Mode Snow
Snow Mode Set-Up
UNDERSTANDING YOUR INSTRUMENT PANEL
17

Race Options
Press the “Race Options” button on the touchscreen while in the Drive
Modes screen, to display the vehicle’s Launch Control screen. Within
Race Options, you can activate, deactivate, and adjust the RPM values
for the Launch Control and Shift Light features.
Refer to “Shift Light” in this section for further information on shift
light features.Launch Control
WARNING!
Launch Mode is intended for off-highway or off-road use only and
should not be used on any public roadways. It is recommended that
this feature be used in a controlled environment, and within the
limits of the law. The capabilities of the vehicle as measured by the
performance pages must never be exploited in a reckless or danger-
ous manner, which can jeopardize the user’s safety or the safety of
others. Only a safe, attentive, and skillful driver can prevent acci-
dents.
Race Options
UNDERSTANDING YOUR INSTRUMENT PANEL
26

The Valet Mode Deactivation key pad will then prompt you for your four
digit PIN code, enter your PIN code and press the “OK” button on the
touchscreen. Your vehicle will return to the default state.
NOTE:If your four digit PIN is lost or forgotten, the vehicle will exit Valet
Mode after a battery disconnect for approximately five minutes. Recon-
nect the battery and cycle the ignition to the RUN position, the vehicle
will be in Auto Mode.
ECO Mode
Push the ECO button on the center stack of the instrument panel to
enter ECO mode. ECO mode modifies the vehicle’s engine and trans-
mission settings to provide improved fuel economy at a trade-off with
acceleration performance. Increased engine exhaust noise and/or vi-
Valet Mode Deactivation PIN
Eco Mode
UNDERSTANDING YOUR INSTRUMENT PANEL
31

bration may be noticed while ECO is active. This is normal and a result
of the increased amount of operating conditions where the vehicle is
allowed to operate in four cylinder shutoff mode.
• Changing the Drive Mode will deactivate ECO.
• ECO will be disabled when another Drive Mode is selected or ECObutton is pushed.
• If ECO is activated in AUTO mode, it will remain in ECO upon activation of AUTO mode from any other mode including across key
cycles. To deactivate press the ECO button again.
UNDERSTANDING YOUR INSTRUMENT PANEL
32

LAUNCH CONTROL — IF EQUIPPED
This vehicle is equipped with a Launch Control system that is designed
to allow the driver to achieve maximum vehicle acceleration in a
straight line. Launch Control is a form of traction control that manages
tire slip while launching the vehicle. This feature is intended for use
during race events on a closed course where consistent quarter mile
and zero to sixty times are desired. The system is not intended to
compensate for lack of driver experience or familiarity with the race
track. Use of this feature in low traction (cold, wet, gravel, etc.)
conditions may results in excess wheel slip outside this systems control
resulting in an aborted launch.
Preconditions:
• Launch Control should not be used on public roads. Always checktrack conditions and the surrounding area.
• Launch Control is not available within the first 500 miles (805 km) of engine break-in.
• Launch Control should only be used when the engine and transmis- sion are at operating temperature.
•
Launch Control is intended to be used on dry, paved road surfaces only.
CAUTION!
Use on slippery or loose surfaces may cause damage to vehicle
components and is not recommended. Launch Control is only available when the following procedure is
followed:
NOTE:
Pushing the SRT button on the Select-Track switch or pressing
the “Apps” button on the touchscreen are the two options to access
launch control features. Please refer to “SRT Drive Modes” in “Multi-
media” for further information.
1. Press the “Race Options” button on the touchscreen or push the LAUNCH button on the Select-Track switch.
2. Press the “Launch RPM Set-Up” button on the touchscreen. This screen will allow you to adjust your launch RPM’s for optimum
launch/traction.
3. Press the “Activate Launch Control” button on the touchscreen, follow instructions in the instrument cluster display.
• Make sure the vehicle is not moving.
• Put vehicle in first gear.
• Steering wheel must be pointing straight.
• Vehicle must be on level ground.
• Apply Brake Pressure.
• While holding the brake, rapidly apply the accelerator pedal to wide open throttle. The engine speed will hold at the RPM that
was set in the “Launch RPM Set-up” screen.
STARTING AND OPERATING
34