2017 INFINITI QX30 sensor

4
Instrument Panel
1 Multi-function Control touch-screen / RearView Monitor display / Aroun d View® Monitor
display (if so equipped)
2 Audio system
3 Control panel switches


•
Seat heating (if so equipped)


•
Hazard light switch



•
Idle Stop/Start (ISS) OFF switch



•
Electronic Parking Sensor OFF switch
4 Climate control panel
•


Heater and air conditioning (automatic)

•


Front/Rear window defroster
5 Electronic shift lever
6 P (Park) button
7 Drive mode switch
8 Infiniti multi-function controller
9 Parking brake
10 External light switches
For more information, refer to your Owner

7
Opening the Liftgate
Hood Latch
To open the liftgate, press the
button on the Intelligent Key and then
press the liftgate release
1.
The liftgate also automatically unlocks
if you are carrying the Intelligent Key
and press the liftgate release
1.
To open the hood, pull the hood release handle
1 located below the
instrument panel 2 . Slightly lift the hood upward and pull the lever to
the left to unlock the hood. Then insert the support rod into the slot.
To close the hood, drop it from a height of 8-12 inches (200-305 mm). \
If the hood sensor detects the hood is not completely latched shut, the \
wipers will not function.
1
1
1
Sun Visors
1 Pull down the sun visor to block glare from the front.
2 Remove the sun visor from the center mount by lifting it slightly and sw\
ing it
to the side to block glare from the side window.
3 Slide the sun visor out from the mount to further extend the visor locat\
ion.
To apply the parking brake, press the electric
parking brake button
1 located below the
instrument panel, regardless of the ignition
switch position.
To release the parking brake pull the parking
brake handle
1 toward you while the ignition
is on. The parking brake will be automatically
released when you depress the accelerator pedal
as long as certain conditions are met, such as having your seatbelt fast\
ened.
Parking Brake
1
2
3
1
2
For more information, refer to your Owner

10
Turn the switch 1 to one of the following positions to operate the
windshield wipers:
Continuous wipe, fast.
Continuous wipe, slow.
Automatic wipe, high rain sensor sensitivity.
Automatic wipe, low rain sensor sensitivity.
Wipers are OFF.
Press
2 to operate the windshield washer and wipers.
REAR WIPER AND WASHER
Turn the rear wiper switch
3 to one of the following positions to
operate the rear wipers (shown in the order they appear on the
wiper switch):
Wipes with washer fluid, then returns to
intermittent wiping.
Intermittent wiping.
Wipers are OFF.
Wipes with washer fluid, then returns to off.
Wiper and Washer Switch

2
1
3
1 Left-hand parking lights switched on.
2 Right-hand parking lights switched on.
3 Side lights, license plate lights and combination meter lighting switche\
d on.
4 Automatic headlight mode (headlights switch on/off automatically
depending on ambient light conditions/daytime light system) switched on\
.
5 Dipped beam/high beam headlights. Selection between dipped beam and
high beam is done using the combination switch (see hereafter).
6 Rear fog light switch
7 Front fog light switch
For normal headlight operation, leave the exterior light switch in the
AUTO position.
Exterior Light Operation
7
6
5 4 3
1
2
For more information, refer to your Owner

11
All power windows can be operated through the
main switch on the driver’s door.
1 Power windows open/close.
2 Disable rear passenger window operation by
rear passengers.
POWER WINDOW CONVENIENCE OPENING/CLOSING FEATURE
The vehicle can be locked/unlocked and the power windows can be closed/
opened simultaneously from outside the vehicle using the Intelligent Key\

as follows:
To lock the vehicle and close the power
windows simultaneously, touch the sensor
surface
3 on the door handle until the
windows are fully closed.
To unlock the vehicle and open the
windows simultaneously, press and hold
the
button on the Intelligent Key until the
windows have reached the desired position.
Windows
1
2
3
To adjust the time and the appearance of the clock on the display:
Press the

MENU button
1 on the Infiniti controller. Then, touch
the “Settings” key on the display.
Locate and touch the “Clock” key to adjust “On-Screen Clock”\
,
“Daylight Savings Time”, “Clock Format (24h)”, and “Tim\
e Zone”.
The time can be adjusted through “Offset Adjustment”
2 by
adjusting the minutes and/or hours forward or backward. The
current clock time can be set up to a difference of 12 hours and
59 minutes.
1
Clock Set/Adjustment
2
For more information, refer to your Owner