7
Opening the Liftgate
Hood Latch
To open the liftgate, press the
button on the Intelligent Key and then
press the liftgate release
1.
The liftgate also automatically unlocks
if you are carrying the Intelligent Key
and press the liftgate release
1.
To open the hood, pull the hood release handle
1 located below the
instrument panel 2 . Slightly lift the hood upward and pull the lever to
the left to unlock the hood. Then insert the support rod into the slot.
To close the hood, drop it from a height of 8-12 inches (200-305 mm). \
If the hood sensor detects the hood is not completely latched shut, the \
wipers will not function.
1
1
1
Sun Visors
1 Pull down the sun visor to block glare from the front.
2 Remove the sun visor from the center mount by lifting it slightly and sw\
ing it
to the side to block glare from the side window.
3 Slide the sun visor out from the mount to further extend the visor locat\
ion.
To apply the parking brake, press the electric
parking brake button
1 located below the
instrument panel, regardless of the ignition
switch position.
To release the parking brake pull the parking
brake handle
1 toward you while the ignition
is on. The parking brake will be automatically
released when you depress the accelerator pedal
as long as certain conditions are met, such as having your seatbelt fast\
ened.
Parking Brake
1
2
3
1
2
For more information, refer to your Owner
8
MANUAL SEAT ADJUSTMENTS (IF SO EQUIPPED)
Forward and backward adjustment:
Pull the lever
1, located under the seat, up and hold it while sliding
the seat forward or backward and release it to lock the seat in the
preferred position. When returning the seatback to the upright position \
always be certain it is completely secured in the latched position.
Seat angle adjustment (if so equipped):
Turn the hand-wheel
2 forward or backward to adjust the angles so
that your thighs are lightly supported.
Seat lifter (if so equipped):
Repeatedly pull up or push down the adjusting lever
3 to adjust the
seat height to the desired position.
Seatback angle:
Relieve the pressure on the seatback and turn the hand-wheel
4
forward or backward to adjust the seatback angle.
Seat Adjustments
2
5
LUMBAR SUPPORT
Push each side of the adjusting switch
5 to adjust the seat lumbar area until
the desired position is achieved.
POWER SEAT ADJUSTMENTS (IF SO EQUIPPED)
Forward and backward adjustment:
Move the adjusting switch
6, located on the door, forward or backward to the
desired position.
Reclining:
Move the adjusting switch
7 forward or backward to the desired position.
Seat lifter (if so equipped):
1.
Pull up or push down the adjusting switch 6 to adjust the seat height
until the desired position is achieved.
2.
Tilt up or down the adjusting switch 6 to adjust the front angle of the
seat until the desired position is achieved.
5 6
7
1
3
4
For more information, refer to your Owner
