2017 HONDA ACCORD HYBRID Owners Manual

416
Driving
When Driving
Turning on the Power
1.Make sure the parking brake is applied.
2. Check that the shift lever is in
(P, then
depress the brake pedal.
u Although it is possibl e to start the vehicle
in
(N, it is safer to start it in (P.
1 When Driving
When you set the power mode to ON, you may feel
as if the brake pedal is sinking down. This is normal.
1Turning on the Power
Keep your foot firmly on the brake pedal when
starting the power system.
The engine is harder to st art in cold weather and in
thinner air found at altitudes above 8,000 feet (2,400
meters).
When turning on the power system in cold weather,
turn off all electrical accessories such as the lights,
climate control system, and rear defogger in order to
reduce the 12-volt battery drain.
If you live in a region where winter is extremely cold,
an engine block heater will improve starting and
warming of the engine. Cons ult a dealer for details.
If the exhaust system sounds abnormal or you can
smell exhaust gas inside the vehicle, have your vehicle
checked by a dealer. There may be a problem with
the engine or exhaust system.
Brake Pedal
17 ACCORD FHEV-31T3W6200.book 416 ページ ２０１６年４月１１日　月曜日　午後２時４０分

Continued417
uuWhen Driving uTurning on the Power
Driving
3. Press the POWER button without
depressing the accelerator pedal.
4. Check the READY indicator.
u Keep depressing the brake pedal until
the READY indicator comes on.
u The READY indicator comes on when
the power system is on and you can start
driving.
u If the outside temperature is extremely
low, you cannot drive until conditions are
improved. In this case, the READY
indicator does not come on, as well as a
warning message appears on the multi-
information display.
2 Multi-Information Display Warning
and Information Messages P. 88
1Turning on the Power
The immobilizer system pr otects your vehicle from
theft.
If an improperly coded de vice is used, the power
system does not activate. 2 Immobilizer System P. 134
Bring the smart entry remote close to the POWER
button if the battery in the smart entry remote is
weak.
2 If the Smart Entry Remote Battery is Weak
P. 546
The power system may not activate if the smart entry
remote is subjected to strong radio waves.
If the smart entry remote battery is low, touch the
POWER button with the remote.
2 If the Smart Entry Remote Battery is Weak
P. 546
The engine may not run when the vehicle is ready for
driving.
You can start driving with the READY indicator on.
If you press the POWER button while depressing the
brake pedal with the READY indicator on, the power
mode is set to VEHICLE OFF (LOCK) and you cannot
start driving. 2 READY Indicator P. 75
17 ACCORD FHEV-31T3W6200.book 417 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuWhen Driving uTurning on the Power
418
Driving
You can remotely turn the power syst em on using the smart entry remote.
■To turn the power system on
The power system is on for up to 10 minutes without you starting the vehicle.
To extend the time for another 10 minute s during the first 10 minutes, press the
button, then press and hold the button.
u The turn signal lights come back on three times, twice, if a 10-minute
extension request was tra nsmitted successfully.
■Remote Engine Start1Remote Engine Start
If there are buildings an d obstacles between your
vehicle and the remote, th e range will be reduced.
While the vehicle is moving, the range may be
reduced.
This distance may vary by external electrical
interference.
The power system may not be turned on by the remote
engine start if:
•You have disabled a remo te engine start setting
using the multi-information display, audio/
information screen
*, or audio/information touch
screen*.•The power mode is not in VEHICLE OFF (LOCK).•The shift lever is in a position other than ( P.•The hood is open, or any door or the trunk is
unlocked.
•You have already used the remote twice to turn the
power system on.
•Another registered smart entry remote is in the
vehicle.
3WARNING
Engine exhaust contains toxic carbon
monoxide.
Breathing carbon monoxide can kill you or
cause unconsciousness.
Never use the remote engine starter when
the vehicle is parked in a garage or other
area with limited ventilation.
Press the button, then pr ess and hold the button.
* Not available on all models
17 ACCORD FHEV-31T3W6200.book 418 ページ ２０１６年４月１１日　月曜日　午後２時４０分

Continued419
uuWhen Driving uTurning on the Power
Driving
■To turn the power system off1Remote Engine Start
•There is any antenna failure.•Door is unlocked with the built-in key.
•The engine oil pressure is low.
•The engine coolant temper ature is extremely high.•The security system alarm is not set.
The power system may be turned off while it is on if:
•You do not start the vehicl e within 10 minutes of
turning the power system on with the button
on the smart entry remote.
•The power system is turned off by using the smart
entry remote.
•Door is unlocked with the built-in key.•The hood is open.
•The shift lever is in a position other than ( P.
•The engine coolant temper ature is extremely high.•The engine oil pressure is low.
•The Malfunction Indicator Lamp (MIL) comes on if
there is a problem with the emissions control
systems.
While the power system is on, the vehicle will
automatically preconditi on inside the vehicle.
When it is warm outside:
•The climate control system is activated in
recirculation mode.
When it is cold outside:
•The defroster is activated at a moderately warm
temperature.
•The rear defogger and door mirror heaters are
activated.
Press and hold the button
for one second.
17 ACCORD FHEV-31T3W6200.book 419 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuWhen Driving uTurning on the Power
420
Driving
You can turn the power system off when the vehicle is completely stopped.
1. Shift to
(P.
2. Press the POWER button.
1. While depressing the brake pedal, press the POWER button.
2. Keeping your right foot on the brake pedal, check that the READY indicator is on,
then release the parking brake. Check th at the parking brake indicator has gone
off.
2 Parking Brake P. 463
3.Put the shift lever in (D. Select (R when reversing.
4. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
■Hill start assist system
Hill start assist keeps the brake engaged br iefly to help prevent the vehicle from
rolling on inclines as you move your fo ot from the brake pedal to the accelerator.
Move the shift lever to
(D or when facing uphill, or (R when facing downhill,
then release the brake pedal.
■Stopping the Power System
■Starting to Drive1 Starting to Drive
The power system is off when the shift lever is moved
out of
(P before the POWER button is pressed.
Follow the step 1 wh en starting to drive.
When the power system is turned on using the button
on the smart entry remoteWhen the power system is turned on using the button on the smart entry remote
When the power system is turned on in any case
B
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippe ry slope, and
does not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
As a hybrid vehicle, the sounds and vibrations from
the engine may be absent even though the vehicle is
ready for driving. It also makes you fail to recognize
that you can start.
Make sure to check if the READY indicator is on
before you start to drive.
17 ACCORD FHEV-31T3W6200.book 420 ページ ２０１６年４月１１日　月曜日　午後２時４０分

421
uuWhen Driving uPrecautions While Driving
Driving
Precautions While Driving
Avoid driving in deep water and on flooded roads. This can damage the power
system or driveline, or caus e electrical component failure.
If there is a strong impact with something under the vehicle, stop in a safe location.
Check the underside of the vehicle for damage or any fluid leaks.
Transmission
As with a conventional gasoline-powered ve hicle with an automatic transmission,
this vehicle will creep.
Keep the brake pedal firmly depressed when stopped.
Quickly depressing the accelerator pedal wh ile driving uphill may cause the vehicle
to react similar to an automatic transmissio n vehicle, unexpectedly increasing vehicle
speed. Depress the accelerator pedal carefu lly, especially on slippery roads and
curves.
■In Rain
■Other Precautions
■Creeping
■Kickdown
1 Precautions While Driving
NOTICE
Do not operate the shift lever while pressing the
accelerator pedal. You could damage the
transmission.
If the power mode is set to ACCESSORY while
driving, the power system will shut down and all
steering and brake power a ssist functions will stop,
making it difficult to control the vehicle.
Do not put the shift lever in
( N, as you will lose
regenerative braking (and ac celeration) performance.
During the first 600 miles (1,000 km) of operation,
avoid sudden acceleration or full throttle operation so
as to not damage the powertrain.
Avoid hard braking for the first 200 miles (300 km).
You should also follow this when the brake pads are
replaced.
NOTICE
If you repeatedly turn the steering wheel at an
extremely low speed, or hold the steering wheel on
the full left or right position for a while, the electric
power steering (EPS) system heats up. The system
goes into a protective mode, and limits its
performance. The steering wheel becomes harder
and harder to operate. Once the system cools down,
the EPS system is restored.
Repeated operation under these conditions can
eventually damage the system.
17 ACCORD FHEV-31T3W6200.book 421 ページ ２０１６年４月１１日　月曜日　午後２時４０分

422
uuWhen Driving uShifting
Driving
Shifting
Change the shift position in accordance with your driving needs.
■Shift lever positions
1Shifting
While the High Voltage battery level is full, or the
High Voltage battery temperature is low,
regenerative braking ma y become less effective.
You cannot change the pow er mode from ON to
VEHICLE OFF (LOCK) unless the shift lever is in
( P.
When shifting positions in extremely low
temperatures (-22°F/-30°C), there may be a short
delay before the shift posit ion is displayed. Always
confirm you are in the corr ect shift position before
driving.
Park
Used when parking or turning the
power on or off.
Reverse
Used when reversing.
Neutral
Propulsion power is not transmitted to
wheels.
Drive
Used for normal driving.
Release Button
Drive (B)
Used when driving down a long hill and
to increase regenerative braking.
17 ACCORD FHEV-31T3W6200.book 422 ページ ２０１６年４月１１日　月曜日　午後２時４０分

423
uuWhen Driving uShifting
Driving
■Shift Lever Operation1Shift Lever Operation
When you change the shift lever from
(D to ( R and
vice versa, come to a complete stop and keep the
brake pedal depressed.
Use the shift lever position indicator to check the
lever position befo re pulling away.
If the transmission indicator blinks when driving, in
any shift position, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
Shift Lever Position Indicator
Shift without pressing the shift lever
release button.
Press the shift lever release button
and shift. Depress the brake pedal and press the
shift lever release button to shift.
17 ACCORD FHEV-31T3W6200.book 423 ページ ２０１６年４月１１日　月曜日　午後２時４０分