2017 FORD F250 SUPER DUTY check transmission fluid

[x] Cancel search: check transmission fluid

Page 7 of 642

FORD F250 SUPER DUTY 2017  Owners Manual Bed Ramps....................................................265
Towing
Towing a Trailer............................................268
Trailer Reversing Aids.................................269
Trail

Page 125 of 642

FORD F250 SUPER DUTY 2017  Owners Manual MyView
Trip 1
Fuel Economy
Tire Pressure
Off Road Status
Trip 1Trip/Fuel ScreensAdd/RemoveScreensConfigure MyView
Trip 2
Fuel Economy
Fuel History
Average Speed
Navigation/Compass
Turbo BoostTruck Inf

Page 259 of 642

FORD F250 SUPER DUTY 2017  Owners Manual System Limitations
Cross Traffic Alert has its limitations;situations such as severe weatherconditions or debris build-up on the sensorarea may limit vehicle detection.
The following are other situati

Page 326 of 642

FORD F250 SUPER DUTY 2017  Owners Manual 3. Raise the hood until the lift cylindershold it open.
4. To close, lower the hood and makesure that it is closed properly and fullylatched.
UNDER HOOD OVERVIEW - 6.2L
Air filter.  See Changing the E

Page 327 of 642

FORD F250 SUPER DUTY 2017  Owners Manual Windshield washer fluid reservoir.  See Washer Fluid Check (page 344).E.
Engine coolant reservoir.  See Engine Coolant Check (page 332).F.
Power steering fluid reservoir.  See Power Steering Fluid Che

Page 329 of 642

FORD F250 SUPER DUTY 2017  Owners Manual UNDER HOOD OVERVIEW - 6.8L
Air filter.  See Changing the Engine Air Filter (page 356).A.
Engine compartment fuse box.  See Fuse Specification Chart (page 312).B.
Automatic transmission fluid dipstick.

Page 343 of 642

FORD F250 SUPER DUTY 2017  Owners Manual Coolant Change
At specific mileage intervals, as listed inthe scheduled maintenance information,the coolant should be changed. Theinformation display may display a messageto change coolant at this tim

Page 344 of 642

FORD F250 SUPER DUTY 2017  Owners Manual 6.Install the dipstick making sure it is fullyseated in the filler tube.
7. Remove the dipstick and inspect thefluid level. The fluid should be in thedesignated area for normal operatingtemperature or
Page:   1-8 9-16 next >