2017 Citroen GRAND C4 PICASSO seat adjustment

C4-Picasso-II_en_Chap00a_sommaire_ed02-2016
Touch screen 11
Instrument panels
1
8
Indicator and warning lamps

2
2
Gauges and indicators

3
8
Adjustment buttons

4
6
Trip computer

4
9
Setting the date and time

5
2
InstrumentsOver view
Electronic key - remote control 5
3
Keyless Entry and Starting
5
5
Central locking

6
1
Doors

6
2
Boot
6

4
Motorised tailgate

6
5
Hands-free tailgate access

6
9
Alarm
7

1
Electric windows

7
4
Access
Front seats 76
Rear seats
8
4
Seat modularity

9
1
Steering wheel adjustment

9
3
Ventilation
9

4
Heating
9

6
Dual-zone manual air conditioning
9

7
Dual-zone automatic air conditioning

9
9
Front demist - defrost

1
04
Rear screen demist - defrost

1
04
Scented air freshener

1
05
Interior fittings

1
07
Rear multimedia

1
15
Courtesy lamps

1
23
Interior mood lighting

1
24
Ease of use and comfort
Driving recommendations 125
Starting-switching off the engine with the
electronic key

1
27
Starting-switching off the engine with
Keyless Entry and Starting

1
29
Electric parking brake

1
33
Hill start assist

1
40
5 -speed manual gearbox

1
41
6 -speed manual gearbox

1
41
Automatic gearbox

1
42
Gear shift indicator

1
47
Stop & Start

1
48
Memorising speeds

1
51
Speed limit recognition

1
52
Speed limiter

1
56
Cruise control

1
59
Dynamic cruise control

1
62
Dynamic cruise control with Stop function

1
69
Collision Risk Alert and Active Safety
B r a ke
17

8
Assisted Lane Departure Warning
System
18

3
Blind Spot Monitoring System

1
87
Fatigue detection system

1
90
Parking sensors

1
92
Reversing camera

1
94
360 Vision

1
95
Park Assist

1
97
Under-inflation detection
20

5
Driving
Eco-driving
Contents

76
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Front seats
Manual adjustments
F Raise the control bar and slide the seat for wards or backwards.
When the seat is in the desired position, push
it for wards and backwards without raising the
control bar to check that it has latched. F
T urn the knob to adjust the seat backrest.
As a safety measure, seat adjustments should only be done when stationary.
F P ull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the desired position.
Seat consisting of a seat cushion, a seat backrest and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat.
There is a risk of trapping or pinching passengers if present in the rear seats or jamming the seat if large objects are placed on the floor behind
the seat.
Forwards-backwards Driver's seat backrest angleDriver's seat height
Ease of use and comfort

78
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Front seats
Electric adjustments
F Push the control for wards or rear wards to slide the seat. F
T ilt the control for wards or rear wards to
adjust the angle of the seat backrest. F
O perate the rear part of the control
upwards or downwards to obtain the
desired height.
F

O
perate the front part of the control
upwards or downwards to obtain the
desired angle.
To avoid discharging the battery, carry out
these adjustments with the engine running.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat.
There is a risk of trapping or pinching passengers if present in the rear seats or jamming the seat if large objects are placed on the floor behind
the seat.
Forwards-backwards (driver's seat) Seat backrest angleSeat cushion height and angle
Ease of use and comfort

79
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
System which registers the electrical settings
of the driver's seat.
Two positions can be stored and recalled, using
the buttons on the side of the driver's seat.
Storing driving positions
Storing a position using
buttons M / 1 / 2
F Switch on the ignition.
F
A djust your seat.
F

P
ress button M , then press button 1 or 2
within four seconds.
An audible signal indicates that the position has
been stored.
Storing a new position cancels the previous
position.
Recalling a stored position
F With the ignition on or the engine running, press button 1 or 2 to recall the
corresponding position.
An audible signal confirms that adjustment is
complete.
You can interrupt the current movement by
pressing button M , 1 or 2 or by using one of the
seat controls.
A stored position cannot be recalled while
driving.
Recalling stored positions is deactivated
45
seconds after switching off the ignition.
3
Ease of use and comfort

80
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Additional adjustments
Head restraint height and angle
(depending on version)
The head restraint is fitted with a frame with
notches which prevents it from lowering; this is
a safety device in case of impact.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
F

T
o raise a head restraint, pull it upwards.
F
To lower the head restraint, press the lug A and the
push the head restraint down at the same time.
F To adjust the angle of the head restraint, tilt
its lower part for wards or backwards.
Removing a head restraint
F To remove the head restraint, press the lug A
a nd pull the head restraint upwards.
F To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
backrest and press the lug A at the same time.
Depending on version, you can fold the sides to
obtain a more comfortable position. F

P
ress the control to obtain the desired
lumbar support.
Electric lumbar adjustment
Relax head restraints
Ease of use and comfort

81
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Electric leg rest
F Press the front or rear part of the control to unfold or fold away the leg rest.
The movement stops when you release the
control.
Activation / Deactivation
Massage function
This function provides the front occupants
with a lumbar massage. It only operates when
the engine is running or in STOP mode of the
Stop
& Start system.
F
P
ress this button.
Adjustment of intensity
Press this button to select one of
the two levels of massage intensity
offered.
Its indicator lamp comes on and the massage
function is activated for a period of 1 hour.
During this time, massage is per formed in
6

cycles of 10 minutes (6 minutes of massage
followed by 4 minutes break).
After one hour, the function is deactivated, the
indicator lamp goes off.
Deactivate the massage function by pressing
this button; its indicator lamp goes off.
Manual passenger seat
3
Ease of use and comfort

82
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Heated seats
F Use the adjustment thumbwheel to switch on and select the desired level of heating:
0: Off.
1 : Low.
2 : Medium.
3 : High.
With the engine running, the front seats can be
heated separately.
Before operating the leg rest, ensure
that nothing could inter fere with its
movement.
F

P

ush the control for wards or backwards to
unfold or fold away the leg rest.
The movement stops when you release the
control.
Electric passenger seat
Do not use the function if the seat is not
occupied.
Reduce the level of heating as soon as
possible.
Once the seat and passenger
compartment are at a comfortable
temperature, you can switch off the
function; reducing electric current
consumption also reduces fuel
consumption. Prolonged use at the highest setting
is not recommended for those with
sensitive skin.
There is a risk of burns for those that
do not have normal perception of heat
(illness, taking medicines, ...).
There is a risk of overheating the
system if material with insulating
properties is used, such as cushions or
seat covers.
Do not use the system:
-

i
f wearing damp clothing,
-
i
f child seats are fitted.
To avoid breaking the heating element
in the seat:
-
d
o not place heavy objects on the
seat,
-
d
o not kneel or stand on the seat,
- d o not place sharp objects on the
seat,
-

d
o not spill liquids onto the seat.
To avoid the risk of short-circuit:
-

d
o not use liquid products for
cleaning the seat,
-

n
ever use the heating function
when the seat is damp.
Ease of use and comfort

84
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Second-row seats
Forwards-backwards adjustment
F Raise the lever A, located at the front of
the seat cushion, and adjust the seat to the
desired position.
The 3 seats in the 2
nd row are independent of each other and are all the same width. Their backrests can be folded to vary the load space in the boot.
A.
F

or wards and backwards adjustment: raise
the lever.
B.
B

ackrest angle adjustment: pull the strap
and guide the seat to the rear.
C.
F

olding the seat: pull the strap up to
release the seat.
D.
F

olding the seat from the rear: pull the
strap then push the seat for ward.
Ease of use and comfort