2017 CITROEN C-ELYSÉE warning

84
C-elysee_en_Chap05_conduite_ed01-2016
In the event of a fault with the system, the indicator   lamp   in   the   "ECO OFF" button
flashes
  for   a   few   moments,   then   comes   on  
c

ontinuously.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.   All   of   the   warning   lamps  
i

n   the   instrument   panel   come   on.   It   is   then  
n

ecessary   to   switch   off   the   ignition   and   start  
t

he   engine   again   using   the   key.
Operating fault
The Stop & Start system requires 
a   12   V   battery   with   a   special  
s

pecification
 a
nd
 t
echnology.
All
  work   on   this   type   of   battery   must   be  
c

arried   out   only   by   a   CITROËN   dealer  
o

r   a   qualified   workshop.
For
  more   information   on   the   12   V  
b

attery,   refer   to   the   corresponding  
s

ection.
Press
 
this
 
button
 
to
 
deactivate
 
the
 
system.
Deactivation
 
is
 
confirmed
 
by
 
illumination
 
of
 
the
 i
ndicator
 
lamp
 
in
 
the
 
button
 
and
 
the
 
display
 
of
 
a

 
message.
Pressing
 
this
 
button
 
again
 
reactivates
 
the
 
s

ystem.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
goes
 
off,
 
a

ccompanied
 
by
 
the
 
display
 
of
 
a
 
message.
Deactivation / Manual
reactivation
In certain cases, such as the need to maintain a   comfortable   temperature   in   the   passenger  
c

ompartment,   it   may   be   useful   to   deactivate   the  
S

top   &   Start   system.
The
  system   can   be   deactivated   at   any   time,  
o

nce   the   ignition   is   on.
If
  the   engine   is   in   STOP   mode,   it   then   restarts.
The
  Stop   &   Start   system   is   reactivated  
a

utomatically   every   time   the   ignition   is  
switched
  on.
Opening the bonnet
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   the   risk   of   injury  
r

elated   to   an   automatic   change   to  
S

TART mode.
Driving on flooded roads
Before
  driving   through   a   flooded   road,  
i

t   is   strongly   recommended   that   you  
d

eactivate   the   Stop   &   Start   system.
For
  more   advice   on   driving,   particularly  
o

n   flooded   roads,   refer   to   the  
c

orresponding
 s
ection.
Driving

90
C-elysee_en_Chap05_conduite_ed01-2016
In bad weather or in winter, ensure that   the   sensors   are   not   covered   with  
m

ud,   ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,   pneumatic   drill,   etc.)   may   trigger  
t

he   audible   signals   of   the   parking  
s

ensor   system.
In
  the   event   of   a   malfunction   of  
t

he   system,   when   reverse   gear  
i

s   engaged   this   warning   lamp  
i

s
 
displayed   in   the   instrument   panel   and/or   a  
m

essage   appears   in   the   screen,   accompanied  
b

y
 
an
 
audible   signal   (short   beep).
Contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Operating fault
The function will be deactivated a
utomatically   if   a   trailer   is   being   towed  
o

r   a   bicycle   carrier   is   fitted   (vehicle  
f

itted   with   a   towbar   or   bicycle   carrier  
r

ecommended   by   CITROËN).
Deactivation / Activation of the
rear parking sensors
The function is deactivated or activated  v ia  t he  v ehicle  c onfiguration  
m

enu.
The
  status   of   the   function   is   stored  
w

hen   the   ignition   is   switched   off.
For
 
more
 
information   on   access   to   the   parking  
s

ensors
 
menu,   refer   to   the   "Personalisation   -  
C

onfiguration"   part   of   the   "Monitoring"   section.
Driving

100
C-elysee_en_Chap07_securite_ed01-2016
Direction indicators
F Left:  lower   the   lighting   stalk   beyond   the  p
oint   of   resistance.
F
 
R
ight:   raise   the   lighting   stalk   beyond   the  
p

oint   of   resistance.
Three flashes of the direction
indicators
F Press  briefly   upwards   or   downwards,  w
ithout   going   beyond   the   point   of  
r

esistance;   the   direction   indicators   will  
f

lash   3   times.
Hazard warning lam ps
Automatic operation of
hazard warning lamps
When braking in an emergency, depending on t
he   deceleration,   the   hazard   warning   lamps  
c

ome   on   automatically.
They
  switch   off   automatically   the   first   time   you  
a

ccelerate.
F
 
Y
ou   can   also   switch   them   off   by   pressing  
t

he   button.
F
 
P
ress   this   button,   all   of   the   direction  
in

dicators
 f
lash.
They   can   operate   with   the   ignition   off.
Horn
F Press
  the   central   part   of   the   steering  w
heel.
Audible
  warning   system   to   alert   other   road  
u

sers   to   an   imminent   danger.
Visual
 
warning
 
with
 
of
 
all
 
the
 
direction
 
i

ndicators
 
flashing
 
to
 
alert
 
other
 
road
 
users
 
to
 
a
 
v

ehicle
 
breakdown,
 
towing
 
or
 
accident.
Safety

102
C-elysee_en_Chap07_securite_ed01-2016
Before reinitialising the system, ensure that the pressures of the four tyres are
correct
  for   the   use   of   the   vehicle   and   in  
l

ine   with   the   recommendations   on   the  
t

yre   pressure   label.
The
  under-inflation   alert   can   only   be  
r

elied   on   if   the   reinitialisation   of   the  
s

ystem   has   done   with   the   pressures   in  
t

he   four   tyres   correctly   adjusted.
The
  under-inflation   detection   system  
d

oes   not   give   a   warning   if   a   pressure   is  
i

ncorrect   at   the   time   of   reinitialisation.
The
 
loss
 
of
 
pressure
 
detected
 
does
 
not
 
a

lways
 
cause
 
visible
 
bulging
 
of
 
the
 
tyre.
 
D

o
 
not
 
satisfy
 
yourself
 
with
 
just
 
a
 
visual
 
c

heck. The
 
alert
 
is
 
maintained
 
until
 
the
 
system
 
i

s
 r

einitialised.
Under-inflation alert
This is given by fixed illumination of t his   warning   lamp,   accompanied   by  
a

n   audible   signal   and   the   display   of   a  
m

essage.
F
 
R

educe   speed   immediately,   avoid  
e

xcessive   steering   movements   and   sudden  
b

raking
F

S

top the vehicle as soon as it is safe to
do so. F
 I f   you   have   a   compressor   (such   as   the   one  
i

n   the   temporary   puncture   repair   kit),   check  
t

he   pressures   of   the   four   tyres   when   cold.  
I

f   it   is   not   possible   to   carry   out   this   check  
s

traight   away,   drive   carefully   at   reduced  
s

peed.
or
F

I
n the event of a puncture, use the
temporary
  puncture   repair   kit   or   the   spare  
w

heel   (depending   on   equipment),
Reinitialisation
It is necessary to reinitialise the system every time   one   or   more   tyre   pressures   are   adjusted,  
a

nd   after   changing   one   or   more   wheels.
Safety

104
C-elysee_en_Chap07_securite_ed01-2016
Vehicles without display screen
F Open  the   glove   box.
F  M ake   a   long   press   on   this   button.
Reinitialisation
  is   confirmed   by   an   low-pitched  
a

udible
 s
ignal.
A
  high-pitched   audible   signal   indicates   that   the  
r

einitialisation   has   not   been   done.
The
  new   pressure   settings   registered   are  
c

onsidered   to   be   reference   values   by   the  
s

ystem.
Operating fault
The under-inflation alert is only d ependable   if   the   system   has   been  
r

einitialised   with   all   four   tyres   inflated   to  
t

he   correct   pressures.
Snow chains
The system does not have to be reinitialised   after   fitting   or   removing  
sn

ow
 c
hains. Before
  doing   anything   to   the   system,  
t

he   pressures   of   the   four   tyres   must   be  
c

hecked   and   the   system   reinitialised.
The
  flashing   and   then   fixed   illumination   of   the  
u

nder-inflation
 w
arning
 lam
p
 a
ccompanied
 b

y   illumination   of   the   Service   warning   lamp  
i

ndicates   a   fault   with   the   system.
In   this   case,   under-inflation   monitoring   of   the  t
yres   is   no   longer   assured.
Have   the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
S

105
C-elysee_en_Chap07_securite_ed01-2016
Group of supplementary systems which help you   to   obtain   optimum   braking   in   complete  
s

afety   in   emergency   situations:
-
 
a
nti-lock   braking   system   (ABS),
-
 
e
lectronic   brake   force   distribution   (EBFD),
-
 
e
mergency   braking   assistance   (EBA).
Braking assistance systems
Anti-lock braking system
and electronic brake force
distribution
Linked systems which improve the stability and manoeuvrability   of   your   vehicle   when   braking,  
i

n   particular   on   poor   or   slippery   sur faces.
Activation
The anti-lock braking system comes into operation   automatically   when   there   is   a   risk   of  
w

heel   lock.
Normal
  operation   of   the   ABS   may   make   itself  
f

elt   by   slight   vibration   of   the   brake   pedal.
Operating fault
Emergency braking assistance
System which, in an emergency, enables you to   obtain   the   optimum   braking   pressure   more  
q

uickly,   thus   reducing   the   stopping   distance.
When
  braking   in   an   emergency,   press  
f

irmly   without   releasing   the   pressure.
When
 
braking
 
in
 
an
 
emergency,
 
press
 
v

ery
 
firmly
 
without
 
releasing
 
the
 
p

ressure. When
 
replacing
 
wheels
 
(tyres
 
and
 
r

ims),
 
ensure
 
that
 
they
 
conform
 
to
 
the
 
ma

nufacturer's
 r

ecommendations.
If
 
this
 
warning
 
lamp
 
comes
 
on,
 
a

ccompanied
 
by
 
an
 
audible
 
signal
 
a

nd
 
a
 
message
 
in
 
the
 
screen,
 
it
 
i

ndicates
 
a
 
malfunction
 
of
 
the
 
anti-lock
 
braking
 
s

ystem
 
which
 
could
 
result
 
in
 
loss
 
of
 
control
 
of
 
t

he
 
vehicle
 
when
 
braking.
If
 
this
 
warning
 
lamp
 
comes
 
on,
 
t

ogether
 
with
 
the
 
STOP
 

and
 
ABS
warning
 
lamps,
 
accompanied
 
by
 
an
 
a

udible
 
signal
 
and
 
a
 
message
 
in
 
the
 
screen,
 
it
 
i

ndicates
 
a
 
malfunction
 
of
 
the
 
electronic
 
brake
 
f

orce
 
distribution
 
which
 
could
 
result
 
in
 
loss
 
of
 
c

ontrol
 
of
 
the
 
vehicle
 
when
 
braking.
You must stop as soon as it is safe to do so.
In
 
either
 
case,
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
Activation
It is triggered by the speed at which the brake p edal   is   pressed.
The
  effect   of   this   is   a   reduction   in   the  
r

esistance   of   the   pedal   and   an   increase   in  
b

raking
 e
fficiency.
Coasting
 
with
 
the
 
engine
 
off
 
results
 
in
 
a
 
l

oss
 
of
 
power
 
assistance
 
for
 
braking.
7
Safety

106
C-elysee_en_Chap07_securite_ed01-2016
Anti-slip regulation (ASR)
and electronic stability
programme (ESP)
The anti-slip regulation (also known as Traction Control)   optimises   traction   to   prevent   skidding o

f   the   wheels,   by   acting   on   the   brakes   of   the
 d

riving   wheels   and   on   the   engine.
The
  electronic   stability   programme   acts   on   the
 b

rake   of   one   or   more   wheels   and   on   the   engine
 t

o   keep   the   vehicle   on   the   trajectory   required   by
 t

he   driver,   within   the   limits   of   the   laws   of   physics.
This
  is   indicated   by   flashing   of   this  
w

arning   lamp   in   the   instrument   panel. The
  ASR /ESP   systems   offer  
e

xceptional   safety   in   normal   driving,   but  
t

his   should   not   encourage   the   driver   to  
t

ake   extra   risks   or   drive   at   high   speed.
The
  correct   functioning   of   these  
s

ystems   depends   on   observation   of  
t

he
 ma
nufacturer's
 r
ecommendations
 r

egarding   the   wheels   (tyres   and   rims),  
t

he   braking   components,   the   electronic  
c

omponents   and   the   assembly  
a

nd   repair   procedures   used   by   the  
C

ITROËN   dealer   network.
After
  an   impact,   have   these   systems  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
Illumination of the warning lamp, accompanid   by   a   message   in   the  
s

creen   indicates   a   malfunction   of  
t

hese   systems.
Reactivation
These systems are reactivated automatically every   time   the   ignition   is   switched   of,   or   from  
3

0   mph   (50   km/h).
F
 
P
ress   this   button   again   to   reactivate   them  
m

anually.
 T

he   lamp   in   the   button   goes   off.
The
  symbol   going   off   in   the   instrument   panel  
i

ndicates   the   reactivation   of   the   ASR   and  
ES

P systems.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round,   ...),   it   may   be   advisable   to   deactivate  
t

he   ASR   and   ESP   systems,   so   that   the   wheels  
c

an   move   freely   and   regain   grip.
Trajectory control systems
Activation
These systems are activated automatically each   time   the   vehicle   is   started.
They
  come   into   operation   in   the   event   of   a   grip  
o

r
 t
rajectory
 pro
blem. The
  display   of   this   symbol   indicates  
t

hat   the   ASR   and   ESP   systems   are  
d

eactivated.
F
 
P
ress   this   button   button,   located   on  
t

he   dashboard   (driver's   side),   until   the  
c

orresponding   symbol   appears   in   the  i
nstrument   panel   screen. T
he   lamp   in   the   button   comes   on.Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   ASR /ESP   systems  
c

hecked.
Coasting   with   the   engine   off   results   in   a
 l

oss   of   power   assistance   for   the   steering.
S

107
C-elysee_en_Chap07_securite_ed01-2016
Seat belts
Front seat belts
Fastening
F Pull  the   strap,   then   insert   the   tongue   in   the  buc
kle.
F
 
C
heck   that   the   seat   belt   is   fastened  
c

orrectly   by   pulling   the   strap.
Unfastening
F Press  the   red   button   on   the   buckle.
F  G uide   the   seat   belt   as   it   is   reeled   in.
The
 
front
 
seat
 
belts
 
are
 
fitted
 
with
 
a
 
p

retensioning
 
and
 
force
 
limiting
 
system.
This
 
system
 
improves
 
safety
 
in
 
the
 
front
 
s

eats
 
in
 
the
 
event
 
of
 
a
 
front
 
or
 
side
 
impact.
 
D

epending
 
on
 
the
 
severity
 
of
 
the
 
impact,
 
the
 p
retensioning
 
system
 
instantly
 
tightens
 
the
 
seat
 b
elts
 
against
 
the
 
body
 
of
 
the
 
occupants.
The
 
pretensioning
 
seat
 
belts
 
are
 
active
 
when
 
t

he
 
ignition
 
is
 
on.
The
 
force
 
limiter
 
reduces
 
the
 
pressure
 
of
 
the
 
s

eat belt on the chest of the occupant, so
improving
 
their
 
protection. When
  the   ignition   is   switched   on,  
t

his   warning   lamp   comes   on   in   the  
i

nstrument   panel,   if   the   driver   has   not  
f

astened   their   seat   belt.
Seat belt not fastened /
unfastened warning lamp
From approximately 12 mph (20 km/h) t
his   warning   lamp   flashes   for   two   minutes  
a

ccompanied   by   an   audible   signal   of   increasing  
v

olume.   Once   these   two   minutes   have   elapsed,  
t

his   warning   lamp   remains   on   until   the   driver  
f

astens   their   seat   belt.
This
  warning   lamp   also   comes   on   in   the  
i

nstrument   panel   if   the   driver   and/or   front  
p

assenger   unfastens   their   seat   belt   while  
d

riving.
7
Safety