2017 CITROEN C-ELYSÉE warning

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

29
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Monochrome screen C (Audio system / Bluetooth)
This displays the following information:
-  t ime,
-
 d

ate,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-
 
s
tatus   of   doors   and   boot,
-
 
p
arking   sensors,
-
 
a
udio   sources   (radio,   CD,   USB   port,  
j

ack socket...),
-
 
t
rip   computer   (refer   to   the   "Instruments   and  
c

ontrols"
 s
ection).
Warning
  or   information   messages   may   appear  
t

emporarily.   These   can   be   cleared   by   pressing  
t

he " BACK "
  button. From
  your   Audio   system   /   Bluetooth   control  p
anel,   you   can   press:
F
the "MENU"
 

button   to   gain   access   to   the  
m

ain menu,
F
the "MODE"
 

button   to   select   the   display  
o

f   information   in   "Full   screen"   or   "New  
w

indow"   mode,
F

t
he "7" or " 8"
  buttons   to   navigate   in   a   list,
F
 
p
ress   the   central   button   to   confirm,


or
F

t
he "BACK "
  button   to   abandon   the  
o

peration   in   progress   or   go   back   up   one  
l

evel   in   the   menu.
Displays in the screenControls
F Press the "MENU" button   to   gain   access  t
o the main menu :
-
 
"
Multimedia",
-
 "

Telephone",
-
 
"
Trip   computer",
-
 
"
Bluetooth   connection",
-
 "

Personalisation-configuration",
F

P
ress the " 7" or " 8" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he   centre   button.
Main menu
1
Monitoring

39
C-elysee_en_Chap02_ouvertures_ed01-2016
Doors
From outside
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   pull   the   door  
han

dle.
Opening
From inside
F Pull  the   interior   control   lever   of   a   front   door;  t
his   unlocks   the   vehicle   completely. -
 
w
hen the engine is running
,
this   warning   lamp   comes   on,  
a

ccompanied   by   a   message   in  
t

he   multifunction   screen   for  
a   few   seconds,
-  
w
hen the vehicle is moving   (speed  
h

igher   than   6   mph   (10   km/h)),   this   warning  
l

amp   comes   on,   accompanied   by   an  
a

udible   signal   and   a   message   in   the  
m

ultifunction   screen   for   a   few   seconds.
Closing
When a door is not closed correctly:
Secondary control
For mechanically locking and unlocking the d
oors   in   the   event   of   a   fault   with   the   central  
l

ocking   system   or   a   battery   failure.
Driver's door
Insert the key in the lock to lock or unlock the do o r.
Passenger doors
F On   the   rear   doors,   check   that   the   child   lock  i
s   not   on.
F
 
R
emove   the   black   cap   located   on   the   edge  
o

f   the   door,   using   the   key.
F
 
I
nsert   the   key   into   the   aperture   without
 f

orcing,   then   without   turning,   move   the   latch
 s

ideways   towards   the   inside   of   the   door.
F
 
R
emove   the   key   and   refit   the   cap.
2
Access

40
C-elysee_en_Chap02_ouvertures_ed01-2016
Boot
Opening
Unlocking and releasing the boot
using the remote control
F Press the centre button on the remote   control   for   more   than  
on

e second.
The
  boot   lid   is   released   and   opens  
s

li g ht l y.
Releasing the boot from the
inside
Opening the boot
F Raise  the   boot   lid   to   its   fully   open   position.
F  
L
ower   the   boot   lid   using   one   of   the   interior  
g

rab
 han
dles.
Closing
Electric boot opening
- when the engine is running , this
warning lam p c omes o n, a ccompanied b

y   a   message   in   the   multifunction
 s

creen   for   a   few   seconds,
- when the vehicle is moving   (speed   above 
6   mph   (10   km/h)),   this   warning   lamp   comes o

n,   accompanied   by   an   audible   signal   and
 
a

  message   in   the   multifunction   screen   for
 
a

  few   seconds.
F
 
P

ress
 
the
 
boot
 
opening
 
switch
 
located
 
o

n
 
the
 
left
 
of
 
the
 
dashboard
 
(electric
 
boot
 
o

pening).


or
Mechanical boot opening
There is no associated warning for the boot lid n ot   being   fully   closed.
You
  should   ensure   that   the   boot   is   closed  
c

o r r e c t l y.
If
  the   boot   is   not   closed   correctly:
F
 
R

aise
 
the
 
control
 
lever
 
below
 
the
 
driver's
 
d

oor
 
(mechanical
 
boot
 
opening).
The
 
boot
 
lid
 
is
 
released
 
and
 
opens
 
slightly.
Access

42
C-elysee_en_Chap02_ouvertures_ed01-2016
Windows
Electric controls Manual controls
The electric window switches remain operational   for   about   45   seconds   after  
s

witching   off   the   ignition   or   until   a   front  
d

oor   is   opened.   During   this   period   of  
4

5   seconds,   if   you   open   a   door   while  
o

perating   a   window,   the   window   stops.  
O

perating   the   switch   again   has   no  
e

ffect   until   the   ignition   is   switched   on  
ag

ain. Always
  remove   the   key   from   the   ignition  
w

hen   leaving   the   vehicle,   even   for   a  
s

hort   time.
In   the   event   of   contact   during   operation  
o

f   the   windows,   you   must   reverse   the  
m

ovement   of   the   window.   To   do   this,  
p

ress   the   switch   concerned.
When   operating   the   passenger   electric  w
indow   switches,   the   driver   must  e
nsure   that   no   one   is   preventing   correct  
c

losing   of   the   windows.
The
  driver   must   ensure   that   the  
p

assengers   use   the   electric   windows  
c

o r r e c t l y.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
1.
L

eft hand front electric window.
2.
R

ight hand front electric window.
3.
R

ight hand rear electric window.
4.
L

eft hand rear electric window.
5.
D

eactivating the rear electric window
switches .
To
 
open   or   close   the   window,   press   or   pull   the  
s

witch.  
T
he  
w
indow  
s
tops  
a
s  
s
oon  
a
s  
t
he  
s
witch  
i

s
 r

eleased.
Turn
 
the
 
window
 
winder
 
located
 
on
 
the
 
door
 
t

rim
 pan

el.
Deactivating the rear window
controls
For the safety of your children, press switch 5
t o   prevent   operation   of   all   of   the   windows,  
i

rrespective   of   their   position.
With
  the   warning   lamp   on,   the   switches   are  
d

eactivated.   With   the   warning   lamp   off,   the  
s

witches   are   active.
Model with front electric windows
Model with front and rear electric windows
Access

62
C-elysee_en_Chap04_amenagements_ed01-2016
Storage box
F Raise the boot floor for access to the storage   box.
This
  has   areas   for   the   storage   of   a   box   of   spare  
b

ulbs,   a   first   aid   kit,   two   warning   triangles...
It
  also   houses   the   vehicle   tools,   the   temporary  
p

uncture   repair   kit...
Fittings

65
C-elysee_en_Chap05_conduite_ed01-2016
In certain cases, you may have to apply more   force   to   the   steering   (wheels   on  
f

ull   lock,   for   example).
Starting the engine
F With  a   petrol   engine,   operate   the   starter  m
otor   by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil   the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key. F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2
,   ignition   on,   to   operate   the  
eng

ine
 p
re-heating
 s
ystem.
With   the   parking   brake   applied   and   the   gearbox  
i

n neutral or position N or P
:
F  
d
epress   the   clutch   pedal   fully   (manual  
g

earbox),


or
F  
p
ress   the   brake   pedal   firmly   (electronic   or  
a

utomatic   gearbox),
F  
i
nsert   the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code,
F  
u
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and  
t

he key.
Wait until this warning lamp goes off in the i
nstrument   panel   then   operate   the   starter m

otor   by   turning   the   key   to   position 3
without
  pressing   the   accelerator   pedal,
 u

ntil   the   engine   starts.   Once   the   engine   is
 r

unning,   release   the   key.
If the engine does not start straight away,   switch   off   the   ignition.   Wait   a  
f

ew   moments   before   operating   the  
s

tarter   motor   again.   If   the   engine   does  
n

ot   start   after   several   attempts,   do   not  
k

eep   trying:   you   risk   damaging   the  
s

tarter   motor   or   the   engine.   Contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop.
In
  wintry   conditions,   the   warning   lamp  
c

an   stay   on   for   a   longer   period.   When  
t

he   engine   is   hot,   the   warning   lamp  
d

oes   not   come   on. Never   leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.
In   very   severe   wintry   conditions  
(

temperatures   below   -23°C),   to   ensure  
t

he   correct   operation   and   durability   of  
t

he   mechanical   components   of   your  
v

ehicle,   engine   and   gearbox,   it   is  n
ecessary   to   leave   the   engine   running  f
or   4   minutes   before   moving   off.
In
  temperate   conditions,   do   not   leave  
t

he   engine   at   idle   to   warm   up   but   move  
o

ff   straight   away   and   drive   at   moderate  
s

peed.
5
Driving

67
C-elysee_en_Chap05_conduite_ed01-2016
Parking brake
Application
F Pull  the   parking   brake   lever   up   to  i
mmobilise   your   vehicle.
Release
F Pull  the   parking   brake   lever   up   gently,  p
ress the release button then lower the
lever
 f

ully.
When
  parking   on   a   slope,   direct   your  
w

heels   against   the   kerb,   apply   the  
p

arking   brake,   engage   a   gear   and  
s

witch   off   the   ignition.
When the vehicle is being driven, if this warning lamp   and   the   STOP  warning   lamp   come o

n,   accompanied   by   an   audible   signal   and
 
a message in the screen, indicating that the parking brake   is   still   on   or   has   not   been   fully   released.
5
Driving