2017 Citroen BERLINGO display

252
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth
® mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth® menu of your device, select
the
 
system
 
name   in   the   list   of   devices   detected.
Enter a code of at least 4 figures in the device
and
 
confirm. Enter this same code in the system,
select " OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth® function
and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the
primary
 pag

e.
Press
 
on
 
the
 
secondary
 
page.
Select " Bluetooth connection ".
Select " Search for devices ".
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended that you switch the Bluetooth®
function
 
on
 
your
 
telephone
 
off
 
and
 
then
 
on
 
again.
Select the name of the
desired peripheral from the
list and " Confirm ".
Enter a code of at least 4 figures for
the connection then " Confirm".
Enter this same code in the telephone then
accept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying of audio files from the telephone),
-

i

n " Internet " (internet browsing, only if your
telephone is compatible with the "DUN"
Dial-Up
 
Networking   Bluetooth
® standard).
Select
 
one
 
or
 
more
 
profiles
 
and
 
confirm.
Audio and Telematics

253
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
The services available depend
on  the   network,   the   SIM   card   and  
t

he compatibility of the Bluetooth
®
telephone
 
used.
 
Check
 
the
 
telephone  
m

anual
 
and
 
with
 
your
 
network
 
provider  
f

or details of the services available
to you.
The ability of the system to connect
with only one profile depends on the
telephone.
 
The
 
three
 
profiles
 
may
  all  
c

onnect
 
by
 
default.
Visit
 
www.citroen.co.uk
 
for
 
more
 
information  
(

compatibility,
 
additional
 
help,
 
...).
The recognised telephone
appears
 
in
 
the
 
list.
Depending on your telephone, you may be
asked
 
to
 
accept
 
automatic
 
connection
 
every  
t

ime
 
the
 
ignition
 
is
 
switched
 
on. On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically and within around 30 seconds
after switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth
® activated).
To modify the automatic connection mode,
select the telephone in the list then select the
desired
 p

rofile.
Depending on the type of telephone,
the
 
system   will   ask   you   to   accept   or   not  
t

he
 
transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode had been activated during the
pairing
 p

rocedure.
The connection is confirmed by the display of a
message
  and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search for devices ".
The connection is confirmed by the display of a
message
 
and   the   name   of   the   telephone.
Audio and Telematics
TECHNOLOGY on BOARD
10

254
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well  as   the   deletion   of   a   pairing. Using the telephone is not
recommended
  while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
Or "Connect / Disconnect " to start or
end the Bluetooth connection with
the
  selected   device.
Or "Delete "
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a
superimposed  display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on the steering mounted TEL button
to
  reject   the   call.
Or Select "End call".
Making a call
Calling a new number
Press on Telephone to display the
primary pag e.
Enter the phone number using the
digital
 k

eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to display the
primary pag e.
Or
  make   a   long   press
on the steering mounted TEL
 

button.
Audio and Telematics

255
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone to display the
primary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone to display the
primary pag e.
Select " Contacts ".
Select " View".
Select " Create" to add a new contact,
observing
  the   "international   format".
Or "Modify "
  to   edit   the   selected   contact.
Or "Delete " to delete the selected
contact.
Or "Delete all " to delete all information
for
  the   selected   contact. Select "
By name" to view the list of
contacts.
Audio and Telematics
TECHNOLOGY on BOARD
10

 257
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On starting, it is several minutes before the system begins to receive
the
  traffic   information. Wait until the traffic information is being received
correctly (display of the traffic information icons
on
  the   map).
The
  filters   are   too   restrictive. Modify
  the   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait until the system has completed starting
up, so that there is GPS coverage of at least
4 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s dependent on the GPS signal reception
conditions.
Audio and Telematics
TECHNOLOGY on BOARD
10

258
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Radio
QUESTIONANSWER SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through
  which   the   vehicle   is   travelling.Activate the "RDS" function by means of the
short-cut
  menu   to   enable   the   system   to   check  
w

hether there is a more power ful transmitter in
the
  geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This phenomenon is normal and does not indicate
a
  fault   with   the   audio   system.
The aerial is absent or has been damaged (for example when going
through
  a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I cannot find some radio
stations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.Press on the "Update list" function in the system
to
  update   the   list   of   stations   received.
Some radio stations send other information in place of their name
(the
  title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The name of the radio
station
 c

hanges.
Audio and Telematics

259
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Media
QUESTIONANSWER SOLUTION
Playback   of   my   USB  
m

emory   stick   starts   only  
a

fter a very long wait
(around
  2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd limit the number of sub-folders in the file
structure
  on   the   memory   stick.
When I connect my iPhone
as telephone and to the
USB port at the same time,
I am unable to play the
music
 
files. When the iPhone connects automatically as a telephone, it forces
the
  streaming   function.   The   streaming   function   takes   the   place   of  
t

he USB function which is then not useable, there is a period without
sound
  of   the   track   being   played   with   Apple
® players.D isconnect and reconnect to the USB port (the
USB   function   takes   priority   over   streaming).
Some characters in the
media information are not
displayed correctly while
playing. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types   of   characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing of streaming files
does
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support   automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed on the screen
when
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer   of   this   information.
Audio and Telematics
TECHNOLOGY on BOARD
10

262
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
QUESTIONANSWER SOLUTION
I cannot connect my
Bluetooth
 t

elephone. The telephone's Bluetooth function may be switched off or the
telephone
  may   not   be   visible. Check
  that   your   telephone's   Bluetooth   function   is  
s

witched   on.
Check
  in   the   telephone   settings   that   it   is   " Visible  
t

o   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your   telephone  
a

t   www.citroen.co.uk   (services).
The volume of the
telephone connected
in Bluetooth mode is
inaudible. The
  volume   depends   both   on   the   system   and   on   the   telephone.Increase the volume of the audio system, to
maximum if required, and increase the volume of
the
  telephone   if   necessary.
The ambient noise level has an influence on the quality of telephone
communication. Reduce the ambient noise level (close the
windows, reduce the booster fan speed, slow
down...).
Some contacts are
duplicated
  in   the   list. The options for synchronizing contacts are synchronizing the
contacts
  on   the   SIM   card,   the   contacts   on   the   telephone,   or   both.  
W

hen both synchronizations are selected, some contacts may be
duplicated. Select "Display SIM card contacts" or "Display
telephone
 c

ontacts".
Contacts are not shown in
alphabetical
 o

rder. Some
  telephones   offer   display   options.   Depending   on   the   settings  
c

hosen,   contacts   can   be   transferred   in   a   specific   order.Modify the display setting in the telephone
di r e c to r y.
The system does not receive
SMS
 
text   messages. The Bluetooth mode does not permit sending SMS text messages to
the
  system.
Telephone
Audio and Telematics