2017 BMW 7 SERIES Owners Manual

'yPerson warning with City light braking
function, refer to page 149.'yNight Vision with pedestrian and animal
detection, refer to page 152.'yLane departure warning, refer to
page 155.'yActive Blind Spot Detection, refer to
page 158.'ySide collision warning, refer to page 162.
Safety
information
WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys#j
tem may not be output or they may be output
too late or incorrectly. There is a risk of an ac#j
cident. Adjust the driving style to the traffic conditions. Watch traffic closely and activelyintervene in the respective situations.'

Press and hold this button:All Intelligent Safety systems are
switched off.
Approach
control
warning with
light
braking
function
Concept
The system can help prevent accidents. If an accident cannot be prevented, the system willhelp reduce the collision speed.
The system sounds a warning before an immi#j
nent collision and actuates brakes independ#j
ently, if needed.
General
information The system is controlled using a camera.
If the vehicle is equipped with Active Cruise
Control with Stop & Go function, ACC, the ap#j
proach control warning is additionally control#j led via the cruise control radar sensor.
The approach control warning is available even
if cruise control has been deactivated.
With the vehicle approaching another vehicle
intentionally, the approach control warning and
braking are delayed in order to avoid false sys#j
tem reactions.
The system issues a two-phase warning of a
possible risk of collision with vehicles at
speeds above approx. 3 mph/5 km/h. Time of
warnings may vary with the current driving sit#j
uation.Detection
range
Objects are responded to if they are detected
by the system.
Safety
information WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys#j tem may not be output or they may be output
too late or incorrectly. There is a risk of an ac#j cident. Adjust the driving style to the traffic
conditions. Watch traffic closely and activelyintervene in the respective situations.'

Overview
Button
in
the
vehicle
Intelligent Safety
Camera
The camera is installed near the interior mirror. Keep the windshield in front of the interior mir#j
ror clean and clear.
With
Active
Cruise
Control:
radar
sensor
The radar sensor is located in the lower area of
the front bumper.
Always keep radar sensor clean and unob#j
structed.
Switching
on/off
Switching
on
automatically The system is automatically active after every
driving off.
Switching
on/off
manually Press button:
The menu for the intelligent safety
system is displayed.
If all Intelligent Safety systems were switched off, all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment version, the Intelligent Safety sys#j tems can be individually configured. The indi#j
vidual settings are activated and stored for the
driver profile currently used. As soon as a set#j ting is changed on the menu, all settings of the
menu are activated.
Press button repeatedly.
The following settings are switched
between:
"ALL ON": all Intelligent Safety systems are switched on. Basic settings are activated for
the subfunctions.
"INDIVIDUAL": the Intelligent Safety systems
are switched on according to the individual
settings.
Some Intelligent Safety systems cannot be in#j
dividually switched off.
Press and hold this button:
All Intelligent Safety systems are
switched off.Seite 147SafetyControls147
Online Edition for Part no. 0140 2 974 740 - VI/16

ButtonStatusButton lights up green: all IntelligentSafety systems are switched on.Button lights up orange: some Intel#j
ligent Safety systems are switched
off.Button does not light up: all Intelli#j
gent Safety systems are switched
off.
Setting
the
warning
time
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Intelligent Safety"4."Frontal Collision Warn."5.Select the desired setting.
The selected time is stored for the driver pro#jfile currently used.
Warning
with
braking
function
Display
If a collision with a recognized vehicle is immi#j
nent a warning symbol appears in the instru#j
ment cluster and in the Head-Up Display.
SymbolMeasureSymbol lights up red: prewarning.
Brake and increase distance.Symbol flashes red and an acoustic signal sounds: acute warning.
You are requested to intervene by
braking or make an evasive maneu#j
ver.Prewarning
This warning is issued, e.g., when there is the impending danger of a collision or the distanceto the vehicle ahead is too small.
The driver must intervene actively when there
is a prewarning.
Acute
warning
with
braking
function
Acute warning is displayed in case of the immi#j nent danger of a collision when the vehicle ap#j
proaches another object at a high differential
speed.
The driver must intervene actively when there
is an acute warning. If necessary, the driver is
assisted by an automatic braking intervention
in a possible risk of collision.
Acute warnings can also be triggered without
previous forewarning.
Brake
intervention,
City
light
braking
function
The warning prompts the driver himself/herself
to react. During a warning, the maximum brak#j ing force is used when the brake is actuated.
Prerequisite is sufficiently quick and hard step#j ping on the brake pedal.
The system can additionally assist possibly
with automatic braking intervention if there is a risk of a collision.
At low speeds the vehicle can be decelerated
to a complete stop.
The braking intervention takes place up to ap#j
prox. 50 mph/80 km/h.
The braking intervention is executed only if ve#j
hicle stability has not been restricted, e.g., by
deactivating the DSC Dynamic Stability Con#j
trol.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by ac#j
tively moving the steering wheel.
Object detection can be restricted. Observe
the limitations of the detection range and func#j tional restrictions.Seite 148ControlsSafety148
Online Edition for Part no. 0140 2 974 740 - VI/16

With
radar
sensor
and
Active
Cruise
Control:
braking
intervention
The warning prompts the driver himself/herselfto react. During a warning, the maximum brak#jing force is used when the brake is actuated.
Prerequisite is sufficiently quick and hard step#j ping on the brake pedal.
The system can assist with automatic braking
intervention if there is a risk of a collision.
The braking intervention can bring the vehicle
to a complete stop.
The braking intervention is executed only if ve#j
hicle stability has not been restricted, e.g., by deactivating the DSC Dynamic Stability Con#j
trol.
Above approx. 130 mph/210 km/h the braking
intervention occurs as a brief braking pressure. No automatic delay occurs.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by ac#j
tively moving the steering wheel.
Object detection can be restricted. Observe
the limitations of the detection range and func#j
tional restrictions.
System
limits
Safety
information WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe the information regarding the system limits
and actively intervene, if needed.'

lision with pedestrians, and support with abraking function.
General
information
The system is active at speeds of approx.
6 mph/10 km/h up to approx. 35 mph/60 km/h.
Under those circumstances it reacts to people
who are within the detection range of the sys#j
tem.
The camera in the area of the rearview mirror
controls the system.
Detection
range
The detection area in front of the vehicle is div#jided into two areas:
'yCentral area, arrow 1, directly in front of thevehicle.'yExpanded area, arrow 2, to the right and
left.
A collision is imminent if pedestrians are lo#j
cated within the central area. A warning is is#j
sued about pedestrians who are located within the extended area only if they are moving inthe direction of the central area.
Safety
information WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys#j
tem may not be output or they may be output
too late or incorrectly. There is a risk of an ac#j
cident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively intervene in the respective situations.'

Switching
on/off
Switching
on
automatically The system is automatically active after every
driving off.
Switching
on/off
manually Press button:
The menu for the intelligent safety
system is displayed.
If all Intelligent Safety systems were switched off, all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment version, the Intelligent Safety sys#j tems can be individually configured. The indi#j
vidual settings are activated and stored for the
driver profile currently used. As soon as a set#j ting is changed on the menu, all settings of the
menu are activated.
Press button repeatedly.
The following settings are switched
between:
"ALL ON": all Intelligent Safety systems are switched on. Basic settings are activated for
the subfunctions.
"INDIVIDUAL": the Intelligent Safety systems
are switched on according to the individual
settings.
Some Intelligent Safety systems cannot be in#j
dividually switched off.
Press and hold this button:
All Intelligent Safety systems are
switched off.ButtonStatusButton lights up green: all Intelligent Safety systems are switched on.Button lights up orange: some Intel#j
ligent Safety systems are switched
off.Button does not light up: all Intelli#j
gent Safety systems are switched
off.
Warning
with
braking
function
Display
If a collision with a person detected in this way
is imminent, a warning symbol appears on the
instrument cluster and in the Head-up Display.
The red symbol is displayed and a sig#j
nal sounds.
Intervene immediately by braking or make an
evasive maneuver.
Braking
intervention
The warning prompts the driver himself/herself
to react. During a warning, the maximum brak#j
ing force is used when the brake is actuated.
Prerequisite for the brake booster is suffi#j
ciently quick and hard stepping on the brake pedal.
The system can additionally assist with braking intervention if there is a risk of a collision.
At low speeds the vehicle can be decelerated
to a complete stop.
The braking intervention is executed only if ve#j
hicle stability has not been restricted, e.g., by
deactivating the DSC Dynamic Stability Con#j
trol.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by ac#j
tively moving the steering wheel.
Seite 151SafetyControls151
Online Edition for Part no. 0140 2 974 740 - VI/16

Object detection can be restricted. Observe
the limitations of the detection range and func#j tional restrictions.
System
limits
Safety
information WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of accidents or risk of property damage. Observethe information regarding the system limits
and actively intervene, if needed.'