2017 BMW 4 SERIES COUPE Owners Manual

Adjusting
the
height'yTo raise: push the head restraint up.'yTo lower: press button, arrow 1, and push
head restraint down.
Tilt
Three different tilt positions are available.
'yForward: pull the top edge of the head rej
straint forward, arrow 1.'yBack: press the button, arrow 2. The head restraint folds as far back as possible.
Removing
Only remove the head restraint if no one will besitting in the seat in question.
1.Raise the head restraint up against the rej
sistance.2.Press button, arrow 1, and pull the head rej
straint out completely.
Seat
and
mirror
memory
Concept
Two driver's seat and exterior mirror positions
can be stored per profile and called up. Setj tings for the backrest width and lumbar supjport are not stored in memory.
Safety
information WARNING
Using the memory function while driving
can lead to unexpected movements of the seat. Vehicle control could be lost. There is a
risk of an accident. Only retrieve the memory function when the vehicle is stationary.'

Overview
Storing
1.Switch on the ignition.2.Set the desired position.3. Press button. The LED in the butj
ton lights up.4.Press selected button 1 or 2 while the LED
is lit. The LED goes out.
Button was pressed inadvertently:
Press button again.
The LED goes out.
Calling
up
settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is pressed.
While driving, the seat position adjustment on the driver's side is interrupted after a short
time.
Calling
up
of
a
seat
position
deactivated
After a brief period, calling up stored seat posij tions is deactivated to save battery power.
To reactivate calling up of a seat position:
'yOpen and close the door or tailgate.'yPress a button on the remote control.'yPress the Start/Stop button.Mirrors
Exterior
mirrors
General
information The mirror on the passenger side is more
curved than the driver's side mirror.
Depending on the vehicle equipment, the mirj
ror setting is stored for the profile currently
used. When the vehicle is unlocked via the rej
mote control, the position is automatically rej
trieved if this function is active.
Safety
information WARNING
Objects reflected in the mirror are closer
than they appear. The distance to the traffic
behind could be incorrectly estimated, e.g.,
while changing lanes. There is a risk of an accij dent. Estimate the distance to the traffic bej
hind by looking over your shoulder.'

Adjusting
electricallyPress button.
The mirror movement follows the butj ton movement.
Saving
positions The current exterior mirror position can be
stored via the seat and mirror memory.
Adjusting
manually
In case of electrical malfunction press edges of
mirror.
Automatic
Curb
Monitor
Concept
If reverse gear is engaged, the mirror glass on
the front passenger side is tilted downward.
This improves your view of the curb and other
low-lying obstacles when parking, e.g.
Activating1. Slide the switch to the driver's side
mirror position.2.Engage selector lever position R.
Deactivating
Slide the switch to the passenger side mirror
position.
Folding
in
and
out NOTE
Depending on the vehicle width, the vej
hicle can be damaged in vehicle washes. There is a risk of property damage. Before washing,
fold in the mirrors by hand or with the button.'

Interior
mirror,
automatic
dimming
feature
Overview
Photocells are used for control:
'yIn the mirror glass.'yOn the back of the mirror.
Functional
requirements
'yKeep the photocells clean.'yDo not cover the area between the inside
rearview mirror and the windshield.
Steering
wheel
Safety
information WARNING
Steering wheel adjustments while driving
can lead to unexpected steering wheel movej ments. Vehicle control could be lost. There is arisk of an accident. Adjust the steering wheelwhile the vehicle is stationary only.'

Transporting
children
safelyVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., dueto the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
The
right
place
for
children
Safety
information
WARNING
Unattended children or animals can
cause the vehicle to move and endanger themj selves and traffic, e.g., due to the following acj
tions:'yPressing the Start/Stop button.'yReleasing the parking brake.'yOpening and closing the doors or winj
dows.'yEngaging selector lever position N.'yUsing vehicle equipment.
There is a risk of accidents or injuries. Do not leave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

WARNING
The stability of the child restraint system
is limited or compromised with incorrect seat adjustment or improper installation of the childseat. There is a risk of injuries or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, adj
just the backrest tilt for all affected backrests
and correctly adjust the seats. Make sure that
seats and backrests are securely engaged. If
possible, adjust the height of the head rej
straints or remove them.'

Locking
the
safety
belt1.Pull out the belt strap completely.2.Secure the child restraint system with the
safety belt.3.Allow the belt strap to be pulled in and pull it tight against the child restraint system.
The safety belt is locked.Unlocking
the
safety
belt1.Unbuckle the belt buckle.2.Remove the child restraint system.3.Allow the belt strap to be pulled in comj
pletely.
LATCH
child
restraint
fixing
system
General
information
LATCH: Lower Anchors and Tether for Chilj
dren.
Pay attention to the operating and safety inforj mation of the child restraint system manufacjturer when installing and using LATCH child
restraint fixing system.
Mounts
for
the
lower
LATCH
anchors The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child
is restrained by the internal harnesses.
Safety
information WARNING
If the LATCH child restraint fixing sysj
tems are not correctly engaged, the protective
effect of the LATCH child restraint fixing sysj
tem can be limited. There is a risk of injuries or
danger to life. Make sure that the lower anj
chors are securely engaged and that the
LATCH child restraint fixing system fits sej curely against the backrest.'

Only mount child restraint systems to the upjper retaining straps.'