2017 AUDI A8 display

Audi connect
Data u sage info
The numbe r of data packets that are sent and re­
ceived through the M MI is displayed . You can re­
set the data usage information to zero using the
Reset d ata u sage option .
Start automatic configuration
An online profile is set up and configu red auto­
mat ica lly. The connection settings that you
changed manua lly are reset to the defau lt set­
tings.
Online status overview
An on line status overview with information abo ut
your data connect io n (such as the cell phone
service provider) is shown in the Infotainment
disp lay .
Sw itching the data connection module off
The data connection module is sw itched off. An
I n ternet connect ion is no longe r poss ible.
Network sett ings
Under Login , select Auto to log into a network
automatically or select
Manu al to select from a
list of networks w ith in range. The available net­
works in the area can be selected i n the
Network
se lection
list. Th is function is on ly availab le when
Manual Login is set.
Serial number (IMEi)
The se rial number for the MMI that is installed is
d isplayed .
A WARNING
-As the driver, do not allow usage of the Wi­
Fi hotspot to dist ract you from d riving, as
t h is could inc rease the risk of an accident.
- It is only safe to use tab lets and s imilar mo­
bile devi ces when the vehicle is s tat ionary
because, like all loose objects, they could be
thrown aro und the i nside of the vehicle
when invo lved in an accident and can cause
serious injuries. Store these types of devices
sec urely whi le driving.
- Do not use any w ireless devices on the front
seats w ith in range of the a irbags while d riv-
162
ing . Also read the warnings in the chapter
¢page 207 .
(D Note
You are responsible for all precaut ions taken
for data p rotection, anti-virus protection and
protection against loss o f data on mobi le de ­
v ices that are used to access the Internet
through the W i-F i hotspot.
(D Tips
- When using On line map view, you are
prompted again to allow roam ing before
connect ing to a foreign mob ile network.
- The speed of the data connection may vary
depending on the veh icle location, the cov­
erage area of your cell phone service provid­
er and if the recommended p rovider is used
or not .
- A data connection cannot be established if
incorrect data is ente red in the
Connection
s ettings .
-The W i-F i hotspot recept ion quality depends
on the sig nal st rengt h and the availabi lity of
the mobile network. You can obtain more
information from your cell phone se rvice
prov ider.
About Audi connect
Audi connect services
App lies to: vehicles wi th Audi connect
(D Tips
-You can only use services supported by Aud i
co nnect if you have the optional MMI Nav i­
gation pl us equ ipme nt and Audi connect.
- Audi connect is designed for use only with
the p rovided Aud i SIM card . Rece iving data
packets from t he Internet w ill quickly in­
c rease the vo lume of d ata used. Fo r more
information, contac t Aud i connect custome r
support at 877 -SOS -AUD I (2834).
- Th e Aud i connec t se rvices are availab le in
the USA. Audi connect serv ices are currently
not avai lable i n Canada or in Mexico. ..,.

0 co .... N ,..._
N .... 0 0 :c ' -Availability, scope, providers, screen display
and costs of services may vary depending on
the country, model, model year, end device
and rates. Additional information can be
found under
www.audiusa.com/audicon­
nect.
- An initial registration/activation on the
myAudi platform at my.audiusa.com is nec­
essary to use individual services. You can
contact an authorized Audi dealer or Audi
connect Support at 877-505-AUDI (2834)
to receive information on options for ex­ panding your usage and any costs that may
result.
- It is only possible to use Audi connect serv­
ices with a valid Audi SIM card.
- To ensure all of the Audi connect features
work correctly , Audi recommends setting up
a data service and Wi-Fi package with your
cell phone service provider. Your cell phone
service provider can be authorized by law,
through a judicial order or other lawful in­
structions, to disclose the position of your
vehicle. Additional information on your cell
phone service provider's privacy policies can
be found in their Terms of Use .
- The availability of Audi connect services,
such as weather information, depends on
the cell phone service provider .
- You can specify when the MMI establishes
an online connection
¢ page 161 . The Inter­
net connection ends automatically when the
Audi connect service in use no longer re­
quires any data packets.
- The Audi connect services are a Wi-Fi/Inter­
net-based system.
If the system does not
function correctly even though all of the re­
quirements are met, please try again later
or contact Audi connect Support at
877-505-AUDI (2834).
- For detailed information on Audi connect
and the Terms of Use, visit
www.audiusa.com/audiconnect.
Audi connect
Privacy protection
App lies to : vehicles wi th Audi connect
{I) Tips
- Your privacy is important to us.
- AUDI AG collects, processes, shares and
transmits your personal information in ac­
cordance with legal regulations in order to
ensure proper function and availability of
the individual Audi connect services. You
can view the complete, current and valid
Audi connect data protection policy in your MMI. The my Audi website is available for to
you to activate additional Audi connect serv­ ices and to transfer data with your vehicle,
among other services. A one-time registra­
tion is required to establish a connection to
your vehicle. For this purpose, AUDI AG col­
lects, processes, transmits and uses your re­
quired personal information as required for
you to use the services provided by AUDI
AG. Your information is not distributed to
third parties. Using your cell phone with the
help of your myAudi platform, you can
transfer information for Audi connect serv­
ices functions to your vehicle and allow spe­
cific information to be transmitted from
your vehicle .
- By activating special information services
that are part of your Audi connect portfolio,
you can use these functions directly in your
vehicle by entering data to confirm your
identity (to use social networks, for exam­
ple). To do this, the identification informa­
tion you provided is forwarded with the re­
quest to the respective service provider .
Then you can access your personal content
using a secure connection. This content is
displayed in the vehicle for your use. Your
personal content is not stored within Audi
AG . The necessary connection information is
processed and used for providing services
and the proper function of the services in
accordance with applicable legal guidelines.
- By providing Audi connect services , Audi of
America is authorized to collect, process,
transmit and transfer information about
163

C) C0 ....
"' " "' .... 0 0 :r Navigation
Opening navigation
Applies to: vehicles with navigation system
The navigation system directs you to your desti­
nation, around traffic incidents and on alterna­ tive routes,
if desired.
Fig . 179 Examp le: online map view
• Select: INAVI button.
After se lecting Navigation, the last menu that
was open is displayed.
- Sw itc hin g bet ween the m ap and th e dest ina­
t io n entr y:
press the !NAV ! button aga in.
,& WARNING
- T he demands of traffic require yo ur full at­
tent ion. Read and fo llow the guidelines pro­
vided in
~ page 134.
- Obey all traffic laws whe n driving.
- T he route calcu lated by the navigation sys-
tem is a recommendat ion for reaching your
des tination. Obey traffic lights, stopping re ­
strictions, one -way streets, lane change re ­
strictions, etc .
(D Note
- If the driving directions conflict with traffic
l aws, obey the traff ic laws.
- To reduce the risk of an ac cident, adjust the
vo lume of the navigation system so that sig­
nals from outside the vehicle, such as po lice
and fire sirens, can be heard easily at all
times.
Na vigat ion
(D Tips
-Snow and obstructions on the GPS antenna
or interference caused by trees and large
buildings can impair satellite reception and
affect the system's ability to determine the
vehicle position. Several deactivated or mal­
functioning satell ites can also interrupt GPS
recept ion and affect the system's ability to
determine the vehicle position.
- Because street names somet imes change,
the names stored in the MMI may in rare
cases d iffer from the actual street name.
- Contact your authorized Audi dealer for in­
formation on updating the navigation data.
- The navigation system can be opened in
Dem o m od e for s imulations or p lanning
purposes
9 page 174.
Entering a destination
Entering an address
Applies to : vehicles wit h navig ation system
Fig. 180 Entering a destination city
• Select: !NAV ! button> Route guida nce control
button
> Addr ess .
- Chan ging the c ount ry :
select and conf irm
C ount ry. Enter a country.
-Ent ering a d estin ation using the C ity/Zi p: se­
lect and confirm
City/Zi p. Enter a city or a ZIP
code using the speller. Select and confirm a city
from the list . Select and confirm additional de­
tails about the destinat ion, such as
Add str ee t,
S et as s topo ver, Set po int of int eres t in
cit y9
page 167 or S et di str ict. Start route
guidance .
165

Navigation
- Entering a destination using a street:
select
and confirm
Street. Select and confirm a city
from the list. Enter a street . To enter a street
regardless of the city, turn the control knob to
In all cities and press the contro l knob . Se lect
and confirm additional deta ils about the desti ­
nation such as
House number or Intersection .
Start route guidance .
Assistance when entering an address: when en­
ter ing an address, locations that have been en ­
tered in the past are provided as suggestions in
the input field . By pressing the
List control but­
ton , you can accept the suggested location as a
destination. Additional cities that match your en­
try are listed below. The number of locations
found is also listed @¢
fig. 180.
When the desired city is shown in the speller in­
put field or the list below, you can press and hold
the control knob to switch to the city list.
Destination on the map
You can se lect a new dest inat ion from the map
by moving the crosshairs horizontally, vert ically
or diagonally using the MMI touch
9 page 136
¢ page 166.
Coordinates
Display of the geocoord inates where the cross ­
hairs are located (latitude and longitude).
Storing in the directory
Individual destinations can be stored direct ly in
the directory after they are entered. Two naviga­
tion destinations,
Private /Business , can be as­
signed to each contact.
166
Setting a destination from the map
App lies to : vehicles wit h navigat ion system
A location on the mop con be used as a destina­
tion or be entered in the directory .
Fig. 181 Select in g a des tinatio n on the map
Fig. 182 Sett ing a ma p locatio n as the destinat ion
- Opening the map : press the I NAVI button (sev­
eral times if necessary) .
-Adjusting the scale (to move the crosshairs
more quickly) :
turn the control knob to the
left/right.
- Switching the side menu on : press the control
knob .
-Sliding the crosshairs: slide the crosshairs hori­
zontally, vertically or diagonally to the desired
destination using the MMI touch ¢
page 136 .
-Selecting a destination: press the control
knob . Select and confirm the symbol ©
¢
fig. 181 in the side menu . Select and confirm
Start route guidance.
Additional information in the crosshairs loca­
tion :
if you select an item on the map with the
crosshairs, available information is disp layed
(such as the address or traffic information) .

C) C0 ....
"' " "' .... 0 0 :r @ Tips
-If a destination is not present in the naviga­
tion data, you can move the crossha irs to
the location of the desired city and set the
geocoordinates as a destination or add a
contact to the directory.
- If you stop moving the crosshairs for a mo­
ment, additional informat ion about the area
highlighted by the cross hairs will be dis­
played (such as the city or street name, if
available).
Enter point of interest
App lies to: ve hicles with navigation system
.,. Se lect : I NAVI button> Route guidan ce con trol
button >
Points of int ere st .
- Changing th e search area :
select Se arch area .
Select and confirm a search a rea in the list.
- Se arch ing for a po int of interest name in the
s elected search are a:
select Find entry . Enter
the name of the point of inte res t.
- Sear ching fo r a point of interest in a specifi c
categor y:
select and confi rm a catego ry, such
as
Airport .
The follow ing search catego ries are avai lable :
Top catego ries : this function helps you find pop­
ular locat ions such as the nearest parking lot.
The points of interest are sorted in ascending or­
de r according to the distance from the vehicle .
Searching for an entry in the cur rent country :
the name of the country is entered in the speller.
The point of interest does not depend on the ve ­
h icle posit ion and the destination . T his func tion
i s useful fo r search ing for po ints of inte rest that
you know about in a new co untr y.
Immediate vicin ity : points of inte rest ca n be se­
l ected from d ifferent categor ies. The po ints of in­
terest are lis ted sta rting from the immediate vi­
cin ity of the veh icle up to a r adius of approxi ­
mately 125 miles ( 200 km).
Vicinity of destination /stopover : the points of
i nte res ted ca n be selec ted from vario us ca tego­
ries, fo r example you can sea rch for a hote l at the
desti nation.
Na vigat ion
Along the route :
points of interest along the
route can only be se lected during active route
guidance . The point of inte rest is located direct ly
along the calculated route or in the vicinity of it.
In new city: the name of the city is entered in the
speller. Points of interest can be selected from
various categories. This function is useful for
searching for points of interest in a city inde­
pendent from the destination.
Nationwide : you can either search for the point
of interest by name or select it from various cate ­
gories. The point of interest is independent from
the vehicle position and destinat ion. For exam­
ple, you can navigate to an airport i n the current
country usi ng this function .
@ Tips
-The po ints of interest in Top categories and
Immediate vi cinity are displayed according
t o stra ight-line distance (o pen arrow) from
your c urrent locat ion. The actua l distance
from your cur rent locatio n to the po int of
interest is upda ted a utomat ically (solid ar­
row) .
- T here may be entr ies i n the list tha t cannot
be displaye d comp letely due to t heir length.
If you select these entries with the contro l
knob, a pop -up w indow containing detailed
information about the selected list e ntry
w ill open.
Online destinations
Applies to : vehicles wi th navigat io n syste m and A udi connect
You can search for points of interest on the In­
ternet.
F ig . 1 83 Add it ional information about on line destinat ions Iii'
167

Navigation
Requirement: the requirements for Audi connect
services must be met
¢page 157.
.,. Select : I NAVI button> Route guidance control
button >
Online destinations .
- Search at location or vicinity of destination/
stopover
1>: select and confirm Search in imme­
diate vicinity or Search at dest./stopover.
En­
ter a sea rch term, such as restaurant, and con­
firm the input with
OK . Select and confirm a
point of interest >
Start route guidance .
- Search in new cityl}:
select and confirm In new
city
> Find city. Enter the name of the city and
confirm the input with
OK . Enter a search term,
such as restaurant, and confirm the input with
OK . Select and confirm a point of interest>
Start route guidance .
- Finding destinations from myAudi account
2>:
select and confirm Find destinations from
myAudi account .
Enter the myAudi PIN for
your myAud i account, if necessary. The contacts
stored in the myAudi account are displayed.
You only need to enter the
myAudi PIN one
time . You will receive the
myAudi PIN in your
myAudi account once you have assigned a vehi­
cle to the account. Select and confirm a con­
tact. Se lect and conf irm a private or business
navigation destination >
Start route guidance .
You can display additional information about on­
line destinations in the
Destination details menu
¢fig . 183.
@ Tips
- F or additional information on the myAudi
account, visit
www.audi.com/myAudi.
- Refer to the notes in the chapter About
Audi connect
r:!>page 162.
1> Provider at time of prin ting.
2> Requirement : you must have a my Audi accou nt set up at
my.a udiusa.com. You must have a vehicle stored in your
myA udi account and you must have a destinat ion stored .
168
Setting a favorite/home address as the
destination
App lies to : vehicles wi th naviga tion sys te m
Favorites make it easier to enter a destination
that you use often.
Requirement: a favorite o r home address must
be stored ¢
page 172.
.,. Select: !NAV ! button > Route guidance control
button >
Favorites .
"' Select and confirm a favorite or the home ad­
dress. Start route guidance.
You can store up to ten ind iv idual destinat ions
and your
Home address as favorites ¢ page 172.
(j) Tips
-You can disp lay, find, ed it and delete your
stored favorites and home address on the
map
¢page 172.
-Favor ites are d isp layed on the map at a
scale up to 1.5 miles (2.5 km).
Loading the last destination
App lies to: vehicles wit h navigat ion syste m
Your previous destinations are stored automati­
cally and can be loaded directly as destinations.
.,. Select: !NAV ! button > Route guidance contro l
button
> Last destinations .
"'Select and confirm a previous dest ination from
the list. Start route guidance .
(D Tips
The list of last destinations can be deleted
¢page 174.

Navigation
Starting/canceling route
guidance
App lies to: ve hicles w ith navigat ion system
You can a lso cancel route guidance by enter ing a
new dest ination
c> page 165 .
-Start ing route guidance when entering a new
destination :
select the I NAVI button > Route
guidance
control button > Enter a destination
> Start route guidan ce .
- Resta rti ng/canceling last route guidance :
se­
lect the
I NAVI button> Route guidance control
button >
Start/Cance l.
The follow ing additional funct ions are ava ilable
when enter ing a new destination:
Alternative route s: three route suggest ions are
calculated for the destination that is cu rrent ly
entered. The side menu shows information about
the alternative routes, such as distance to the
destination and the ca lculated arrival t ime.
Alternative ro utes can only be calc ulated for indi­
vidual destinations .
Set point of intere st in cit y: allows yo u to search
for attractions and public p laces around the
specified location, such as hospita ls, movie thea­
ters, recreation areas, etc. The points of interest
can be selected d irectly as a destinat ion.
Set district : the navigation system calculates the
route to the center of the city or district that is
entered.
Display destination on map : the destinat io n en­
tered is disp layed on the map.
1l Only app lies to vehicles w itho ut camera -based speed limit
dis play .
170
Operating the map
Appl ies to: ve hicles with navigation system
Fig. 185 Online map wit h cross hairs sw itc hed off
F ig . 18 6 Standard map wit h the c ross hair s sw itched o n
-Ope ning the map : press the INAVI button (sev­
eral times if necessary) .
-Switching the crosshairs on : press the control
knob in the map v iew.
- Switching the cro sshair s off: press the I BACKI
button .
When the crosshairs are switched off:
(D Dir ec tion: the map is disp layed e ithe r with an
orientation to t he
North or to the Driving di­
re ction
<=> page 17 3 .
@ Scale: turn the control knob to the left or
right to decrease or inc rease the scale .
@ Dista nce to the des tination o r stopover
@ Calc ulated arriva l time at the destination or
stopover
® Speed display1 )
® Altitude disp lay
0 Vehicle location

C) C0 ....
"' " "' .... 0 0 :r @ Display of selected map information
® Display of an upcoming maneuver
When the crosshair s are switched on:
@ Information regarding the location of the
crosshairs: If yo u select a city on the map us­
ing the crosshairs, any information available
is displayed, such as address, phone number
or traffic information.
@ Map content, such as traff ic information, fa­
vorites or points of interest
@ Display of the geocoordinates where the
crosshairs are located (latitude and longi­
tude)
@ Moving along the route : This function can be
used while route guidance is active. Turn the
control knob to the left or right to move the
map along the current route .
@ Destination details menu: Display of availa ­
ble details about the location of the cross­
hairs, such as address. The location of the
crossha irs can be used as a stopover, stored
in the directory or called
¢page 165.
@ Repeat the last navigation message
If you select the map orientation(!) and press
the control knob when the side menu is switched
on and the
20 map view is selected ~ page 173,
the display switches from Dir. of travel to North
and vice versa. This setting is saved.
Online map view
Appl ies to: ve hicles with naviga tion sys tem and Audi co nnect
You can display the map with satellite images
using the online map view .
Fig. 187 Online map v iew
Navigation
Fig. 188 Map view w ith on line Street V iew
Requirement: the requirements for Audi connect
services must be met
~page 157.
., Select the I NAVI button> Settings control but­
ton >
Map view.
., Select and confirm the provider for the on line
map view .
The online map view is based on data packets re­
ceived from the Internet in the form of satellite
images, which are then combined with the road­
ways from the
Standard map view. The re are two
gigabytes of memory space on the MMI hard
drive that can be used to temporari ly store the
map or navigation data that was received. This is
roughly the amount required for the map/naviga­
tion data from a 2,500 miles (4,000 km) route.
As long as the satellite images loaded for route
guidance are stored on the hard drive, you can
use them without having an active data connec­
tion.
Online Street View*
You can explore many places in the world
through the eyes of a pedestrian using on line
Street View . Online Street View is available when
the symbol (!)¢
fig. 187 is displayed in the side
menu.
To activate the Online Street View, turn the con­
trol knob to a scale of less than 30 m.
The following functions are available:
- Exploring an area step-by-step : tap the MMI
touch control pad when the symbol is disp layed
@ ¢fig.188. ...
171