320
Surround View Camera*Checking for Obstacles at the Rear of the Vehicle
Other Features
Checking for Obstacles at the Rear of the Vehicle
Display the rear view screen to check for any obstacles at the rear of the vehicle when
backing up the vehicle into a garage or the like.
Switch between the rear view and ground view and rear view and mirror view
accordingly.
■Description and operation of the screens
Change the gear position to .
Display the rear ground view screen.
1 Checking for Obstacles at the Rear of the Vehicle
Each guide line display can be turned ON/OFF.
The four cameras provide the ground view on
the screen even when the door mirrors are
folded.
Note that the view area and blind spots change
when the door mirrors are folded.
Display on the screen when
the mirrors are folded
Do not drive the vehicle with the
door mirrors folded.
The view displayed on the screen when
the door mirrors are folded is for
confirming the safety around the vehicle
during parking.
R
Rear view
The view image
from the rear camera.
View area of the
screen and distances
the reference lines
indicate.
Distance the projection lines
indicate. Rear and Ground View screen
Turn the steering
wheel more than
90 degrees
Press the CAMERA button to
change the screen to the rear
wide view and the rear
normal view screen. Ground view
An overhead view image of
the vehicle synthesized from
the images from the four
cameras.
When the steering wheel is
turned, the projection lines
that show the vehicle's
projected trajectory and tire
angles are displayed.
Blind spots appear in black.
Blind spots are to appear
black. The projection lines
are displayed 40cm outside
of the vehicle body.
1 m
3 m2 m
20 cm
Tailgate
3 m
321
Surround View Camera*Checking the Right and Left Sides of the Vehicle at Intersections with Poor Visibility
Other Features
Checking the Right and Left Sides of the Vehicle at
Intersections with Poor Visibility
Display the front blind view screen when conforming the right and left sides of the
vehicle at intersections with poor visibility.
■ Description and Operation of the Screens
To switch the screens, press the CAMERA button when the vehicle speed is below 12km/h.
Display the front blind view screen.
The view image from the
rear camera.
Tailgate Rear Normal View Rear Wide View
Press the CAMERA button to change the
screen to the rear ground view screen.
1 m 3 m
2 m1Checking for Obstacles at the Rear of the Vehicle
Each side view is not displayed when the door
mirrors are folded.
1 Checking the Right and Left Sides of the Vehicle at
Intersections with Poor Visibility
As the system uses a wide-angle view, the
displayed images on the screen will be largely
distorted and different fr om the actual distance.
The front blind view screen is switched in the
order shown in the figure on P.310.
Front blind view
The view image from the
front camera.
Front blind view screen
The view area of the screen is
180 degrees.
