2016 TOYOTA VENZA ignition

2302-3. Operating the lights and wipers
VENZA_OM_OM73030U_(U) ■ The rear window wiper and w asher can be operated when
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Vehicles without smart key system
The engine switch is in the “ON” position.
NOTICE■ When the rear window is dry
Do not use the wipers, as they may damage the rear window.Ty p e B
Off
Intermittent window
wiper operation
Normal window
wiper operation
Washer/wiper dual
operation
Washer/wiper dual
operation

2432-4. Using other driving systems
2
When driving
VENZA_OM_OM73030U_(U) Rear view monitor system 
 : If equippedThe rear view monitor system assists the driver by displaying guide
lines and an image of the view behind the vehicle while backing up,
for example while parking.
The screen illustrations used in this text are intended as examples,
and may differ from th e image that is actually displayed on the
screen.
Vehicles with smart key sys-
tem: The rear view image is
displayed when the shift lever
is in “R” and the “ENGINE
START STOP” switch is in
IGNITION ON mode.
Vehicles without smart key
system: The rear view image
is displayed when the shift
lever is in “R” and the engine
switch is in the “ON” position. If you move the lever out of “R”,
the rear view monitor system will
be deactivated.

3143-1. Using the air cond itioning system and defogger
VENZA_OM_OM73030U_(U) ■ Using the automatic mode
Fan speed is adjusted automatically in accordance with the temperature set-
ting and ambient conditions. As a result, the following may occur.
● Immediately after is pressed, the fan may stop for a while
until warm or cool air is ready to flow.
● Cool air may flow to the area around the upper body when the heater is
on.
■ Using the system in recirculated air mode
The windows will fog up more easily if the recirculated air mode is used for
an extended period.
■ Switching between outside air and recirculated air modes
Recirculated air mode or outside air mode may be automatically switched in
accordance with the temperature setting and the inside temperature.
■ When the outside temperature exceed s 75°F (24°C) an d the air condi-
tioning system is on
● In order to reduce the air conditioning power consumption, the air condi-
tioning system may switch to recirculated air mode automatically. This
may help to improve fuel consumption.
● Vehicles with smart key system:
Recirculated air mode is selected as a default mode when the “ENGINE
START STOP” switch is turned to IGNITION ON mode.
Vehicles without smart key system:
Recirculated air mode is selected as a default mode when the engine
switch is turned to the “ON” position.
● It is possible to switch to outside air mode at any time by pressing .
■ Window defogger feature
Recirculated air mode may automatically switch to outside air mode in situa-
tions where the windows need to be defogged.

3163-1. Using the air conditioning system and defogger
VENZA_OM_OM73030U_(U)Rear window defogger
■ The rear window defogger can be operated when
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Vehicles without smart key system
The engine switch is in the “ON” position.
■ Outside rear view mirror defogg ers and windshield wiper de-icer
Turning the rear window defogger on will turn the outside rear view mirror
defoggers and the windshield wiper de-icer on.
The outside rear view mirror is used to remove raindrops, dew and frost from
the outside rear view mirrors.
The windshield wiper de-icer is used to prevent ice from building up on the
windshield and wiper blades.Clear the rear window using the defogger.
On/off The defogger will automatically
turn off after 15 or 60 minutes.
This operation time changes
according to the ambient tem-
perature and vehicle speed.
Pressing the switch again also
turns the defogger off.

3713-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Auto connection
To turn auto connection mode on, set “Bluetooth
* Power” to on.
(  P. 375)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth ®
phone in a place where a
connection can be established. When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby
cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth
* Power” is turned off,
you must connect the Bluetooth ®
device manually.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth ®
device” from
. (  P. 370)
Connecting a Bluetooth ®
audio player
Registering an additional device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 6 8
Selecting a registered device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 7 0STEP 1
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2

3723-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Reconnecting a Bluetooth ®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position (vehicles without a smart key system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart key system),
the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.

4133-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Symptom Likely cause Solution Page
Cellular
phone This
system
A Bluetooth ®

connection can-
not be made. Another
Bluetooth ®

device is
already con-
nected. Manually con-
nect the cellu-
lar phone you
wish to use to
this system.  P. 371
Bluetooth ®

function is not
enabled on the
cellular phone. Enable the
Bluetooth ®

function on the
cellular phone.
* 2

Automatic
Bluetooth ®
con-
nection on this
system is set to
off. Set automatic
Bluetooth ®
con-
nection on this
system to on
when the
engine switch is
turned to the
“ACC” or “ON”
position (vehi-
cles without a
smart key sys-
tem) or ACCES-
SORY or
IGNITION ON
mode (vehicles
with a smart key
system).  P. 371

4173-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features In other situations Symptom Likely cause Solution Page
Cellular
phone This
system
The Bluetooth ®

connection sta-
tus is displayed
at the top of the
screen each
time the engine
switch is turned
to the “ACC” or
“ON” position
(vehicles with-
out a smart key
system) or
ACCESSORY
or IGNITION
ON mode (vehi-
cles with a
smart key sys-
tem). Connection
confirmation
display on this
system is set to
on. To turn off the
display, set con-
nection confir-
mation display
on this system
to off.  P. 375