2016 TOYOTA iM Owners Manual (in English)

973-3. Adjusting the seats
3
Operation of each component
Scion iM_U (12J49U)
WARNING
Observe the following precautions. Failure to do so may result in death or
serious injury.
nWhen folding the rear seatbacks down
lDo not fold the seatbacks down while driving.
l Stop the vehicle on level ground, set the parking brake and shift the shift
lever to P (continuously variable transmission) or N (manual transmission).
l Do not allow anyone to sit on a folded seatback or in the luggage compart-
ment while driving.
l Do not allow children to enter the luggage compartment.
l Do not allow anyone to sit on the rear center seat if the rear right seat is
folded down, as the seat belt buckle for the rear center seat belt is th\
en
concealed under the folded seat and cannot be used.
l Be careful not to get your hand caught when folding the rear seatbacks.
l Adjust the position of the front seats before folding down the rear seat-
backs so that the front seats do not interfere with the rear seatbacks when
folding down the rear seatbacks.
n After returning the rear seatback to the upright position
lMake sure that the seatback is securely
locked in position by lightly rocking it
back and forth.
If the seatback is not securely locked,
the red marking will be visible on the
seatback lock release knob. Make sure
that the red marking is not visible.
l Check that the seat belts are not twisted
or caught in the seatback.
If the seat belt gets caught between the
seatback’s securing hook and latch, it
may damage the seat belt.

983-3. Adjusting the seats
Scion iM_U (12J49U)
Up
Pull the head restraints up.
Down
Push the head restraint down while
pressing the lock release button.
Setting up the rear outside seat
head restraints
Fold back the head restraint and
then push it down to the lock posi-
tion.
Folding the rear outside seat
head restraints
Pull the head restraint up while
pressing only the right-side lock
release button and then fold it for-
ward.
Head restraints
Head restraints are provided for all seats.
Front seats and rear center seat
Lock release button
1
2
Rear outside seats
Lock release
button
1
2

993-3. Adjusting the seats
3
Operation of each component
Scion iM_U (12J49U)
nRemoving the head restraints
Front seats and rear center seat
Rear outside seats
n Installing the head restraints
Front seats
Rear center seat
Pull the head restraint up while pressing
the lock release button.
Pull the head restraint up while pressing
the lock release buttons.
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
Lock release button
Lock release buttons
Lock release button
Lock release button

1003-3. Adjusting the seats
Scion iM_U (12J49U)
Rear outside seats
n Adjusting the height of the head restraints
n Adjusting the rear center seat head restraint
Always raise the head restraint one level from the stowed position when
using. Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
WARNING
nHead restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
lUse the head restraints designed for each respective seat.
l Adjust the head restraints to the correct position at all times.
l After adjusting the head restraints, push down on them and make sure
they are locked in position.
l Do not drive with the head restraints removed.

101
3
Operation of each component
Scion iM_U (12J49U)
3-4. Adjusting the steering wheel and mirrors
Hold the steering wheel and
push the lever down.
Adjust to the ideal position by
moving the steering wheel hori-
zontally and vertically.
After adjustment, pull the lever up
to secure the steering wheel.
To sound the horn, press on or
close to the mark.
Steering wheel
Adjustment procedure
1
2
Horn

1023-4. Adjusting the steering wheel and mirrors
Scion iM_U (12J49U)
WARNING
nCaution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.
n After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an
accident, and resulting in death or serious injury. Also, the horn may not
sound if the steering wheel is not securely locked.

1033-4. Adjusting the steering wheel and mirrors
3
Operation of each component
Scion iM_U (12J49U)
The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.
Reflected light from the headlights of vehicles behind can be reduced
by operating the lever.
Normal position
Anti-glare position
Inside rear view mirror
The rear view mirror’s position can be adjusted to enable suffi-
cient confirmation of the rear view.
Adjusting the height of rear view mirror
Anti-glare function
1
2
WARNING
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident,
resulting in death or serious injury.

1043-4. Adjusting the steering wheel and mirrors
Scion iM_U (12J49U)
To select a mirror to adjust,
press the switch.Left
Right
To adjust the mirror, press the
switch. Up
Right
Down
Left
Press the switch to fold the mir-
rors.
Press it again to extend them to
the original position.
Outside rear view mirrors
Adjustment procedure
1
1
2
2
1
2
3
4
Folding the mirrors