Other 329
Reference
•DivX
•DivX
“, DivX Certified “ and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
•Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
•ABOUT DivX VIDEO:
DivX
“ is a digital video format created by DivX, LLC, a subsidiary of
Rovi Corporation. This is an official DivX Certified “ device that plays
DivX video. Visit divx.com for more information and software tools
to convert your files into DivX videos.
•ABOUT DivX VIDEO-ON-DEMAND:
This DivX Certified
“ device must be registered in order to play
purchased DivX Video-on-Demand ( VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to
complete your registration.
DivX Certified
“ to play DivX “ video, including premium content.
•Bluetooth
The Bluetooth
“ word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by FUJITSU
TEN LIMITED is under license. Other trademarks and trade names are
those of their respective owners.
About certification
■For vehicles sold in the U.S.A.
Bluetooth
FCC ID: BABFT0021A
CAUTION: Radio Frequency Radiation Exposure
•This equipment complies with FCC radiation exposure limits set forth
for uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65. This equipment has
very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable
that it should be installed and operated with at least 20cm and more
between the radiator and person's body (excluding extremities:
hands, wrists, feet and ankles).
•Co-location: This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Bluetooth and FM radio frequency
•This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC WARNING
•Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
330 Other
Reference
■For vehicles sold in Canada
Bluetooth
IC: 2024B-FT0021A
•English:
CAUTION: Radio Frequency Radiation Exposure
•This equipment complies with IC radiation exposure limits set forth for
uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed and operated with at
least 20cm and more between the radiator and person's body (excluding
extremities: hands, wrists, feet and ankles).
•This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
•Français:
AT T E N T I O N: l'exposition aux rayonnements radiofréquence
•Cet équipement se conforme aux limites d’exposition aux radiations
établies par Industrie Canada pour un environnement non contrôlé ainsi
qu’aux directives d’exposition aux fréquences radioélectriques (RF) émises
par Industrie Canada dans la norme CNR-102. Cet équipement émet un
niveau d’énergie RF faible à un point tel qu’il se conforme sans devoir
effectuer d’évaluation d’exposition maximum admissible (MPE). Lorsque
l’équipement est utilisé, il est toutefois souhaitable de laisser au moins 20
cm entre l’antenne et le corps (à l’exception des extrémités : mains,
poignets, pieds et chevilles).•Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
