Radio
Operation
Introduction
This chapter contains information on the following subjects: Display
9
Select the frequency range
9
Save radio stations
9
Select radio stations and search
10
The unit allows analogue radio reception of FM and AM frequencies.
CAUTION
■
Car parks, tunnels, tall buildings or mountains can disrupt the radio signal
even causing it to fail completely.■
For vehicles with window antennas do not stick foil or metal coated stickers
to the window as this can lead to interference.
Display
Fig. 4
Radio - Display
Read and observe on page 9 first.
Description of the display » Fig. 4
The selected frequency range
The selected radio station (frequency or identifier)
Status bar
ABCIcons in the status bar CSymbolMeaningManual search of the frequency rangeAutomatic search of the frequency range - Number one position (station buttons) under which the
radio station is storedSound offA traffic information station is availableNo traffic information station is available
Select the frequency range
Read and observe
on page 9 first.
›
Press the button repeatedly.
Each frequency range has two storage groups each - FM1 and FM2 or AM1 and
AM2 .
Note
If a radio station should broadcast RDS data information in the FM frequency
range, then the name will be shown in the device display instead of the fre-
quency of the broadcasting station.
Save radio stations
Read and observe
on page 9 first.
Storing manually
›
Hold one of the pre-set buttons - .
The station is stored in the selected position.
Storage is confirmed by an acoustic signal and by displaying the number of the
station button in the status line of the display.
Automatic storage
›
Press the button.
In the device display the following text appears
AutoStore ...
and in the current
storage group (e.g. FM1), six radio stations are stored with the strongest signal.
9Radio
Supported audio sources and file formats
Supported audio sourcesSourceTypeSpecificationFATSD cardStandard sizeSD, SDHC
FAT16; VFAT; FAT32USB device
USB stick;
HDD (without
special software)USB 1.x; 2.x and
3.x or higher with
support of USB
2.xPortable player (e.g., iPod ®
, iPad ®
, iPhone ®
, MTP player
(MSC))
Supported file formats
File FormatMPEG-1; 2 and 2.5 (Layer-3)Windows MediaAudio 9File suffixmp3wmaMax bit rate320 kbit / s384 kbit / sMaximum sampling rate48 kHz96 kHzPlaylistsm3u; pls; wpl; m3u8; asx
The medium of the GPT standard (GUID Partition Table) in the area of divided
audio sources and files, which are protected with the DRM procedure, and are
not supported by the device.
15Media
