2016 Peugeot Traveller inflation pressure

4
Traveller-VP_en_Chap00b_vue-ensemble_ed01-2016
exterior
Filler cap, fuel tank 261-262
Misfuel prevention 26 2-263
Running out of Diesel fuel, priming


322
un

der-inflation detection
2
58-260
Tyres, pressures

2
59 -260, 327
e

SC system
1
59 -161
ABS,
e
B
FD
1
59 -160
DSC, ASR

1
61
gr

ip control
16
1, 162-163
Snow chains

2
64
Front doors

6
5
AdBlue
® tank 2 78-281
Tool box 2 82-284
Automatic illumination of headlamps
1
47
Automatic headlamp dipping
151-152
Direction indicators
1

46
Adjusting the headlamp beam height
1

53
Changing front bulbs
2

98-304
Headlamp wash
1

56
Panoramic sunroof
1

20
Accessories


267-268
op

ening the bonnet

2

71 Key

45
Key, remote control
4
5 -50
Changing the battery, reinitialisation
5
1
Keyless e
n
try
and Starting
5
2-62
Changing the cell battery, reinitialisation
6
2
Starting - switching off the engine 198 -20 0
-
k
ey, remote control
-

K

eyless
e
n

try and Starting
remote control
Locking - unlocking from inside

6
4
Alarm


83-85
Speed limit
recognition
221-224
Collision Risk Alert
2
39 -242
Active Safety Brake

2

42-244
Changing a wiper blade

269
Automatic wiping
1

55-156
Front demisting, defrosting
1

31
Front foglamps

1

45, 299, 304
Daytime running lamps

1

47, 300
Cornering lighting
1

50
Parking sensors
2

52-253
Towing


320-321
over view

5
Traveller-VP_en_Chap00b_vue-ensemble_ed01-2016
Number plate lamp 306, 309
- s ide-hinged doors
-


tailgate
Reversing camera
2

54
Rear vision

2
55 -257
Changing rear
bulbs
2
98, 305 -310
Rear lamps (side-hinged doors)
2
98, 305 -307
Rear lamps (tailgate)
2
98, 308 -310
3
rd brake lamp 3 06, 309
-
s ide-hinged doors
-


tailgate
Warning triangle
2

82
Temporary puncture repair kit
2

85-290
Spare wheel, jack, changing a wheel
2

91-297
Inflation, pressures
2

97, 327
el
ectric door
mir ror s

141-142
Demisting-defrosting the mirrors
1
32
Blind Spot Monitoring
System
2
49-251
Fatigue detection system
2
47-248
Lane Departure Warning System

245 -246
Direction indicator side repeaters 3 00
Manual sliding side d o o r (s)


6 6 - 67
el

ectric sliding side
d o o r (s)
6

8 -71
Hands-free sliding side d o o r (s)


75 -78
Manual child lock

1
90
el

ectric child lock
1
90
Rear window child lock

1
91
Accessories


267-268
Roof bars / Roof rack
2
68
Towing

320-321
Trailer towbar

1
94, 265
Rear parking sensors
2

52-253
Side-hinged doors
7

9-80
Tailgate
8
1
Tailgate screen
8
2
Demisting-defrosting the rear screen
1
33
exterior (continued)
.
over view

20
Warning / indicator lampStateCause Action / Observations
Foot on the
brake pedal fixed.
The brake pedal must be pressed. With an automatic or electronic gearbox, press the
brake pedal, engine running, before releasing the
parking brake, to release the selector lever and come
out of position P or N.
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
Foot on the
clutch fixed.
In the ST
oP m

ode of Stop & Start,
the change to START mode is denied
because the clutch pedal is not fully
down. If your vehicle has a manual gearbox, you must
declutch fully to allow the change to engine START
mode.
Under-inflation
fixed, accompanied by
an audible signal and
a message. The pressure in one or more tyres is
too low.
Check the tyre pressures as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after the adjustment
of one or more tyre pressures and after changing one
or more wheels.
For more information on Under-inflation detection
,
refer to the corresponding section.
+ flashing then fixed,
accompanied by the
Service warning lamp.The system has a fault: the tyre
pressures are no longer monitored.
Check the tyre pressures as soon as possible.
Have the system checked by a P
e

ugeo
T d
ealer or a
qualified workshop.
Instruments

258
Traveller-VP_en_Chap06_conduite_ed01-2016
Under-inflation detection
The system monitors the pressures in the four
tyres, once the vehicle is moving.
It compares the information given by the four
wheel speed sensors with reference values,
which must be reinitialised ever y time the
tyre pressures are adjusted or a wheel
changed.
The system triggers an alert as soon as it
detects a drop in the inflation pressure of one
or more tyres. The under-inflation detection system
does not replace the need for vigilance
on the part of the driver.
This system does not avoid the need to
check the tyre pressures (including the
spare wheel) every month as well as
before a long journey.
Driving with under-inflated tyres impairs
road holding, extends braking distances
and causes premature tyre wear,
particularly under arduous conditions
(high loading, high speed, long journey).
System which automatically checks the pressures of the tyres while driving.
The inflation pressures defined for
your vehicle can be found on the tyre
pressure label.
For more information on the
Identification markings, refer to the
corresponding section.
Tyre pressures should be checked
when the tyres are "cold" (vehicle
stopped for 1 hour or after a journey of
less than 6 miles (10 km) at moderate
speeds).
ot

her wise (when hot), add 0.3 bar to
the pressures shown on the label.
Driving with under-inflated tyres
increases fuel consumption.
Snow chains
The system does not have to be
reinitialised after fitting or removing
snow chains.
Spare wheel
The steel spare wheel does not have an
under-inflation detection sensor.
Driving

259
Traveller-VP_en_Chap06_conduite_ed01-2016
Under-inflation alertReinitialisation
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the
tyre pressure label.
The under-inflation alert can only
be relied on if the reinitialisation of
the system has been done with the
pressures in the four tyres correctly
adjusted.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
This is given by fixed illumination of
this warning lamp, accompanied by
an audible signal and, depending on
equipment, the display of a message.
It is necessary to reinitialise the system every
time one or more tyre pressures are adjusted,
and after changing one or more wheels.
F
R
educe speed immediately, avoid
excessive steering movements and sudden
braking.
F

S

top the vehicle as soon as it is safe to do so. F

I

n the event of a puncture, use the
temporary puncture repair kit or the spare
wheel (depending on equipment),
or
F

i

f you have a compressor, such as the one
in the temporary puncture repair kit, check
the pressures of the four tyres when cold,
or
F

i

f it is not possible to make this check
immediately, drive carefully at reduced
speed.
The loss of pressure detected does not
always cause visible bulging of the tyre.
Do not satisfy yourself with just a visual
check. The alert is maintained until the system
is reinitialised.
Initialisation of the system is done with the
ignition on and the vehicle stationary.The new pressure settings registered
are considered to be reference values
by the system.
6
Driving

260
Traveller-VP_en_Chap06_conduite_ed01-2016
In the Driving menu, select " Under-inflation
initialisation ".
With the audio system
In the "Personalisation-configuration " menu,
select " Under-inflation initialisation ".
Operating fault
The flashing and then fixed illumination of the
under-inflation warning lamp accompanied
by illumination of the Service warning lamp
indicates a fault with the system.
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a P
e

ugeo
T
d

ealer or a qualified workshop. Before doing anything to the system,
the pressures of the four tyres must be
checked and the system reinitialised.
With the touch screen
Press on " Ye s" to Confirm the command,
initialisation is confirmed by an audible signal
and a message.
Driving

285
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
This kit is stowed in the tool box. This kit consists of a compressor and a sealant
cartridge.
It allows the temporary repair of a tyre.
You are then able to go to the nearest garage.
It is designed to repair most punctures which
could affect the tyre, located on the tyre tread
or shoulder.
Its compressor can be used to check and
adjust the pressure of the tyre.
Temporary puncture repair kit
Access to the kit
1. 12 V compressor. T o temporarily repair a tyre using an
integral sealant cartridge and adjust the
tyre pressure.
2.
T

owing eye. The tyre inflation pressures are given on this
label.
The vehicle's electric system allows the
connection of a compressor for long
enough to inflate a tyre after a puncture
repair or for inflating a small inflatable
accessory.
For more information on To w i n g
, refer
to the corresponding section.
List of tools
These tools are specific to your vehicle and can
vary according to equipment. Do not use them
for other purposes.
For more information on the Tool box ,
refer to the corresponding section.
8
In the event of a breakdown

288
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a P
e

ugeo
T d
ealer or a qualified
workshop for assistance.
F

S

witch on the compressor by moving
the switch B to position "I" until the tyre
pressure reaches 2.0 bars.
T

he sealant is injected into the tyre under
pressure; do not disconnect the pipe from
the valve during this operation (risk of
splashing). F
R
emove the kit and screw the cap back on
the white pipe.
T
ake care to avoid staining your vehicle
with traces of fluid. Keep the kit to hand.
2. Inflation
F Turn the selector A to the "Air" position.
F
u
n

coil the black pipe H fully.
F

C

onnect the black pipe to the valve of the
wheel.
F

D

rive immediately for approximately
three miles (five kilometres), at reduced
speed (between 15 and 35 mph (20 and
60

km/h)), to plug the puncture.
F

S

top to check the repair and the tyre
pressure using the kit.
In the event of a breakdown