2016 Peugeot Boxer radio

234
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
Briefly press one of the buttons to
carry out an automatic search down/
up for radio stations. Press the "
rAd
I
o" b
utton to select
the FM or AM waveband.
tu

rn the dial to carry out a manual
search down/up for radio stations.
Press the dial to display the list of
stations received locally.
tu

rn the dial to choose a radio station
then press to select it. Press the "
rAd

I
o" b
utton to select
the FM or AM waveband.
Press the ME
nu b
utton.
Press the "
A-B-
c" b
utton to select
one of the three sets of preset
stations.
Select "re gional" then press to
switch RDS on or off.
Make a long press one of the buttons
to preset the current radio station.
th

e name of the station is displayed
and an audible signal confirms the
preset.
Press " InF o" t o display information
on the current radio station.
Presetting a station
Selecting a station
the surroundings (hills, buildings,
tunnel, parking, under ground...) may
prevent reception, including RDS
alternative frequencies.
th

is phenomenon is normal in the
propagation of radio waves and does
not in any way imply a fault with the
audio system.RDS, if displayed, makes it possible
to continue listening to the same radio
station using the alternative frequencies
function. However, in certain conditions
it may not be possible to stay with the
same station as not all radio stations
cover the entire country. When reception
is poor the system switches to a regional
frequency.
Radio
rdS
Audio System

235
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
Select "Alternative frequencies
(AF)" then press to activate or
deactivate the frequency.
Press the "ME
nu" b

utton.
Select "
tr

affic information
(
t

A )" then press to switch traffic
announcements on or off.
When the "
re

gional" function is on,
the system can then search for a
stronger frequency at any time.th e tA (tr affic Announcement)
function gives priority to playing
t
A
a

lert messages. t
o b
e active, this
function requires good reception of
a radio station that broadcasts this
type of message. As soon as traffic
information is broadcast, the media
playing is interrupted automatically
to transmit the
t
A m
essage. Normal
play of the media is restored after
transmission of the message.
Alternative frequencies (AF)re ceiving tA messages
Audio System
AuDIO and teLeMAtICS
10

236
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
uSB playerAuxiliary socket (Au x)uSB port
Media
the system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
th

e playlists are updated every time the
ignition is switched off or connection of a
u
S
B
memory stick. However, the audio system
memorises these lists and if they are not
modified, the loading time will be shorter. Insert a u
S
B memory stick or connect a
peripheral device to the u
S
B port in the central
storage space, provided for transferring data
to the system, using a suitable cable (not
supplied). Located on the centre console, this port is used
only for powering and recharging the portable
device connected.
Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).
First adjust the volume on your portable device
(to a high level).
t
h
en adjust the volume of your
audio system.
Control is via the portable device.
th

e functions of the device connected to the
"A
uX

" socket are controlled directly from the
device itself: changing track / folder / playlist or
starting/ending/pausing play using the audio
system control panel or steering mounted
controls is therefore not possible.
Do not leave the cable of your portable device
connected to the A
uX s

ocket when not in use,
to avoid possible noises from the speakers.
Audio System

237
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
It is recommended that official Apple® uS
B cables are used to ensure correct
operation.
th

e system does not support
two

identical devices connected at
the same time (two memory sticks,
two Apple
® players) but it is possible
t
o connect one memory stick and one
Apple
® player at the same time.
th

e system supports u
S
B mass storage
devices, BlackBerry
® devices or Apple®
players via
uS
B ports.
th
e adaptor cable is not
supplied.
Other peripherals, not recognised on
connection, must be connected to the auxiliary
socket using a Jack cable (not supplied).
us

e only
u
S

B memory sticks formatted FA
t
32
(File Allocation
t
a

ble).
It is advisable to restrict file names to
20


characters, without using of special
characters (e.g.: "

"

?

; ù) to avoid any playing
and displaying problems.
Information and advice
the version of software in the audio
system may not be compatible with the
generation of your Apple
® p l aye r.
connecting Apple® players
Connect the Apple® player to the uS B port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
th
e classifications available are those
of the portable device connected
(artists / albums / genres / tracks /
playlists / audio books / podcasts).
th
e default classification used is by
artist. t
o m
odify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.
Audio System
AuDIO and teLeMAtICS
10

238
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
telephone
Pairing a Bluetooth®
telephone
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration).
Select "
co

nnect tel" to start the
pairing procedure, and search for the
name of the system in the telephone. When the pairing procedure has
finished successfully, a screen page
with "
co

nnection successful"
appears:
Confirm to display the menus.
th

e telephone menu gives access to
the following functions in particular:
"
cal

l log", "
c

ontacts" *, "Keypad ".
When pairing, a screen page is displayed
showing progress in the operation.
us

ing the telephone's keypad, enter the PIN
displayed in the screen of the system or
confirm in the telephone the PIN displayed. Press "
Phone".
If no telephone has yet been paired
in the system, a special page is
displayed in the screen. If the operation fails, we recommend
switching the function Bluetooth of
your telephone off and then on again.
* If your telephone is fully compatible.
receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen. Press this button to accept the
incoming call.
Or press this button to reject the call.
Ending a call
to reject a call, press this button at
the steering mounted controls.
Making a call
Select "cal l log" for access to the
recent calls made.
Select "
c

ontacts" to display your
contacts and use the dial to scroll
through the list.
to d

ial a number, use the system's
" Keypad ".
Audio System

239
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
Settings
System settingsAudio
Press the "MEnu" b utton. Press the "MEnu" b utton.
Select " System settings " then
press to display the list of settings for
activating or deactivating options:
-
"
re
set default value "
-
"20 min. delay for switching
off "
-
"Limit initial volume "
-
"Automatic " Select "
Audio" then press to display
the list of settings for activating or
deactivating options:
-
"
tr
e b l e"
-
"Mid-range "
-
"Bass "
-
"(Activate/
d eactivate)"
-
"Volume linked to vehicle
speed "
-
"Loudness "
the

audio settings are different and
independent for each audio source.
Audio System
AuDIO and teLeMAtICS
10

240
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
Voice commands
Steering mounted controls
Information - using the system
Instead of touching the screen, you can
use your voice to issue commands to
the system. Voice interaction can be quickly used
if these buttons are pressed during
a voice message from the system; It
allows a voice command to be issued
di r e c t l y.
For example, if the system is speaking
a voice help message and if you want
to know the command to give the
system, by pressing these buttons, the
voice message is interrupted and the
desired voice command can be spoken
directly (so avoiding the need to listed
to the complete voice help message).
When the system is waiting for a voice
command from the user, pressing these
buttons closes the voice session.
to e

nsure that your voice commands
are always recognised by the system,
we recommend that you follow the
advice below:
-

s
peak with a normal tone of voice,
-

b
efore speaking, always wait for
the "beep" (audible signal),
-

t
he system is able to recognise
the voice commands delivered,
independent off gender, tone and
inflexion of the voice of the person
speaking,
-

k
eep the noise level inside the
vehicle as low as possible,
-

b
efore speaking a voice command,
ask other passengers not to speak.
As the system recognizes voice
commands whatever is said, when
more than one person speaks
at the same time, it is possible
that the system will recognise
commands different or additional to
the one intended,
ev

ery time a button is pressed, a
"beep" (audible signal) is produced
and the screen displays a page of
suggestions asking the user to speak a
command.
-
f or best operation, it is
recommended that the windows
and opening roof (for versions/
markets where it is available) be
closed to avoid inter ference from
extraneous noises.
th

is button switches on the
"
te

lephone" voice recognition mode,
which makes it possible to start calls,
view the log of recent /received/made,
display contacts, etc.
th

is button switches on the "Radio/
Media" voice recognition mode,
which makes it possible to tune to a
specific radio station radio or specific
AM/FM radio frequency, play a track
or an album on a
u
S
B memory stick /
iPod/MP3 CD.
Audio System

241
boxer_en_Chap10b_Autoradio_Fiat-4_ed01-2015
Global voice commands
these commands can be made from any screen page after pressing the voice recognition or telephone button located on the steering wheel,
as long as there is no telephone call in progress.Level 1 Level 2Level 3
co

mment
Help Provides generic help to the user by suggesting
certain available commands.
ca

ncel Closes the current voice session.
rep

eat Repeats to the user the last voice message spoken.
Voice tutorial Provides the user with detailed description of how
to use the voice system.
Audio System
AuDIO and teLeMAtICS
10