2016 Peugeot 508 Hybrid gearbox

33
6
Driving
508HY-comp _en_Chap06_conduite_ed01-2016
Manual gear changing  When the vehicle has moved off, select position M to change to manual mode.  Operate the + or - steering mounted control paddles.
At very low speed, if reverse gear is requested, this will only be taken into account when the vehicle is immobilised. A warning lamp appears in the instrument panel screen. Only engage reverse gear R when the vehicle is immobilised with the brake pedal pressed.
On sharp acceleration in manual mode, the gearbox will not change up unless the driver acts on the gear lever or the steering mounted paddles. Never select neutral N while the vehicle is moving.
A disappears and the gears engaged M1...M6 appear successively in the instrument panel screen.
The gear change commands are only carried out if the engine speed permits. The internal combustion engine is still running. It is not necessary to release the accelerator during gear changes. When braking or slowing down, the gearbox changes down automatically to permit acceleration in the correct gear.
This occasional gear change mode enables you to overtake, for example, while still remaining in automated mode.  Operate the + or - steering mounted control paddle. The gearbox engages the gear requested if the engine speed permits. A is still displayed in the instrument panel.
Manual mode
After a few moments without any action on the controls, the gearbox resumes automatic control of the gears.

34
Driving
508HY-comp _en_Chap06_conduite_ed01-2016
To immobilise the vehicle without applying the parking brake, before switching off the ignition, place the gear selector in position A or R . If the battery is flat, it is essential to place a chock against one of the wheels to immobilise the vehicle.
Stopping the vehicle
Before switching off the HYbrid4 system, place the gear selector in position N. When switching off the HYbrid4 system, the electric parking brake is applied automatically. If the automatic function is deactivated, apply the parking brake manually to immobilise the vehicle.
Operating fault
Creep function
This function facilitates manoeuvring of the vehicle at low speed (when parking, in traffic jams, …). With the HYbrid4 hybrid system active, the vehicle stationary and the parking brake released:  press the brake pedal,  place the gear selector in position A , Ror M ,  gradually release the brake pedal. The vehicle moves off immediately and gradually reaches a speed of approximately 6 mph (10 km/h), with pressing the accelerator pedal.
Never leave children unsupervised in the vehicle with the HYbrid4 system active.
For your safety, this function will only be activated if you press the brake pedal when engaging forward drive or reverse. This function is deactivated if the driver's door is opened. To reactivate it, close the door and then press the brake or accelerator pedal.
Have it checked by a PEUGEOT dealer or a qualified workshop.
With the ignition on, the flashing of this warning lamp, accompanied by an audible signal and a message in the instrument panel screen, indicates a malfunction of the gearbox.
Before leaving the vehicle, check that the parking brake lamps are on (not flashing) in the instrument panel and in the control lever.

44
Technical data
508HY-comp _en_Chap09_caracteristiques-techniques_ed01-2016
* The maximum power corresponds to the value type approved on an engine test bed, under conditions defined by European legislation (directive 1999/99/EC).

Diesel engine and gearbox
Diesel engine2.0 litre HDi 163 hp
Gearbox E T G 6 e l e c t r o n i c ( 6 - s p e e d )
Cubic capacity (cc) 1 9 9 7
Bore x stroke (mm) 85 x 88
Max power: EU standard (kW) * 120
Max power engine speed (rpm) 3 850
Max torque: EU standard (Nm) 300
Max torque engine speed (rpm) 1 750
Fuel Diesel
Catalytic converter Ye s
Particle filter Ye s
Engine oil capacity in litres (with filter replacement) 5.0

45
9
Technical data
508HY-comp _en_Chap09_caracteristiques-techniques_ed01-2016
* The kerb weight is equal to the unladen weight + driver (75 kg). ** The weight of the braked trailer can be increased, within the GTW limit, if the GV W of the towing vehicle is reduced by an equal amount; warning, towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1000 metres; the towed load mentioned must be reduced by 10 % for each additional 1000 metres of altitude. The maximum authorised speed is reduced when towing (comply with the legislation in force in your country). High ambient temperatures may result in a reduction in the per formance of the vehicle to protect the engine; if the ambient temperature is above 37 °C, limit the towed load.
Weights and towed loads (in kg)
VersionDiesel HYbrid4
GearboxETG6 electronic ( 6 - s p e e d )
Model code: 8U...RHCM/P
- Unladen weight 1 770
- Kerb weight * 1 845
- Gross vehicle weight (GV W) 2 325
- Gross train weight (GTW) on a 12% gradient 3 125
- Braked trailer (within GTW limit) on a 10% or 12% gradient 800
- Braked trailer ** (with load transfer with the GTW limit) 1 100
- Unbraked trailer 750
- Recommended nose weight 75

51
.
Alphabetical index
508HY-comp_en_Chap14_index-alpha_ed01-2016
Accessory position .........................................16Advice on driving ............................................22Air conditioning .........................................21, 24
Battery, 12 V ................................................5, 39Battery, high voltage .......................5, 26 -28, 43
Cable, high voltage .........................................27Car wash .........................................................35Cooling, high voltage battery ..........................28
Demisting/defrosting .......................................24Dimensions .....................................................46Display screen, instrument panel ...........7, 9, 12Driving economically.......................................23
Filter, particle ..............................................5, 25Fittings, boot ...................................................30Flat bed (recovery) ..........................................38Four-wheel drive (4WD) ......................18, 22, 36Fuel consumption ..................................8, 11, 23
AE
B
C
D
F
Gearbox, electronic ...................5, 14, 22-24, 31Gear lever, electronic gearbox .......................31Ground clearance ...........................................46
Head-up display ..............................................15Heating ......................................................21, 24High voltage ..............................................26, 27Histogramme, fuel consumption .....................11
G
H
Ignition on........................................................16Ignition switch .................................................14Instrument panel ...............................................7
I
Key, electronic ...........................................14, 18Keyless Entry and Starting .................14, 16, 18Key not recognised .........................................18Key with remote control ..................................14Kit, temporary puncture repair ........................Kit, temporary puncture repair ........................Kit, temporary puncture repair37
K
Eco-driving .....................................................23ECO OFF (switch) ...........................................21Electric running (ZEV) ............10, 18, 21, 23, 24Emergency switching off .................................Emergency switching off .................................Emergency switching off17Energy flows ...............................................9, 10Energy recovery ....................................8, 10, 23Engine compartment ......................................29Engine, Diesel .....................5, 18, 21, 24, 35, 44Environment ....................................................23