
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-26
Features and controls
5
4.Insert
the
emer
gency
key
into
the
ignition
switch.5.Insert
the
F.A.S.T
.-key
into
the
emer
gency
key
.
6.Press
and
hold
the
brake
pedal
down
firmly with your right foot.7.Press
and
hold
the
clutch
pedal
all
the
way
down
(manual
transaxle).
8.On
vehicles
with
manual
transaxle,
place
the
gearshift
lever
in
the
“N”
(Neutral)
position. On
vehicles
with
CVT
, make
sure
the
selector
lever
is in
the
“P”
(PARK)
posi-
tion.
9.Turn
the
emer
gency
key
with
the
F.A.S.T
.-key
to
the
“ON”
position
and
make
certain
that
all
warning
lights
and
warning
displays
are
functioning
properly
before starting the engine.
10.
Turn
the
emer
gency
key
with
the
F.A.S.T.-key
to
the
“START”
pos
ition
without
pressing
the
accelerator
pedal.
Release
the
emer
gency
key
with
the
F.A.S.T
.-key when the engine starts.
11.Remove
the
F.A.S.T
.-key
from
the
emer
-
gency key
.
NOTE
For
models
equipped
with
a manual
trans
-
axle,
the
starter
will
not
operate
unless
the
clu
tch
pedal is fully
depre
ssed (Cl
utch
inter-
lock). This is a safety feature.
NOTE
On
vehicles
with
continuously
variable
trans
mission
(CV
T),
the
starter
will not
oper
-
ate
unless
the
selector
lever
is in
the
“P”
(PARK)
position
or
the
selector
lever
is in
the “N” (NE
UTRA
L) position
with
the brake
pedal depr
essed.
For s
afety
reas
ons, s
tart the eng
ine in t
he “P”
(PARK)
position
so
that
the
wheels
are
locked.NOTE
Minor
noi
ses may
be heard
on
engi
ne start-
up.
These will disappear
as the engi
ne warms
up.

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-27
5
After
several
attempts,
you
may
experience
that the engine still does not start.1.Make
sure
that
all
electric
devices,
such
as
lights,
air
conditioning
blower
and
rear
window defogger
, are turned of
f.
2.While
depressing
the
brake
pedal
on
vehi-
cles
equipped
with
continuously
variable
transmission
(CVT)
or the
clutch
pedal
on
the
vehicles
equipped
with
manual
trans-
axle,
press
the
accelerator
pedal
halfway
and
hold
it there,
then
crank
the
engine.
Release
the
accelerator
pedal,
immedi-
ately after the engine starts.3.If the
engine
still
will
not
start,
the
engine
could
be
flooded
with
too
much
gasoline.
While
depressing
the
brake
pedal
on
vehi-
cles
equipped
with
CVT
or
the
clutch
pedal
on
the
vehicles
equipped
with
man-
ual
transaxle,
push
the
accelerator
pedal
all the
way
down
and
hold
it there,
then
crank
the
engine
for
5
to
6
seconds.
Return
the
ignition
switch
to the
“LOCK”
position
and
release
the
accelerator
pedal.
Wait
a few
seconds,
and
then
crank
the
engine
again
for
5 to
6 seconds
while
depressing
the
brake
pedal
or
the
clutch
pedal,
but
do
not
push
the
accelerator
pedal.
Release
the
ignition
key
if
the
engine
starts.
If the
engine
fails
to
start,
repeat
these
procedures.
If the
engine
still
will
not
start,
contact
your
local
Mitsubi-
shi
Motors
dealer
or
a repair
facility
of
your choice for assistance.
When
the
ambient
temperature
is
-4°F
(-20
°C)
or
lower
, it may
not
be
possible
to
start
from
a standstill
even
with
the
selector
lever
in
the
“D”
(DRIVE)
or
“R”
(REVERSE) position. This
phenomenon
occurs
because
the
trans-
axle has
not warmed
up sufficiently
; it does
not
indicate
a problem.
If this
occurs,
place
the
selector
lever
in the
“P”
(PARK)
position
and let the engine idle for at least 10
minutes.
The
transaxle
will
warm
up,
and
you
will
be
able to drive normally
.
Do
not
leave
the
vehicle
during
warm-up
operation.
N00529600
101
The
electronic
immobilizer
is designed
to sig-
nificantly
reduce
the
possibility
of
vehicle
theft.
The
purpose
of
the
system
is to immo-
bilize
the
vehicle
if
an
invalid
start
is
attempted.
A valid
start
attempt
can
only
be
achieved
(subject
to certain
conditions)
using
a F.A.S.T
.-Key
“registered”
to
the
immobi-
lizer system.
W
AR
NING
Mak
e sur
e to
remove
the F.A.S.T.-key
from
the
emergency
key
after
the
engine
is
start
ed.
If not
removed,
the
F.A.S.T
.-key
could
fall
to
the
floor
, which
may
interf
ere with
pedal
operati
on.
Furthermor
e, the
F.A.S.T
.-ke
y coul
d pre-
vent
the
driv
er’s knee
airbag
from
inflat-
ing
normally
or
could
be
propelled
to
cause serious injury if the airbag inflates.NOTE
When
using
the
emer
gency
key
to start
the
engine,
firs
t remove
the
key
from
the
key
holder
. If the
emer
gency
key
is attached
to a
key holder
(key
ring), it may
beco
me
impos-
sible
to insert
the
keyless
operation
key
into
the emer
gency key, and
it may
pre
vent the
engi
ne from
being
started.
When the engine is hard to start
Startability
of
continuously
variable
transmission
(CVT)
vehicles
at extr
emely
cold ambient temperatur
e
Elect
ronic immobilizer (Anti-
theft starting system)

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-30
Features and controls
5
N0051550
0141
Press
the
remote
control
transmitter
buttons
to
lock
or
unlock
the
doors
and
to
open
the
trunk
lid.
It can
also
help
you
signal
for
attention
by
setting
off the
panic
alarm.
N0054420
0036
Press
the
LOCK
button
(1)
to
lock
all
the
doors. The turn signal lights will also blink once.
N005443
01135
Press
the
UNLOCK
button
(2)
to
unlock
the
driver
’s door
only
. Within
about
2 seconds,
press
the
UNLOCK
button
one
more
time
to
unlock all the doors.The
dome
light
will
turn
on
for
30
seconds.
The turn signal lights will also blink twice.The
front
side-marker
and
parking
lights
will
also turn on for about 30 seconds. Refer to “W
elcome light” on page 5-131.
N0054440
0012
Press
the
trunk
button
(3)
twice
within
about
5 seconds
and
the
trunk
lid
will
be
opened.
The
trunk
lid
must
be
closed
manually
after
it
has
been
opened.
N0054450
1065
Setting
of
the
horn,
turn
signal
lights
and
buzzer
of
the
keyless
entry
system
answer
-
back
function
can
be
changed
as
required.
This
is done
with
the
key
removed
from
the
ignition switch.The
horn
answerback
function
can
be
set
to
the
following
three
conditions.
Each
time
the
horn
answerback
function
is
set,
a chime
will
sound
to tell
you
the
condi-
tion of the answerback function.
Keyless entry system
1-
LOCK (
) button
2-
UNLOCK (
) button
3-
Trunk (
) butto
n
4-
PANIC (
) button
5-
Indicator light
To lock the doors
NOTE
If
you
press
the
LOCK button (1) twice
quickly
, the horn will sound once.
To unlock the doors
NOTE
The
door
unlock
function
can
be
set
so
that
all
doors
unl
ock
whe
n the UNL
OCK butto
n
(2) is pre
ssed once.
Ref
er to “Settin
g of doo
r
unlock function
” on pa
ge 5-3
1.
To open the trunk lid
Answerback
function
NOTE
The answe
rback
function
doe
s not
ope
rate
whe
n the key is in the ignition
switch
or any
door
is opened.
Horn deactivation/r
eactivation
Number
of
chimes
Condition
One chime
The horn will not sound.
Two chimes
The horn w
ill s
ound.
Four chimes
The horn will sound if the LOCK button is pressed twi
ce qui
ckly.

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-31
5
1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the UNLOCK button in step 3.
The
turn
signal
lights
answerback
function
can be set to the following seven conditions.Each
time
the
turn
signal
lights
answerback
function
is set,
a chime
will
sound
to tell
you
the condition of the answerback function.
1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the UNLOCK
button
(2)
for
4 to 10
seconds
and
press
the
LOCK
button
(1)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
The
buzzer
answerback
function
can
be
turned ON or OFF as required.
N005446
01112
The
door
unlock
function
can
be
set
to the
following two conditions.
Each
time
the
door
unlock
function
is set,
a
chime
will
sound
to tell you
the
condition
of
the door unlock function.1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
N00544700
015
If you
are
near
your
vehicle
and
feel
threat-
ened,
you
can
activate
the
alarm
to call
atten-
tion as follows:1.Press
the
PANIC
button
(4)
for
more
than
1 s
econd.
Changing
the
setting
of
the
turn
signal
lights answerback functionNumber of chimes
Condition
To lock
To un
lock
One chime
One flash
Two flashes
Two chimes
One flash
No flash
Three chimes
No flash
Two flashes
Four chimes
Two flashes
One flash
Five chime
s
No flash
One flash
Six chime
s
Two flashes
No flash
Seve
n
chimes
No flash
No flash
Buzzer deactivation/r
eactivation
Setting of door unlock function
Number of chimes
Condition
To lock
To un
lock
Number
of
chimes
Condition
One chim
e
All doors unlock
Two chime
s
Driver
’s door unlock only
Using the panic alarm

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-32
Features and controls
5
2.The
headlights
will
blink
on
and
off and
the
horn
will
sound
intermittently
for
about
3 minutes.
3.To turn
off the
alarm,
press
any
button
on
the remote control transmitte
r.
N0056130
0029
Only
a F.A.S.T
.-key
, which
has
been
pro-
grammed
into
the
vehicle’
s electronics,
can
lock
and
unlock
all
the
doors,
and
start
the
engine. If you
los
e the
F.A.S.T.-key
, you
can
order
a
F.A.S.T
.-key
from
your
authorized
Mitsubishi
Motors dealer by referring to the key number
.
To prevent
vehicle
theft,
the
ID
codes
for
all
the
F.A.S.T
.-keys
except
the
one
for
the
lost
F.A.S.T
.-key must be programmed again.
Take
your
vehicle
and
all
the
remaining
F.A.S.T
.-keys
to
your
authorized
Mitsubishi
Motors
dealer
to
have
your
ID
codes
pro-
grammed again.
N0056140
0020
To add
a F.A.S.T
.-key
, you
must
already
have
two registered F
.A.S.T
.-keys.
Registering
the
ID
code
can
be
done
by
your
authorized
Mitsubishi
Motors
dealer
. Or
it
can
be
done
by
yourself
(except
for
vehicles
sold
in
Canada).
For
you
to
register
the
ID
code
yourself,
follow
the
“Customer
F.A.S.T
.-key
programming”
procedure
below
.
If you
choose
to
have
your
authorized
Mit-
subishi
Motors
dealer
register
the
ID
code,
take
your
vehicle
and
all remaining
F.A.S.
T.-
keys
to
your
authorized
Mitsubishi
Motors
deale
r.
N00561
501116
You
can
program
new
F.A.S.T
.-keys
to
the
system
if you
have
two
valid
(already
regis-
tered)
F.A.S.T
.-keys,
blank
(not
registered)
F.A.S.T
.-key
and
emer
gency
key
(specially
cut
for
your
vehicle
at
your
Mitsubishi
Motors dealer).To use
the
new
F.A.S.T
.-key
, it is necessary
to
register
the
key
with
both
the
electronic
immobilizer and keyless entry system.Also
refer
to
“Electronic
immobilizer:
Cus-
tomer
F.A.S.T
.-key
programming”
on
page
5-28. For
F.A.S.T
.-key
programming,
follow
the
procedures below
.
1.Remove
the
eme
rgency
key
from
the
F.A.S.T
.-key
. Refer
to
“Eme
rgency
key”
on page 5-22.2.While
pushing
the
lock
release
buttons
(A),
remove
the
cover
of
the
ignition
switch.3.Insert
the
emer
gency
key
into
the
ignition
switch.4.Insert
the
valid
F.A.S.T
.-key
into
the
emer
gency key
.
Replacement
F.A.S.T
.-keys
Additional
F.A.S.T
.-keys
NOTE
You
are
provided
with
two
F.A.S.T
.-keys,
but
you may register up to four F
.A.S.T
.-keys.
Customer F
.A.S.T
.-key pr
ogram-
ming (Except for vehicles sold in Canada)

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-33
5
5.Turn
the
emer
gency
key
with
F.A.S.T
.-
key
to
the
“ON”
position.
(Perform
the
following procedure within 30 seconds)6.Remove
the
F.A.S.T
.-key
from
the
emer
-
gency key
.
7.With
the
first
valid
F.A.S.T
.-key
, press
the
UNLOCK
button
for
4 to 10
seconds
and
press the LOCK button during this time.8.Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing
the
LOCK
button
in step
7. (Per
-
form
the
following
procedure
within
30
seconds
)
9.With
the
second
valid
F.A.S.T
.-key
, press
the
UNLOCK
button
for
4 to 10
seconds
and
press
the
LOCK
button
during
this
time.
10.
Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing
the LO
CK
butt
on
in
step
9, and
the
immobilizer
display
will
blink
on
the
information
screen
in
the
multi-informa-
tion
display
. (Perform
the
following
pro-
cedure within 60 seconds)
11.Press
the
LOCK
button
twice
with
the
blank
F.A.S.T
.-key
and
the
immobilizer
display
will come
on
for
30
seconds
on
the
information
screen
in the
multi-infor
-
mation displa
y.
12.
This
completes
the
registration
of
the
F.A.S.T.-key.
N00561601
074
Your
F.A.S.T
.-key
operates
on
a radio
fre-
quency
subject
to
Federal
Communications
Commission
(FCC)
Rules
(For
vehicles
sold
in
U.S.A.)
and
Industry
Canada
Rules
(For
vehicles
sold
in
Canada).
This
device
com-
plies
with
Part
15
of
FCC
Rules
and
Industry
Canada licence-exempt RSS standard(s). Operation
is subject
to the
following
two
con-
ditions
.
NOTE
The
ind
icator
light
(5)
comes
on each
time
a
button
is pre
ssed.
The
keyless
entry
system
does
not
work
if
the
key
is in the
ignition switch.
The
F.A.S.
T.-key
can
be
used
from
about 40
feet
(12
m)
away
. However
, this
distance
may
change
if your
vehicle
is near
a TV
trans
mitting
tow
er, a pow
er
station,
or
a
radio
station.
If the UNL
OCK
button
(2)
is pre
ssed whe
n
all
doors
are
locked
and
no
doors
are
opened
within
about
30
seconds
, the
doors
will auto-
matically
re-lock.
If the followi
ng
conditions
are obse
rve
d after
pressing
the
buttons
on
the
remote
control
transmitter
, the battery
in the remo
te cont
rol
transmitter
may need
to be replaced
.
•The doors cannot
be locked or unl
ocked.
•The trunk
lid cannot
be ope
ned.
•The panic alar
m cannot
be ope
rated
.
•The
indicator
light
(5)
is dim
or
does
not
come
on.
If you
lose your
F.A.S.T.-key
, pleas
e contact
an authorized
Mitsubis
hi Motors
dealer
for
a
replacement.If you
wish
to obtain
an
additional
F.A.S.T
.-
key, pleas
e con
tact
an authorized
Mitsubi
shi
Motors
dealer
. A max
imu
m of four
F.A.S.T
.-
key can be
pro
grammed fo
r your vehicle.
To use
the
new
remote
control
transmitters,
it
is necessary
to register
the
key
with
both
the
electronic
immobilizer
and
keyless
entry
sys-
tem. Also refer to “Electronic
immobilizer
(Anti-
theft
starting
system):
Customer
F.A.S.T
.-
key programming” on page 5-28.
General
information
NOTE

Trunk lid
Features and controls 5-39
5
N00509501198
Insert the key and turn it clockwise. The trunk lid will pop up
slightly. Lift it to
open the trunk. Press the trunk button (Vehicles with keyless entry system or F.A.S.T.-key) or OPEN switch (Vehicles with F.A.S.T.-key). (See
“Keyless entry system” on page 5-7, 5-30 or “Free-hand Advanced Security Transmitter (F.A.S.T.-key)” on page 5-12.) The trunk lid will pop up
to slightly. Lift it to
open the trunk. Pull the trunk lid release lever, located to the left of the driver’s seat, up to open the trunk.
Trunk lid
WA R N I N G It is dangerous to drive with the trunk lid open since carbon monoxide (CO) gas can enter the cabin. CO is an invisible, odor- less gas that can cause unconsciousnessand even death. Do not allow children to have access to the trunk, either by climbing into the trunk from outside or through the inside of the vehicle. Always close the trunk lid whenyour vehicle is unattended. If trapped in the trunk, it is possible to escape from the trunk by using the in
side emergency trunk
release lever. (See “Inside emergency trunk lid release” on page 5-40.)CAUTION Do not stand behind the exhaust pipe when loading and unloading luggage. Heat from the exhaust could lead to burns.
To open Operation from outside the vehicle Using the key (Vehicles with key cylin- der) Using the remote control transmitter (Vehicles with keyless entry system orF. A . S . T. - k e y )
CAUTION Do not use the trunk lid release lever while the vehicle is moving. If the trunk lid is opened, objects in the trunk could fall ontothe road and cause an accident.
BK0230300US.bo
ok 39 ページ 2015年7月30日 木曜日 午後8時38分

Inside emergency trunk lid release 5-40 Features and controls
5
Pull the trunk lid downward as illustrated. Gently slam the trunk lid from the outside sothat it is completely closed. Always ensure the trunk lid is securely closed.
N00509800165
The emergency trunk lid release is designed to provide a way to open the trunk lid frominside the trunk. It was developed to help pre- vent death and serious injuries to children who might become locked inside a vehicletrunk. The emergency trunk lid release lever (see illustration) is mounted on the trunk lid. The lever glows in the dark after exposure to sunlight. You and your family should familiarize your- selves with the location and operation of the emergency trunk lid release lever. Childrenshould be taught not to play in or around vehicles.
NOTE
The trunk area light comes on when the trunk lid is opened, and goes out when it is closed. The trunk area light remains illuminated for a certain period and then goes off automati-cally. Refer to “Interior light auto-cutout function (dome light and other lights)” on page 5-169.
To close
CAUTION Be careful to prevent catching anyone’s fin- gers when closing the trunk lid.
Before starting the vehicle, be sure to con- firm that the trunk lid is closed. If the trunk lid opens while driving the vehicle, objects stored in the trunk could fall out onto the road.NOTE
Gas struts (A) are installed in the locations illustrated to support the trunk lid. Please observe the following in order to prevent damage or faulty operation. • Do not touch, push or pull the gas struts when closing the trunk lid. • Do not attach any plastic material, tape, etc., to the gas struts. • Do not tie string, etc., around the gas struts. • Do not hang any object on the gas struts.CAUTION
Inside emergency trunk lid release
BK0230300US.bo
ok 40 ページ 2015年7月30日 木曜日 午後8時38分