2016 MINI 3 door Owner's Manual

NOTE
Dirty bulbs have a reduced service life.
There is a risk of property damage. Do not hold
new bulbs with your bare hands. Use a clean
cloth or something similar, or hold the bulb by
its base. '

LED
low
beams/LED
high
beamsFollow the general instructions on lights andbulbs, refer to page 216.
The lights feature LED technology. In the case
of a malfunction, contact a dealer

5.Pull the bulb out of the fixture.6.Insert the new bulb and install the cover in
the reverse order.
LED
parking
lights/LED
fog
lights
Follow the general instructions on lights and
bulbs, refer to page 216.
The lights feature LED technology. In the case of a malfunction, contact a dealer

Vehicle
with
two
rear
fog
lights1Side tail lamps2Rear fog lights3License plate lamp4Center brake lamp
Side
tail
lamps
1Brake lights/tail lamps2Turn signal3Reversing lights
Side
LED
tail
lights
1Tail lamps2Turn signal3Brake light4Reversing lights
Side
tail
lampsFollow the general instructions on lights and
bulbs, refer to page 216.
Bulbs: P21W
1.Open tailgate, refer to page 40.2.Remove left or right cover.3.Through the opening, loosen the plug con~
nector, arrow 2 on the bulb holder.
Press the latches together, arrows 1, and
remove the bulb holder.4.Remove the bulb holder from the opening.5.Press the nonworking bulb gently into the socket, turn counterclockwise and remove.'

'

The wire is long enough to guide the socketdown and through between any heat shield
that may be installed and the bumper.4.Replace nonworking bulb.5.To install the new bulb, proceed in reverse
order of removal.
Right fog lamp:
1.Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket down and through between any heat shield
that may be installed and the bumper.2.Replace nonworking bulb.3.To install the new bulb, proceed in reverse
order of removal.
Side
turn
signal,
bulb
replacement
Follow the general instructions on lights and
bulbs, refer to page 216.
Bulbs:
'

Vehicle
batteryMaintenance
The battery is maintenance-free.
The added amount of acid is sufficient for the
service life of the battery.
More information about the battery can be re~
quested from a dealer

Fuses
Safety
information WARNING
Incorrect and repaired fuses can overload
electrical lines and components. There is a risk of fire. Never attempt to repair a blown fuse.Do not replace a nonworking fuse with a sub~stitute of another color or amperage rating. '