2016 MINI 3 door Owner's Manual

Overview
The oil filler neck is located in the engine com~
partment, refer to page 205.
Opening
the
oil
filler
neck1.Open the hood, refer to page 205.2.Turn the oil filler neck counter-clockwise,
arrow.3.Add engine oil.
After refilling, perform a detailed measure~ ment, refer to page 208.
Engine
oil
types
to
add
General
information
The engine oil quality is critical for the life of the
engine.
Safety
information NOTE
Oil additives can damage the engine.
There is a risk of property damage. Do not use
oil additives. '

The vehicle manufacturer recommends that
you have a dealer

CoolantVehicle
features
and
op

Adding1.Let the engine cool.2.Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres~
sure to dissipate, then open it.3.If the coolant is low, slowly add coolant up
to the specified level; do not overfill.4.Close cap.5.Have the cause of the coolant loss elimi~
nated as soon as possible.
Disposal
Comply with the relevant environmen~tal protection regulations when dispos~ ing of coolant and coolant additives.
Seite 212MOBILITYCoolant212
Online Edition for Part no. 01 40 2 972 313 - VI/16

MaintenanceVehicle
features
and
op

service center or repair shop. Records of regu~
lar maintenance and repair work should be re~
tained.
Socket
for
OBD
Onboard
Diagnosis
Safety
information NOTE
The socket for Onboard Diagnosis is an
intricate component intended to be used in
conjunction with specialized equipment to
check the vehicle

Replacing
componentsVehicle
features
and
op

Replace
rear
wiper
blade1.Fold up and hold the wiper arm firmly.2.Turn the wiper blade all the way back.3.Continue turning the wiper blade all the
way so that it pops out of the holder.4.Press the new wiper blade into the holder
until you hear it snap into place.5.Fold the wipers in.
Lamp
and
bulb
replace