2016 MERCEDES-BENZ GLE-Class lock

[x] Cancel search: lock

Page 323 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Warning/
indicator
lampNSignal type
Possible causes/consequences and M
Solutions
!NThe yellow ABS warning lamp is lit while the engine is running.
PLUG-IN HYBRID vehicles:
The yellow ABS warning lamp

Page 328 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Warning/
indicator
lampNSignal type
Possible causes/consequences and M
Solutions
?NThe red coolant warning lamp comes on while the engine is running.
The coolant level is too low.
If the coolant level

Page 331 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Useful information
i
This Operators Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of publica-
tion of the Operators Manual. Country-spe-
c

Page 332 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Stowage spaces
Important safety notes
GWARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants.
There is a risk of injury,

Page 338 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual XMake sure that the cargo net and the cargo
compartment cover are rolled up.
XTo remove:press button ;.
XSwing the combined cargo cover and net in
the direction of the arrow.
XFirst, detach the combin

Page 340 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual XFold out hook=on the underside of the
cargo compartment floor in the direction of
the arrow.
XAttach hook =to the cargo compartments
upper seal ?.
XTo close:detach hook =from the cargo
compartments

Page 342 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Temperature-controlled cup holder in
the front-compartment center console
:Cup holder
;Residual heat indicator lamp
=Switch
The temperature-controlled cup holder can be
used to keep cold drinks cool a

Page 344 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual XTo open:slide cover :to its foremost posi-
tion.
XFold cover =of the insert upwards.
XTo remove the insert: push insert=to the
left ?.
Insert =slides out slightly to the right.
XLift insert =up; and