Display messages
Introduction
General notes
Display message sappear in th emultifunction display.
Display message swit hgraphi cdisplays may be shown in simplified form in th eOperator's
Manual and may therefore diffe rfrom th emultifunction display.
Please respon din accordance wit hth edisplay message sand follow th eadditional note sin this
Operator's Manual.
Certain display message sare accompanied by an audible warnin gtone or acontinuous tone .
Whe nyou stop and par kth evehicle, pleas eobserv eth enote son :
RHOLD function (Ypage 217)
RParking(Ypage 189)
Hiding display messages
XPress th ea or% buttonon th esteerin gwheel.
The multifunction display hide sth edisplay message .
High-priorit ydisplay message sare shown in red in th emultifunction display. Some high-pri -
orit ydisplay message scanno tbe hidden .
The multifunction display shows these message scontinuously until th ecauses fo rth emes -
sage shav ebeen remedied.
Message memory
The on-boar dcompute rsaves certain display message sin th emessage memory .You can cal l
up th edisplay messages:
XPress =or; on thesteerin gwhee lto selec tth eServ.menu.
If there are display messages, th emultifunction display shows 2Messages
,fo rexample.
XPress th e9 or: buttonto selec tth eentry, e.g. 2messages.
XPress ato confirm .
XPress the9 or: buttonto scroll through th edisplay messages.
Whe nth eignition is switched off, all display message sare deleted, apar tfrom som ehigh-
priorit ydisplay messages. Once th ecauses of th ehigh-priorit ydisplay message shav ebeen
rectified, th ecorrespondin gdisplay message sare also deleted.
290Display messages
On-board computer and displays
Safety systems
Display messagesPossible causes/consequences andMSolutions
!÷
Currently Unavail‐
able See Opera‐
tor's Manual
ABS (Anti-lock Brake System), BAS (Brake Assist), ESP®(Elec-
tronic Stability Program), ESP®trailer stabilization, PRE‑SAFE®,
the HOLD function, hill start assist, Crosswind Assist, STEER CON-
TROL, Active Lane Keeping Assist and Active Blind Spot Assist are
temporarily unavailable.
COLLISION PREVENTION ASSIST, BAS PLUS and
PRE‑SAFE
®Brake may also have failed.
In addition, the ÷,åand! warning lamps light up in the
instrument cluster.
ATTENTION ASSIST is deactivated.
Possible causes are:
RSelf-diagnosis is not yet complete.
Rthe on-board voltage may be insufficient.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XCarefully drive a suitable distance, making slight steering move-
ments at a speed above 12 mph (20 km/h).
If the display message disappears, the functions mentioned
above are available again.
If the multifunction display still shows the display message:
XDrive on carefully.
XVisit a qualified specialist workshop.
!÷
Inoperative See
Operator's Manual
ABS, BAS, ESP®, ESP®trailer stabilization, PRE ‑SAFE®, the HOLD
function, hill start assist, Crosswind Assist, STEER CONTROL,
Active Lane Keeping Assist and Active Blind Spot Assist are
unavailable due to a malfunction.
COLLISION PREVENTION ASSIST, BAS PLUS and
PRE‑SAFE
®Brake may also have failed.
The $ (USA only) or J(Canada only), ÷,åand!
warning lamps in the instrument cluster also light up.
ATTENTION ASSIST is deactivated.
Display messages291
On-board computer and displays
Z
Display messagesPossible causes/consequences andMSolutions
GWARNING
The brakesystem continues to function normally, but without th e
function slisted above. The wheels could therefore loc kif you
brak ehard, fo rexample.
The steerabilit yand brakin gcharacteristics may be severely affec -
ted. The brakin gdistanc ein an emergenc ybrakin gsituation can
increase .
If ES P
®is no toperational, ES P®is unable to stabiliz eth evehicle.
There is an increase dris kof skiddin gand an accident.
XDrive on carefully.
XVisit aqualified specialist workshop immediately.
÷
Currently unavail‐
abl eSee Opera‐
tor's Manual
ES P®,ES P®trailer stabilization ,BAS, PRE ‑SAFE®, th eHOLD func-
tion ,hill start assist ,Crosswin dAssist, STEE RCONTROL ,Active
Lan eKeepin gAssis tand Active Blind Spot Assis tare unavailable
due to amalfunction .
COLLISION PREVENTION ASSIST ,BA SPLU Sand
PRE ‑S AF E
®Brake may also hav efailed.
In addition ,th e÷ andå warnin glamp sligh tup in th e
instrumen tcluster.
The self-diagnosi sfunction might no tbe complete, fo rexample.
ATTENTION ASSIST is deactivated.
GWARNIN G
The brakesystem continues to function normally, but without th e
function slisted above. The wheels could therefore loc kif you
brak ehard, fo rexample.
The brakin gdistanc ein an emergenc ybrakin gsituation can thus
increase .
If ES P
®is no toperational, ES P®is unable to stabiliz eth evehicle.
There is an increase dris kof skiddin gand an accident.
XCarefull ydrive asuitable distance, makin gslight steerin gmove-
ments at aspeed abov e12 mph (20 km/h).
If th edisplay message disappears, th efunction smentioned
abov eare available again .
If th emultifunction display still shows th edisplay message :
XDrive on carefully.
XVisitaqualified specialist workshop .
292Display messages
On-board computer and displays
Display messagesPossible causes/consequences andMSolutions
÷
Inoperative See
Operator'sManual
ES P®,ES P®trailer stabilization ,BAS, PRE ‑SAFE®, th eHOLD func-
tion ,hill start assist ,Crosswin dAssist, STEE RCONTROL ,Active
Lan eKeepin gAssis tand Active Blind Spot Assis tare unavailable
due to amalfunction .
COLLISION PREVENTION ASSIST ,BA SPLU Sand
PRE ‑S AF E
®Brake may also hav efailed.
In addition ,th e÷ andå warnin glamp sligh tup in th e
instrumen tcluster.
ATTENTION ASSIST is deactivated.
GWARNIN G
The brakesystem continues to function normally, but without th e
function slisted above. The wheels could therefore loc kif you
brak ehard, fo rexample.
The brakin gdistanc ein an emergenc ybrakin gsituation can thus
increase .
If ES P
®is no toperational, ES P®is unable to stabiliz eth evehicle.
There is an increase dris kof skiddin gand an accident.
XDrive on carefully.
XVisit aqualified specialist workshop .
T!
÷
Inoperative See
Operator'sManual
EB D(electronic brak eforc edistribution), ABS, ES P®,ES P®trailer
stabilization ,BAS, PRE ‑SAFE®, th eHOLD function ,hill start assist ,
Crosswin dAssist, STEE RCONTROL ,Active Lan eKeepin gAssis t
and Active Blind Spot Assis tare unavailable due to amalfunction .
COLLISION PREVENTION ASSIST ,BA SPLU Sand
PRE ‑SAFE
®Brake may also hav efailed.
In addition ,th e÷, åand! warnin glamp sligh tup in th e
instrumen tcluster and awarnin gtone sounds.
ATTENTION ASSIST is deactivated.
GWARNIN G
The brakesystem continues to function normally, but without th e
function slisted above. The wheels could therefore loc kif you
brak ehard, fo rexample.
The steerabilit yand brakin gcharacteristics may be severely affec -
ted. The brakin gdistanc ein an emergenc ybrakin gsituation can
increase .
If ES P
®is no toperational, ES P®is unable to stabiliz eth evehicle.
There is an increase dris kof skiddin gand an accident.
XDrive on carefully.
XVisit aqualified specialist workshop immediately.
Display messages29 3
On-board computer and displays
Z
Display messagesPossible causes/consequences andMSolutions
The redF(USAonly) or !(Canada only) indicato rlamp
flashes and th eyello w! warnin glamp lights up.
The electric parkin gbrak eis malfunctioning.
To release:
XSwitc hof fth eignition and tur nit bac kon .
XReleas eth eelectric parkin gbrak emanually.
To apply:
XSwitc hof fth eignition and tur nit bac kon .
XApply th eelectric parkin gbrak emanually.
If th ered F (USAonly) or !(Canada only) indicato rlamp
continues to flash:
XDo no tdrive on .
XSecureth evehicl eagainst rollin gaway (Ypage 428).
XShift th etransmissio nto position P.
XTurnth efron twheels toward sth ecurb.
XConsult aqualified specialist workshop .
The yellow! warnin glamp lights up. The red F(USAonly)
or ! (Canada only) indicato rlamp flashes fo rabout te nsec -
onds after th eelectric parkin gbrak ehas been applied or released.
It then goe sout or remain slit .
The electric parkin gbrak eis malfunctioning.
XSwitc hof fth eignition and tur nit bac kon .
XApply th eelectric parkin gbrake.
If it is no tpossibl eto engage th eelectric parkin gbrake:
XShift th etransmissio nto position P.
XVisitaqualified specialist workshop .
If it is no tpossibl eto release th eelectric parkin gbrake:
XReleas eth eelectric parkin gbrak eautomatically (Ypage 190).
If th eelectric parkin gbrak estill canno tbe released:
XConsult aqualified specialist workshop .
Display messages295
On-board computer and displays
Z
Display messagesPossible causes/consequences andMSolutions
ACTIVE CURVE SYS‐
TEM Malfunction
SeeOperator'sMan‐
ual
The Active Curv eSyste mis faulty. The vehicle's handlin gcharac -
teristics are severely impaired. Awarnin gtone also sounds.
GWARNIN G
There isaris kof an accident.
XDrive on carefully.
XAdjus tyour drivin gstyle to th ealtere dhandlin gcharacteristics .
XAvoid sudden acceleration around tight corners and fas tsteer -
in g movements.
XDo no tdrive at speeds abov e50 mph (80 km/ h).
XVisit a qualified specialist workshop immediately.
Á
RaisingMax.speed
12 mph
The vehicle is being adjusted to off-road level 3. The display mes-
sage informs you of the maximum speed permissible for off-road
level 3.
XDo not drive at speeds above 12 mph (20 km/h).
g
LoweringMax.
speed 12 mph
The vehicle is being lowered from off-road level 3 to off-road level
2. The display message informs you of the maximum speed per-
missible for off-road level 3.
XDo not exceed 12 mph (20 km/h) until the vehicle has reached
off-road level 2.
8
Different. lock
sys. Malfunction
The differential lock is faulty.
XDo not drive at speeds above 50 mph (80 km/h).
XHave the system checked at a qualified specialist workshop.
8
Different.locking
sys. cooling down
Please wait
The differential lock is too hot and has been disengaged.
XDrive on carefully.
XAllow the differential lock to cool down.
The differential lock re-engages as soon as it has cooled down.
LOW RANGE Stop
Applyparkingbrake
A gearshift process has been canceled. LOW RANGE is in the neu-
tral position. There is no connection between the engine and the
drive wheels.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XApply the electric parking brake. Do not continue driving under
any circumstances.
XRepeat the gearshift process.
312Display messages
On-board computer and displays
Tires
Display messagesPossible causes/consequences andMSolutions
Check Tire Pres‐
sure Soon
The tire pressure loss warning system has detected a significant
loss in pressure.
A warning tone also sounds.
Possible causes:
Ryou have changed the positions of the wheels and tires or instal-
led new wheels and tires.
Rthe tire pressure in one or more tires is not correct.
GWARNING
Tire pressures that are too low pose the following hazards:
Rthey may burst, especially as the load and vehicle speed
increase.
Rthey may wear excessively and/or unevenly, which may greatly
impair tire traction.
Rthe driving characteristics, as well as steering and braking, may
be greatly impaired.
There is a risk of an accident.
XStop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditions as you do so.
XSecure the vehicle against rolling away (Ypage 189).
XCheck the tires and, if necessary, follow the instructions for a
flat tire (
Ypage 387).
XCheck the tire pressures and, if necessary, correct the tire pres-
sure.
XRestart the tire pressure loss warning system when the tire
pressure is correct (
Ypage 412).
Check Tire Pres‐
sure Then Restart
Run Flat Indicator
The tire pressure loss warning system generated a display mes-
sage and has not been restarted since.
XSet the correct tire pressure in all four tires.
XRestart the tire pressure loss warning system (Ypage 412).
RunFlatIndicator
Inoperative
The tire pressure loss warning system is faulty.
XVisit a qualified specialist workshop.
Please Correct
Tire Pressure
The tire pressure is too low in at least one of the tires, or the tire
pressure difference between the wheels is too great.
XCheck the tire pressures at the next opportunity (Ypage 412).
XIf necessary, correct the tire pressure.
XRestart the tire pressure monitor (Ypage 415).
318Displa y messages
On-board computer and displays
Display messagesPossible causes/consequences andMSolutions
TirePress. Moni‐
tor Currently
Unavailable
Becaus ethere is interferenc efrom astron gsource of radi owaves,
no signal sfrom th etire pressur esensor sare detected. The tire
pressur emonitor is temporarily malfunctioning.
XDrive on .
The tire pressur emonitor restarts automatically as soo nas th e
problem has been resolved.
Tir ePress. Sen ‐
sor(s) Missin g
There is no signal from th etire pressur esensor of on eor several
wheels. The pressur eof th eaffecte dtire is no tdisplayed in th e
multifunction display.
XHav eth efault ytire pressur esensor replaced at aqualified spe -
cialist workshop .
TirePressure Mon ‐
itorInoperative
No Wheel Sensor s
The wheels mounted do no thav e a suitable tire pressur esensor .
The tire pressur emonitor is deactivated.
XMoun twheels wit hsuitable tire pressur esensors.
The tire pressur emonitor is activated automatically after drivin g
fo r a few minutes.
Tir ePress. Moni‐
tor Inoperative
The tire pressur emonitor is faulty.
XVisit aqualified specialist workshop .
Vehicle
Display messagesPossible causes/consequences and MSolutions
Shift to 'P' or
'N'toStartEngine
You haveattempte dto start th eengin ewit hth etransmissio nin
position Ror D.
XShift th etransmissio nto position Por N.
Apply brake to
deselect Par k(P)
position
You hav eattempte dto mov eth etransmissio nselector lever to
position D,Ror Nwithout depressin gth ebrak epedal .
XDepress th ebrak epedal .
To shift out of P
or N, depress
brake and start
engine
Withth eengin eswitched off, you hav eattempte dto shift th e
selector lever out of position Por Ninto another transmissio n
position .
XDepress th ebrak epedal .
XStart th eengine.
320Display messages
On-board computer and displays