2016 MERCEDES-BENZ CLS-Class display

It is only possible to shift the transmission from
positionPto the desired position if you depress
the brake pedal. If the brake pedal is not
depressed, the DIRECT SELECT lever can still be
moved but the parking lock remains engaged.
iUpshifts take place at higher engine speeds
after a cold start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Hill start assist
Hill start assist helps you when pulling away for-
wards or in reverse on an uphill gradient. It holds
the vehicle for a short time after you have
removed your foot from the brake pedal. This
gives you enough time to move your foot from
the brake pedal to the accelerator pedal and to
depress it before the vehicle begins to roll.
GWARNING
After a short time, hill start assist will no lon-
ger brake your vehicle and it could roll away.
There is a risk of an accident and injury.
Therefore, quickly move your foot from the
brake pedal to the accelerator pedal. Never
leave the vehicle when it is held by hill start
assist.
Hill start assist is not active if:
Ryou are pulling away on a level road or on a
downhill gradient.
Rthe transmission is in position N.
Rthe parking brake is applied.
RESP®is malfunctioning.
ECO start/stop function
Introduction
The ECO start/stop function switches the
engine off automatically if the vehicle is stopped
under certain conditions.
The engine starts automatically when the driver
wants to pull away again. The ECO start/stop
function thereby helps you to reduce the fuel
consumption and emissions of your vehicle.
Important safety notes
GWARNING
If the engine is switched off automatically and
you exit the vehicle, the engine is restarted
automatically. The vehicle may begin moving.
There is a risk of accident and injury.
If you wish to exit the vehicle, always turn off
the ignition and secure the vehicle against
rolling away.
General notes
:ECO start/stop display
The ECO start/stop function is activated when-
ever you start the engine using the Smartkey or
the Start/Stop button.
If the engine has been switched off automati-
cally by the ECO start/stop function, the ¤
symbol is shown in the multifunction display.
Mercedes-AMG vehicles: the AMG menu in the
multifunction display additionally shows the
Stop/Start active
message.
Mercedes-AMG vehicles: the ECO start/stop
function is only available in drive program C.
Automatic engine switch-off
If the vehicle is braked to a standstill inDor N,
the ECO start/stop function switches off the
engine automatically.
The ECO start/stop function is operational
when:
Rthe indicator lamp in the ECO button is lit
green.
Rthe outside temperature is within the range
that is suitable for the system.
Rthe engine is at normal operating tempera-
ture.
Rthe set temperature for the vehicle interior
has been reached.
Rthe battery is sufficiently charged.
130Driving
Driving and parking

Automa tic trans mission
Import ant safety notes
GWARNIN G
If th eengin espee dis abov eth eidlin gspee d
and you engage transmission position Dor R,
th evehicl ecould pull away suddenly. There is
a ris kof an accident.
When engagin gtransmission position Dor R,
always firmly depress th ebrak epedal and do
no tsimultaneously accelerate .
GWARNING
The automatic transmission switches to neu-
tral position Nwhen you switch off th eengine.
The vehicl emay rol laway. There is aris kof an
accident.
Afte rswitching off th eengine, always switch
to parking position P.Preven tth eparked vehi-
cle from rollin gaway by applyin gth eparking
brake.
Selector lever (Mercedes-AMG vehi-
cles)
Overview oftrans mission positions
jPark position wit hparking loc k
kReverse gear
iNeutral
hDrive
Transmission position and drive pr o-
gram display
The curren ttransmission position and drive pro -
gram appear in th emultifunction display.
:Transmission position display
;Drive program display
Additionally, displays next to th eselector lever
mar kth ecurren ttransmission position .
The indicators ligh tup when th eSmartke yis
inserted int oth eignition lock. The indicators go
out when th eSmartke yis remove dfrom th e
ignition lock.
If th etransmission position display in th emul-
tifunction display is no tworking ,you should pull
away carefully to chec kwhether th edesired
transmission position is engaged. Ideally, you
should select transmission position Dand drive
program Cor S.
Engaging pa rkposition P
XWhen th evehicl eis stationary, press but -
to n:.
134Automatic transmission
Driving an d parking

DIRECT SELECT lever
Overview of transmission positions
jPar kposition wit hparking loc k
kReversegear
iNeutral
hDrive
The DIREC TSELECT lever is on th eright of th e
steerin gcolumn .
The DIREC TSELECT lever always return sto it s
original position .The curren ttransmissio nposi-
tion P,R,N or Dappears in th etransmissio n
position display in th emultifunction display
(
Ypage 135).
Transmission position an ddrive pro-
gram display
The curren ttransmissio nposition and drive pro -
gram appear in th emultifunction display.
:Transmissio nposition display
;Drive program display
The arrows in th etransmissio nposition display
sho whow and into whic htransmissio nposition s
you can shift usin gth eDIREC TSELECT lever.
If th etransmissio nposition display in th emul-
tifunction display is no tworking ,you should pull
away carefully to chec kwhether th edesire d
transmissio nposition is engaged. Ideally, you
should selec ttransmissio nposition Dand drive
program Eor S.
Engaging park position P
!If theengin espeed is to ohig hor th evehicle
is moving, do no tshift th eautomatic trans -
missio ndirectl yfrom Dto R,from Rto Dor
directl yto P. The automatic transmissio n
could otherwise be damaged .
XPush theDIREC TSELECT lever in th edirection
of arrow P.
Transmissio nposition display Pis shown in
th emultifunction display.
Depressing th ebrake and pushin gth eDIREC T
SELECT lever up or down disengage sth epark-
in g lock. The transmissio nis in Nneutral.
In order to shift from par kposition Pdirectl yinto
R or D:
Rdepress th ebrake peda land
Rpush th eDIREC TSELECT lever up or down
past th efirst poin tof resistanc e
Engaging park position Pautomatically
Par kposition Pis automatically engage dif:
Ryou switch of fth eengin eusin gth eSmartke y
and remov eth eSmartKey
Ryou switch of fth eengin eusin gth eSmartke y
or usin gth eStart/Sto pbutto nand ope nth e
driver's doo ror front-passenger doo r
Rthedriver's doo ris opene dwhen th evehicle is
stationary or drivin gat ver ylow speed and th e
transmissio nis in position Dor R
Under certain conditions, th eautomatic trans -
missio nshift sautomatically to transmissio n
position Pif th eHOLD function or DISTRONIC
PLU Sis activated. Observ eth einformation on
th eHOLD function (
Ypage 165) and on
DISTRONIC PLU S (Ypage 159).
Engaging reverse gea r R
!Only shift theautomatic transmissio nto R
when th evehicle is stationary.
XIf th etransmissio nis in position Dor N:push
th eDIREC TSELECT lever up past th efirst
poin tof resistance.
XIf th etransmissio nis in position P:depress
th ebrake peda land push th eDIREC TSELECT
lever up past th efirst poin tof resistance.
The EC Ostart/sto pfunction is no tavailable
when revers egear is engaged. Further informa-
Automatic transmission135
Driving and parking
Z

reduces load change reactions and is conducive
to a sporty driving style. The sound generated by
the double-clutch function depends on the drive
program selected.
Kickdown
Use kickdown for maximum acceleration:
XDepress the accelerator pedal beyond the
pressure point.
The automatic transmission shifts to a lower
gear depending on the engine speed.
XEase off the accelerator pedal once the
desired speed is reached.
The automatic transmission shifts back up.
Rocking the vehicle free
Rocking the vehicle free by shifting back and
forth between transmission positionsDand R
can help to free a vehicle that has become stuck
in mud or snow. The vehicle's engine manage-
ment restricts switching between transmission
positions Dand Rto speeds up to a maximum of
5 mph (9 km/h). To shift back and forth between
transmission positions Dand R, move the
DIRECT SELECT lever up and down past the
point of resistance.
Program selector button
General notes
All vehicles (except Mercedes-AMG vehicles and
vehicles with AMG sports package)
XPress program selector button :repeatedly
until the letter for the desired drive program
appears in the multifunction display.
Vehicles with the AMG Sports package
XPress program selector button :repeatedly
until the letter for the desired drive program
appears in the multifunction display.
The program selector button allows you to
choose between different driving characteris-
tics.
iFurther information about permanent drive
program M(Ypage 141).
As well as this permanent drive program M,
you can also activate temporary drive pro-
gram M(
Ypage 140).
EEconomyComfortable, economical
driving
S SportSporty driving style
M ManualManual gear shifting
iFor further information on the automatic
drive program, see (Ypage 139).
iThe automatic transmission shifts to auto-
matic drive program Eeach time the engine is
started.
138Automatic transmission
Driving and parking

Mercedes-AMG vehicles
Drive program selector with manual drive program
XTurn drive program selector:until the
desired drive program appears in the multi-
function display in the speedometer.
The drive program indicator on drive program
selector :lights up in red.
iFurther information about permanent drive
program M(Ypage 141).
As well as this permanent drive program M,
you can also activate temporary drive pro-
gram M(
Ypage 140).
CControlled
EfficiencyComfortable, economical
driving
S SportSporty driving style
S+ SportPlusParticularly sporty driving
style
MManualManual gear shifting
RS RACE
STARTOptimal vehicle accelera-
tion from a standstill
iFor further information on the automatic
drive program, see (Ypage 139).
iThe automatic transmission shifts to auto-
matic drive program Ceach time the engine is
started.
iRS cannot be selected during normal driv-
ing. For further information on RACE START,
see (
Ypage 165).
Steering wheel paddle shifters
In the manual drive program, you can change
gears manually using steering wheel paddle
shifters :and ;.
Further information about permanent drive pro-
gram M(
Ypage 141).
Further information about temporary drive pro-
gram M(
Ypage 140).
iYou can only change gear with the steering
wheel paddle shifters when the transmission
is in position D.
Automatic drive program
Automatic drive program E
Drive program E(drive program Con Mercedes-
AMG vehicles) is characterized by the following:
Rcomfort-oriented engine and automatic trans-
mission settings.
Roptimal fuel consumption resulting from the
automatic transmission shifting up sooner.
Rthe vehicle pulling away more gently in
forward and reverse gears, unless the accel-
erator pedal is depressed fully.
Rthe vehicle having improved driving stability,
for example on slippery road surfaces.
Rthe automatic transmission shifting up
sooner. This results in the vehicle being driven
at lower engine speeds and the wheels being
less likely to spin.
Automatic transmission139
Driving and parking
Z

Automa tic drive program S
Drive program S(or ,in th ecas eof Mercedes-
AM Gvehicles, drive program sS and S+)is char-
acterize dby th efollowing:
Rsport yengin eand automatic transmission
settings.
Rth eautomatic transmission shifting up later.
th efuel consumption possibl ybein ghigher as
a result of th elater automatic transmission
shif tpoints .
Manual drive program M
Genera lnotes
In this drive program ,you can briefl ychang e
gear yourself by usin gth esteering whee lpaddl e
shifters. The transmission mus tbe in position D.
You can activat emanual drive program Min th e
E and Sautomatic drive programs.
iAs well as temporar ydrive program M,you
can also activat epermanen tdrive program M
(
Ypage 138).
Further information about permanen tdrive
program M(
Ypage 141).
Acti vating
XShift th etransmission to position D.
XPull thelef tor right steering whee lpaddl e
shifte r (Ypage 139).
Manual drive program Mis temporarily acti-
vated. The selected gear and Mappear in th e
multifunction display.
Shi fting gear s
If you pull on th elef tor right steering whee l
paddl eshifter, th eautomatic transmission
switches to manual drive program Mfor alimi -
te damount of time. Dependin gon whic hpaddl e
shifte ris pulled ,th eautomatic transmission
immediately shifts int oth enext gear down or
up, if permitted.
XTo shift up :pull th eright-hand steering whee l
paddl eshifte r (Ypage 139).
The automatic transmission shifts up to th e
next gear .
iIf themaximum engin espee don th ecur -
rentl yengage dgear is reached and you con-
tinue to accelerate ,th eautomatic tra
nsmis
-sion automatically shifts up in order to pre
-
ven tengin edamage.
XTo shift down :pull on th eleft-han dsteering
whee lpaddl eshifte r (Ypage 139).
The automatic transmission shifts down to
th enext gear .
iIf theengin eexceeds th emaximum engin e
spee dwhen shifting down ,th eautomatic
transmission protect sagainst engin edamag e
by no tshifting down .
iAutomatic down shifting occur swhen
coasting .
Shiftrecommendation
The gearshif trecommendation sassist you in
adopting an economical drivin gstyle. The rec -
ommended gear is shown in th emultifunction
display.
XShift to recommended gear ;according to
gearshif trecommendation :when shown in
th emultifunction display of th einstrumen t
cluster.
Deactivating
If you hav eactivated manual drive program M,it
will remain active for acertain amount of time.
Under certain condition sth eminimum amount
of time is extended, e.g. in th ecas eof lateral
acceleration ,during an overrun phas eor when
drivin gon steep terrain .
If manual drive program Mhas been deactiva-
ted, th eautomatic transmission shifts int oth e
automatic drive program that was last selected, i.e .E or S.
You can also deactivat emanual drive program
M yourself :
XPull on th eright-hand steering whee lpaddl e
shifte rand hold it in plac e (Ypage 139).
or
XUse th eDIRECT SELECT lever to switch th e
transmission position (Ypage 135).
140Automatic transmission
Driving and parking

or
XUse the program selector button to change
the drive program (Ypage 138).
Manual drive program Mis deactivated. The
automatic transmission switches into the
automatic drive program that was last selec-
ted, i.e. Eor S.
Manual drive program (Mercedes-
AMG vehicles and vehicles with the
AMG sports package)
General information
In this drive program, you can permanently
change gear yourself by using the steering
wheel paddle shifters. The transmission must be
in position D.
iAs well as this permanent drive program M,
you can also activate temporary drive pro-
gram M(
Ypage 140).
Switching on the manual drive program
XPress the program selector button
(Ypage 138) repeatedly until Mappears in
the multifunction display.
XMercedes-AMG vehicles: turn the drive pro-
gram selector (Ypage 139) until Mappears in
the multifunction display.
The indicator Mon the drive program selector
lights up in red.
Manual drive program Mis different from drive
programs Sand S+with regard to spontaneity,
responsiveness and smoothness of gear
changes.
Manual drive program Mcan be selected using
the drive program selector. In manual drive pro-
gram M, you can change gear using the steering
wheel paddle shifters if the transmission is in
position D. The gear currently selected and
engaged is shown in the multifunction display.
Upshifting
XPull the right-hand steering wheel paddle
shifter.
The automatic transmission shifts up to the
next gear.
Mercedes-AMG vehicles
!In manual drive program M, the automatic
transmission does not shift up automatically
even when the engine limiting speed for the
current gear is reached. When the engine lim-
iting speed is reached, the fuel supply is cut to
prevent the engine from overrevving. Always
make sure that the engine speed does not
reach the red area of the tachometer. There is
otherwise a risk of engine damage.
:Gear indicator
;Upshift indicator
Before the engine speed reaches the red area,
an upshift indicator will be shown in the multi-
function display.
XWhen the UPmessage appears in the multi-
function display, pull on the right-hand steer-
ing wheel paddle shifter.
Shift recommendation
The gearshift recommendations assist you in
adopting an economical driving style. The rec-
ommended gear is shown in the multifunction
display.
XIf corresponding gearshift recommenda-
tion :appears in the multifunction display
on the instrument cluster, pull on the right-
hand steering wheel paddle shifter
(
Ypage 139).
The automatic transmission shifts to recom-
mended gear ;.
Automatic transmission141
Driving and parking
Z

RIf fuel is swallowed, seek medical assis-
tance without delay. Do not induce vomit-
ing.
RImmediately change out of clothing which
has come into contact with fuel.
GWARNING
Electrostatic buildup can create sparks and
ignite fuel vapors. There is a risk of fire and
explosion.
Always touch the vehicle body before opening
the fuel filler flap or touching the fuel pump
nozzle. Any existing electrostatic buildup is
thereby discharged.
!Do not use diesel to refuel vehicles with a
gasoline engine. Do not switch on the ignition
if you accidentally refuel with the wrong fuel.
Otherwise, the fuel will enter the fuel system. Even small amounts of the wrong fuel could
result in damage to the fuel system and the
engine. Notify a qualified specialist workshop
and have the fuel tank and fuel lines drained
completely.
!Overfilling the fuel tank could damage the
fuel system.
!Take care not to spill any fuel on painted
surfaces. You could otherwise damage the
paintwork.
!Use a filter when refueling from a fuel can.
Otherwise, the fuel lines and/or injection sys-
tem could be blocked by particles from the
fuel can.
Do not get into the vehicle again during the refu-
eling process. Otherwise, electrostatic charge
could build up again.
If you overfill the fuel tank, fuel could spray out
when the fuel pump nozzle is removed.
For further information on fuel and fuel quality
(
Ypage 332).
Refueling
General information
Pay attention to the important safety notes
(Ypage 143). The fuel filler flap is unlocked or locked auto-
matically when you unlock or lock the vehicle
with the key or using KEYLESS-GO.
The position of the fuel filler cap is displayed
8
in the instrument cluster. The arrow next
to the filling pump indicates the side of the vehi-
cle.
Opening the fuel filler flap
:To open the fuel filler flap
;To insert the fuel filler cap
=Tire pressure table
?Instruction label for fuel type to be refueled
XSwitch off the engine.
XRemove the SmartKey from the ignition lock.
or, on vehicles with KEYLESS‑GO:
XOpen the driver's door.
The on-board electronics now have status 0.
This is the same as the SmartKey having been
removed.
XRemove the Start/Stop button from the igni-
tion lock (Ypage 127).
XPress the fuel filler flap in the direction of
arrow :.
The fuel filler flap opens slightly.
XOpen the fuel filler flap fully.
XTurn the fuel filler cap counterclockwise and
remove it.
XInsert the fuel filler cap into the holder on the inside of fuel filler flap ;.
XCompletely insert the filler neck of the fuel
pump nozzle into the tank, hook in place and
refuel.
XOnly fill the tank until the pump nozzle
switches off.
Do not add any more fuel after the pump stops
filling for the first time. Otherwise, fuel may leak
out.
144Refueling
Driving and parking