2016 MERCEDES-BENZ CLA child seat

[x] Cancel search: child seat

Page 61 of 374

MERCEDES-BENZ CLA 2016  Owners Manual Always ensure that all vehicle occupants have
their seat belts fastened correctly and are sit-
ting properly. Particular attention must be
paid to children.
Observe the safety notes on the seat belt
(

Page 62 of 374

MERCEDES-BENZ CLA 2016  Owners Manual tions and the notes on use. Please ensure,
that the base of the child restraint system is
always resting completely on the seat cush-
ion. Never place objects, e.g. cushions, under
or behind the child

Page 63 of 374

MERCEDES-BENZ CLA 2016  Owners Manual Always comply with the manufacturer's
installation and operating instructions for the
child restraint system used.
Before every trip, make sure that the LATCH-
type (ISOFIX) child restraint system

Page 65 of 374

MERCEDES-BENZ CLA 2016  Owners Manual Rearward-facing child restraint system If it is absolutely necessary to install a rear-
ward-facing child restraint system on the
front-passenger seat, always make sure that
the front-passenger front

Page 90 of 374

MERCEDES-BENZ CLA 2016  Owners Manual X
Fold the rear seat backrest forwards
( Y
page 276). X
Insert a suitable tool �D , e.g. a screwdriver,
into opening �C in the paneling.
The trunk lid is released. X
Open the trunk lid.
Emergency rele

Page 103 of 374

MERCEDES-BENZ CLA 2016  Owners Manual The seat belt should: R
fit snugly across your body R
be routed across the middle of your
shoulder R
be routed in your pelvic area across the
hip joints X
Before starting off, adjust the rear-view mir

Page 104 of 374

MERCEDES-BENZ CLA 2016  Owners Manual rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
! Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a r

Page 108 of 374

MERCEDES-BENZ CLA 2016  Owners Manual Problems with the seat heating Problem
Possible causes/consequences and �P Solutions
The seat heating has
switched off prema-
turely or cannot be
switched on. The on-board voltage is too low because t
Page:   < prev 1-8 9-16 17-24 25-32 next >