5377-3. Do-it-yourself maintenance
7
Maintenance and care
NX200t_OM_USA_OM78081U
■Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by your Lexus
dealer.
●Headlight low beams
●Headlight high beams (LED type)
●Front turn signal lights (LED type)
●Parking lights and Daytime running lights
●Front fog lights
●Cornering lights (if equipped)
●Front side marker lights (LED type)
●Side turn signal lights
●Stop/tail lights
●Rear side marker lights
●High mounted stoplight
●License plate lights
●Outer foot lights
■After replacing the bulbs
■LED lights
The headlight low beams, headlight high beams (LED Type), front turn signal lights (LED
Type), parking lights, daytime running lights, front fog lights, cornering lights (if
equipped), front side marker lights (LED Type), side turn signal lights, rear side marker
lights, stop/tail lights, rear side marker lights, high mounted stoplight and license plate
lights, outer foot lights consist of a number of LEDs. If any of the LEDs burn out, take your
vehicle to your Lexus dealer to have the light replaced.
■Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not indicate a
malfunction. Contact your Lexus dealer for mo re information in the following situations:
●Large drops of water have built up on the inside of the lens.
●Wa t e r h a s b u i l t u p i nside the headlight.
■When replacing light bulbs
P. 5 2 2
After removing the engine compartment cover,
return the cover to original position with the
clips.
Insert
Press
1
2
5458-2. Steps to take in an emergency
8
When trouble arises
NX200t_OM_USA_OM78081U
Take out the towing eyelet. (P. 5 6 1 )
Remove the eyelet cover using a flat-
head screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the hole
and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench.
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn th e engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: P. 5 7 5
Installing towing eyelets
1
2
3
4
5
6
7
575
8
When trouble arises
8-2. Steps to take in an emergency
NX200t_OM_USA_OM78081U
If the shift lever cannot be shifted from P
Set the parking brake.
Turn the engine switch to ACCESSORY mode.
Depress the brake pedal.
Pry the cover up with a flathead
screwdriver or equivalent tool.
To prevent damage to the cover, cover
the tip of the screwdriver with a rag.
Press the shift lock override button.
The shift lever can be shifted while the
button is pressed
If the shift lever cannot be shifted with your foot on the brake pedal, there may
be a problem with the shift lock system (a system to prevent accidental opera-
tion of the shift lever). Have the vehicl e inspected by your Lexus dealer imme-
diately.
The following steps may be used as an emergency measure to ensure that the
shift lever can be shifted:
1
2
3
4
5
647Alphabetical index
NX200t_OM_USA_OM78081U
EngineAccessory mode................................. 194
Compartment ..................................... 490
Engine switch ........................................ 193
Hood ....................................................... 488
How to start the engine ................... 193
Identification number .......................592
If your vehicle has to be stopped in an emergency ........... 541
Ignition switch (Engine switch) .... 193
Overheating ........................................ 584
Engine compartment cover ...............491
Engine coolant Capacity ................................................ 594
Checking............................................... 496
Preparing and checking before winter ......................................317
Warning light ...................................... 550
Engine coolant temperature gauge ........................................................ 87
Engine immobilizer system ................. 75
Engine oil Capacity .................................................592
Checking................................................492
Warning light ...................................... 550
Engine oil maintenance data ........... 494
Engine switch ...........................................193
EPS (Electronic Power Steering) Function .................................................. 297
Warning light ........................................ 551
Event data recorder (EDR) ...................10 Flat tire ...................................................... 560
Floor mats....................................................26
Fluid
Automatic transmission ..................595
Brake........................................................596
Washer .................................................... 501
Fog lights Replacing light bulbs ....................... 537
Switch ........................................................218
Front passenger occupant classification system ............................. 51
Front passenger’s seat belt reminder light ..................................... 552
Front seats ................................................. 137 Adjustment.............................................. 137
Cleaning................................................. 476
Correct driving posture .................... 28
Driving position memory.................145
Head restraints .....................................149
Power easy access system .............145
Seat heaters ..........................................430
Seat position memory .......................145
Front side marker lights Light switch.............................................210
Replacing light bulbs .......... 530, 537
Wattage ................................................ 598F