2016 LEXUS LS460L maintenance

5816-3. Do-it-yourself maintenance
6
Maintenance and care
LS460/LS460L_GE (OM50G06E)
Trunk
Remove the lid.
Remove the fuse with the pullout
tool.
Only type A fuse can be removed
using the pullout tool.
3

5826-3. Do-it-yourself maintenance
LS460/LS460L_GE (OM50G06E)
Check if the fuse is blown.
Normal fuse
Blown fuse
Type A and B:
Replace the blown fuse with a new fuse of an appropriate amperage rating. The
amperage rating can be found on the fuse box lid.
Type C and D:
Contact your Lexus dealer.
4
1
2
Type AType B
Type CType D

5836-3. Do-it-yourself maintenance
6
Maintenance and care
LS460/LS460L_GE (OM50G06E)
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may need
replacement. ( P. 584)
●If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
■If there is an overload in a circuit
The fuses are designed to blow, protect ing the wiring harness from damage.
CAUTION
■To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
●Never use a fuse of a higher amperage rating than that indicated, or use any
other object in place of a fuse.
●Always use a genuine Lexus fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
●Do not modify the fuses or fuse boxes.
NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your Lexus
dealer as soon as possible.

5846-3. Do-it-yourself maintenance
LS460/LS460L_GE (OM50G06E)
Check the wattage of the light bulb to be replaced. (P. 664)
Light bulbs
You may replace the following bulbs by yourself. The difficulty level of
replacement varies depending on the bulb. As there is a danger that
components may be damaged, we recommend that replacement is
carried out by your Lexus dealer.
Preparing for light bulb replacement

5856-3. Do-it-yourself maintenance
6
Maintenance and care
LS460/LS460L_GE (OM50G06E)
Vehicles with discharge headlights
Headlight high beams or high beam/near-infrared ray transmitters
Rear fog lights (if equipped)
Vehicles with LED headlights
Rear fog lights (if equipped)
Bulb locations
1
2

5866-3. Do-it-yourself maintenance
LS460/LS460L_GE (OM50G06E)
■Headlight high beams or high beam/near-infrared ray transmitters
(vehicles with discharge headlights)
Remove the engine compartment covers. ( P. 541)
Before replacing the bulbs:
Left side
Remove the securing bolt, and
remove the washer fluid filler
opening.
Right side
Remove the securing bolts and
nut, and move the fuse block.
Replacing light bulbs
1
2

5876-3. Do-it-yourself maintenance
6
Maintenance and care
LS460/LS460L_GE (OM50G06E)
Turn the cover counterclock-
wise and remove it.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
3
4
5

5886-3. Do-it-yourself maintenance
LS460/LS460L_GE (OM50G06E)
Replace the light bulb, and
install the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to
check that it is not loose, turn the
headlights on once and visually
confirm that no light is leaking
through the mounting.
Install the cover and turn it
clockwise.
Install by performing the reverse of .
Install the engine compartment covers.
6
7
8
92
10