2016 JEEP RENEGADE tire pressure

[x] Cancel search: tire pressure

Page 576 of 688

JEEP RENEGADE 2016 1.G Owners Manual Tire And Loading Information Placard
This placard tells you important information about the:
1. Number of people that can be carried in the vehicle.
2. Total weight your vehicle can carry.3. Tire size

Page 580 of 688

JEEP RENEGADE 2016 1.G Owners Manual WARNING!
Overloading of your tires is dangerous. Overloading
can cause tire failure, affect vehicle handling, and
increase your stopping distance. Use tires of the
recommended load capacity for your v

Page 581 of 688

JEEP RENEGADE 2016 1.G Owners Manual WARNING!(Continued)
•Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.
•Always drive with each tire inflated to the recom-
mende

Page 582 of 688

JEEP RENEGADE 2016 1.G Owners Manual Tire Inflation Pressures
The proper cold tire inflation pressure is listed on the
driver’s side B-Pillar or rear edge of the driver’s side door.
At least once a month:
•Check and adjust tire pre

Page 583 of 688

JEEP RENEGADE 2016 1.G Owners Manual Example: If garage temperature = 68°F (20°C) and the
outside temperature = 32°F (0°C) then the cold tire
inflation pressure should be increased by 3 psi (21 kPa),
which equals 1 psi (7 kPa) for ev

Page 584 of 688

JEEP RENEGADE 2016 1.G Owners Manual Radial Ply Tires
WARNING!
Combining radial ply tires with other types of tires
on your vehicle will cause your vehicle to handle
poorly. The instability could cause a collision. Al-
ways use radial pl

Page 586 of 688

JEEP RENEGADE 2016 1.G Owners Manual Snow tires generally have lower speed ratings than what
was originally equipped with your vehicle and should
not be operated at sustained speeds over 75 mph
(120 km/h). For speeds above 75 mph (120 km

Page 588 of 688

JEEP RENEGADE 2016 1.G Owners Manual Tread Wear Indicators
Tread wear indicators are in the original equipment tires
to help you in determining when your tires should be
replaced.These indicators are molded into the bottom of the tread
g
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >