2016 JEEP PATRIOT warning light

[x] Cancel search: warning light

Page 244 of 587

JEEP PATRIOT 2016 1.G Owners Manual Transmission Temperature Indicator Light
Red TelltaleLight What It Means
Transmission Temperature Indicator Light
This light indicates that the transmission fluid temperature is running hot. This may

Page 334 of 587

JEEP PATRIOT 2016 1.G Owners Manual AUTOSTICK ......................... .355
▫ AutoStick (Six-Speed Automatic
Transmission) ....................... .355
▫ AutoStick (CVT) — If Equipped ...........357
 FOUR-WHEEL DRIVE OPERATION

Page 340 of 587

JEEP PATRIOT 2016 1.G Owners Manual ENGINE BLOCK HEATER — IF EQUIPPED
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
ground

Page 350 of 587

JEEP PATRIOT 2016 1.G Owners Manual control (refer to “AutoStick (Six-Speed Automatic Trans-
mission)” in this section for further information) to select
a lower gear. Under these conditions, using a lower gear
will improve performa

Page 362 of 587

JEEP PATRIOT 2016 1.G Owners Manual An advantage of the higher ground clearance is a better
view of the road, allowing you to anticipate problems.
They are not designed for cornering at the same speeds as
conventional two-wheel drive ve

Page 366 of 587

JEEP PATRIOT 2016 1.G Owners Manual the front end begins to bounce, ease off the throttle
slightly to bring all four tires back on the ground. As you
approach the crest of the hill, ease off the throttle and
slowly proceed over the top.

Page 367 of 587

JEEP PATRIOT 2016 1.G Owners Manual Driving Across An Incline
If at all possible avoid driving across an incline. If it is
necessary, know your vehicle’s abilities. Driving across
an incline places more weight on the down-hill wheels,

Page 370 of 587

JEEP PATRIOT 2016 1.G Owners Manual •Check threaded fasteners for looseness, particularly on
the chassis, drivetrain components, steering, and sus-
pension. Retighten them, if required, and torque to the
values specified in the Servic