2016 JEEP GRAND CHEROKEE light

[x] Cancel search: light

Page 558 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual TIRE PRESSURE MONITOR SYSTEM (TPMS)
The Tire Pressure Monitoring System (TPMS) will warn
the driver of a low tire pressure based on the vehicle
recommended cold tire placard pressure.
The tire pressur

Page 559 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual For example, your vehicle has a recommended cold
(parked for more than three hours) tire placard pressure
of 33 psi (227 kPa). If the ambient temperature is 68°F
(20°C) and the measured tire pressur

Page 560 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual CAUTION!(Continued)
•After inspecting or adjusting the tire pressure,
always reinstall the valve stem cap. This will
prevent moisture and dirt from entering the valve
stem, which could damage the Ti

Page 561 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual Premium System
The Tire Pressure Monitor System (TPMS) uses wireless
technology with wheel rim-mounted electronic sensors to
monitor tire pressure levels. Sensors, mounted to each
wheel as part of the

Page 562 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual Tire Pressure Monitoring Low Pressure Warnings
The Tire Pressure Monitoring Telltale Light will
illuminate in the instrument cluster, and an au-
dible chime will be activated, when one or more of
the

Page 563 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual NOTE:When filling warm tires, the tire pressure may
need to be increased up to an additional 4 psi (30 kPa)
above the recommended cold placard pressure in order
to turn the Tire Pressure Monitoring Te

Page 564 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual 4. Using tire chains on the vehicle.
5. Using wheels/tires not equipped with TPM sensors.
NOTE:There is no tire pressure monitoring sensor in the
spare tire. The TPMS will not be able to monitor the t

Page 565 of 745

JEEP GRAND CHEROKEE 2016 WK2 / 4.G Owners Manual General Information
This device complies with Part 15 of the FCC rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions:
1. This device may not cause harmful interf