2016 INFINITI Q70 change wheel

8
essential information
Accessing the Front Cup Holders
To open the cup holders, push the
lid
1 down and release.
For more information, refer to the “Instruments and
controls (section 2)” of your Owner’s Manual.1
INFINITI Drive Mode Selector
Turn the switch to one of the following positions to select the correspo\
nding drive mode:
1 • (Standard) — Used for standard or normal driving.
2 SPORT — The engine and transmission will
adjust, resulting in higher engine rpm and a more
aggressive shift pattern. In this mode, fuel economy
may be reduced.
3 SNOW — Used on snowy roads or slippery areas. In
this mode, engine output is controlled to avoid wheel spin.
4 ECO — Adjusts engine and transmission points to enhance fuel economy.
ECO PEDAL SYSTEM (if so equipped)

With the INFINITI Drive Mode Selector switch in the ECO mode, the ECO pedal system
assists the driver in improving fuel economy.

The ECO pedal system applies force to make the accelerator pedal heavier\
, depending on
the accelerator pedal operation.

To change the ECO pedal reaction force:
1. Press the SETTING button on the control panel.
2. Touch the “ECO DRIVE” key.
3. Touch the “ECO pedal” key and select one of the options below:
• OFF — Turns the ECO pedal system off.
• Soft — Softens the reaction force.
• Standard — Reaction force is normal.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
12
3
4
1932611_16a_Q70_US_pQRG_092415.indd 89/24/15 11:08 AM

23

6. Confirm the correct voice commands are being used. Glance at the screen \
to see the
currently available commands.
7. Train the system using the Speaker Adaptation Mode. See your Owner’s \
Manual for
detailed information.

Press the or button on the steering wheel to interrupt the voice prompts at any time\

and speak a command after the tone.

For vehicles not equipped with Navigation:
• To use the system faster, you may speak the second level commands with t\
he main
menu command on the main menu. For example, press the
or button on the
steering wheel, and after the tone, say “Call Redial”.

For vehicles equipped with Navigation:
• Refer to the “Voice recognition (section 9)” of your Navigation \
System Owner’s Manual
for more information.

The “Help” command can be used to hear a list of available command\
s at any time.

When speaking phonebook names, please be aware some cellular phones requ\
ire the last
name to be spoken before the first name. For example, “Michael Smith”\
may be spoken as
“Smith Michael”.

To cancel a Voice Recognition session, say “Cancel” or “Quit”\
or press and hold the or button on the steering wheel for 5 seconds.

To go back to the previous command, say “Go Back” or “Correctio\
n”.

For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s
Manual and visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEDURE

The vehicle must be stationary when connecting the
cellular phone.*
1. Press the
button and select the
“Connect Phone” key.
2. Initiate connecting from the cellular phone.
• The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible cellular phones, please visit
www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN, enter “1234”
from the handset. (The PIN is assigned
by INFINITI and cannot be changed.)
• For cellular phones that support SSP (Simple
Secure Pairing), confirm the PIN on the vehicle
display matches the PIN displayed on the
cellular phone.
3. When connecting is complete, the screen will return
to the Phone menu.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1932611_16a_Q70_US_pQRG_092415.indd 239/24/15 11:10 AM

25
RECEIVING/ENDING A CALL


To accept the call, press the button on the
steering wheel or touch the “Answer” key.

To reject the call, touch the “Reject Call” key.

To hang-up, press the button on the steering
wheel or touch the “Hang up” key.
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
1. Press the
button on the steering wheel. The
system announces the available commands.
2. Say: “Connect Phone”. The system acknowledges
the command and announces the next set of
available commands.
3. Say: “Add Phone”. The system acknowledges the
command and asks you to initiate connecting
from the cellular phone handset.
4. Initiate pairing from the cellular phone.
• The connecting procedure varies according to each cellular phone model. \

For detailed connecting instructions and a list of compatible cellular p\
hones, please
visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN, enter “1234” from the handset. (The PIN \
is assigned by
INFINITI and cannot be changed.)
5. Say a name for the cellular phone when the system asks to provide one. Y\
ou can give the
cellular phone a name of your choice.
PHONEBOOK REGISTRATION

When the cellular phone is connected to the in-vehicle module, the data \
stored in the
cellular phone, such as the phonebook, outgoing call logs, incoming call\
logs and missed
call logs, is automatically transferred and registered to the system.

The availability of this function depends on each cellular phone. The co\
pying procedure
also varies according to each cellular phone. See your cellular phone’\
s Owner’s Manual for
more information.

Up to 1,000 entries per registered cellular phone can be stored in the p\
honebook.
MAKING A CALL
1. Push the
button on the steering wheel. A tone will sound.
2. Say: “Call”. The system acknowledges the command and announces the\
next set of
available commands.
1932611_16a_Q70_US_pQRG_092415.indd 259/24/15 11:10 AM