14
Seat Adjustments
POWER SEAT ADJUSTMENTS 
     To slide the seat forward or backward, push the 
 switch 1 forward or backward.
    To recline the seatback, push the  switch 2 
forward or backward.
SEAT LIFTER
     To adjust the angle of the front portion or height of the seat, push the\
 front or rear end of 
the 
 switch 1 up or down.
POWER LUMBAR SUPPORT (if so equipped)  
 
    To adjust the seat lumbar support, push the front or back end of the  switch 3.
MANUAL LUMBAR SUPPORT (if so equipped)
 
 
    To adjust the seat lumbar support, move the lever up or down.
SIDE SUPPORT (if so equipped for driver’s seat)
    The driver’s seat side support adjusts the support to your torso.
    Push the switch 4 away from you to loosen the support or pull the switch 4 toward you 
for more support.
MANUAL THIGH EXTENSION (if so equipped)
    To slide the thigh extension forward or backward, pull up on the lever 5 under the front of 
the seat and slide forward or backward. Release the lever to lock the se\
at in position.
For more information, refer to the “Safety – Seats, seat belts and supplemental restraint system (se\
ction 1)”  of your  
Owner’s Manual.
 1
 4
 2
 3
 5
Trunk Lid Release
    Using the Intelligent Key while it is in your pocket   
or purse:
 
 
• 
  
Push the trunk open request switch 1 for 
more than 1 second while carrying the Infiniti 
Intelligent Key with you.
  Using the key fob:
 
 
• 
  
Press the HOLD button on the Intelligent Key for 
more than 1 second.
 
 
• 
 
Push the trunk open request switch 1 while all of 
the doors are unlocked.
    Using the trunk lid release switch 2 on the  
instrument panel:
 
 
• 
 
From inside the vehicle, push down on the trunk 
lid release switch 
2 on the instrument panel.
    To completely disable all power to the trunk 
lid, push the trunk release power cancel switch 
3 located in the glove box to the OFF 
position. While in this position, the trunk lid cannot be opened with th\
e trunk open request 
switch 
1, the HOLD button on the Intelligent Key or the trunk lid release switch 2.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual. 
 1
 2
 3
first drive features
1967179_16b_Q50_US_QRG_012916.indd   141/29/16   1:53 PM  
         
        
        15
Heated Seats (if so equipped)
      There are two ways to operate the heated seats:
 
 
1. Push the heated seat switch  1. 
 
   
• 
  
Every push of the switch allows you to 
  
cycle through the five different modes of  
“AUTO”, “High”, “Mid”, “Low” and “OFF”.
 
 
2
. 
 While on the “CLIMATE” screen on the lower
  
display, touch the left or right heated seat icon 
 2.
 
   
• 
 
The “Left Heater Settings” or “Right Heater 
Settings” screen is displayed with a list of the 
five different modes of “AUTO”, “High”, “Mid”, 
“Low” and “OFF”.
 
   
• 
 
The indicator light on the heated seat switch  1  
will illuminate when the system is in “AUTO”, “High”, “Mi\
d” or “Low”.
 
   
• 
 
While in “AUTO”, the heated seats will turn on and off automatical\
ly depending on 
temperature conditions in the vehicle compartment.
 
   
• 
 
To view which of the five modes the system is in, press the CLIMATE
  button 
 3. This 
will bring up the “CLIMATE” screen on the lower display. From here\
, you will see the 
heated seat icons 
 2 for the driver’s and passenger’s side, and below the icon is the \
mode the system is in currently.
For more information, refer to the “Heater and air conditioner (section 3)” of your InTouch Owner’s Manual.
 2 2
 3
 1 1
Automatic Drive Positioner (if so equipped)
    Two positions for the driver’s seat, steering column 
and outside mirrors can be stored in the automatic 
drive positioner memory.
    Follow this procedure to set the memory positions:
 
 
• 
  
Confirm the shift lever is in the 
 P (PARK) position.
 
 
• 
  
Adjust the driver’s seat, steering column and 
outside mirrors to the desired positions using the adjusting switches fo\
r each feature.
 
 
• 
  
Push the 
 SET switch, and within 5 seconds, push the memory switch (1 or 2) for at  
least 1 second.
 
 
• 
  
The indicator light on the memory switch you select will illuminate for \
approximately  
5 seconds and a buzzer will sound. 
 
 
• 
  
The driver’s seat, steering column and outside mirror positions are n\
ow set to  
your preferences.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1967179_16b_Q50_US_QRG_012916.indd   151/29/16   1:53 PM