Using Voice Recognition
5-4
Skipping Prompt Messages
While prompt message is being stated
Ü Shortly press the
key on the
steering remote controller (under 0.8
seconds).
The prompt message is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
Re-starting Voice Recognition
While system waits for a command Ü
Shortly press the
key on the
steering remote controller (under 0.8
seconds).
The command wait state is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
Ending Voice Recognition
While Voice Recognition is operating
Ü Press and hold the
key on
the steering remote controller (over 0.8
seconds).
While using voice command, pressing a
different key on the steering wheel remote
control will end voice command.
i Information
!Ÿ In a state where the system is waiting for
a voice command, say “cancel” or “exit” to
end voice command.
!Ÿ In a state where the system is waiting for
a voice command, press and hold the
key on the steering remote con-
troller to end voice command.
Adjusting Voice Recognition
Volum e
While Voice Recognition is operating
Ü Tu r n
the volume knob left/right
to adjust the voice recognition prompt
volume.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
