2016 Hyundai Creta VIN

Low Tire Pressure
Warning Light
(if equipped)
L o w t i r e p r e s s u r e t e l l t a l e
The low tire pressure telltale comes
on for 3 seconds after the ignition
switch is turned to the "ON" position.
The low tire pressure telltale will illu
minate after it blinks for approximate
ly one minute when there is a prob
lem with the Tire Pressure
Monitoring System.
If this occurs, we recommend that
the system be checked by an author
ized HYUNDAI dealer.
For details, refer to the TPMS on
chapter 6.
Fuel Filter Warning Light
(Diesel Engine)
T h i s w a r n i n g l i g h t i l l u m i n a t e s :
• Once you turn the ignition switch orEngine Start/Stop button to the ON position.
It illuminates for approximately 3seconds and then goes off.
• When water has accumulated inside the fuel filter.
In this case, remove the water from
the fuel filter.
For more details, refer to “Fuel
Filter” in chapter 7.
•When the Fuel Filter Warning Light
illuminates, engine power (vehicle
speed & idle speed) may
decrease.
•If you keep driving with the warning
light on, engine parts (injector,
common rail, high pressure fuel
pump) may be damaged. If this
occurs, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer as
soon as possible.
NOTICE
3-51
Convenient features of your vehicle
3
Safe stopping
•The TPMS cannot alert you to
severe and sudden tire damage
caused by external factors.
•If you feel any vehicle instability,
immediately take your foot off
the accelerator, apply the
brakes gradually and with light
force, and slowly move to a safe
position off the road.
WARNING

3-55
Convenient features of your vehicle
3
Overspeed Warning
Light (if equipped)
T h i s w a r n i n g l i g h t b l i n k s :
When you drive the vehicle more
than 120 km/h.
This is to prevent you from drivingyour vehicle with overspeed.
The overspeed warning chime also sound for approximately 5 seconds.
Master Warning Light
(if equipped)
T h i s i n d i c a t o r l i g h t i l l u m i n a t e s :
When the remaining mileage or time
is 0 on the “Service Interval” in the
cluster.
If the service interval setting is reset,
the master warning light turns off.
Glow Indicator Light
(Diesel Engine)
T h i s i n d i c a t o r l i g h t i l l u m i n a t e s :
When the engine is being preheated
with the ignition switch or Engine
Start/Stop button in the ON position.
The engine can be started after theglow indicator light goes off.
The illumination time varies with the engine coolant temperature, air
temperature, and battery condition.
If the indicator light remains on or
blinks after the engine has warmed
up or while driving, there may a mal
function with the engine preheating
system.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.
Information Engine
Preheating
I f t h e e n g i n e d o e s n o t s t a r t w i t h i n 1 0
s e c o n d s a f t e r t h e p r e h e a t i n g i s c o m
p l e t e d , s e t t h e i g n i t i o n s w i t c h o r
E n g i n e S t a r t / S t o p b u t t o n t o t h e
L O C K o r O F F p o s i t i o n f o r 1 0 s e c o n d s
a n d t h e n t o t h e O N p o s i t i o n i n o r d e r
t o p r e h e a t t h e e n g i n e a g a i n .
i120km/h

KEY OUT Indicator Light
(if equipped)
When the Engine Start/Stop button
is in the ACC or ON position, if any
door is open, the system checks for
the smart key.
T h i s i n d i c a t o r l i g h t b l i n k s :
When the smart key is not in the
vehicle and any door is open with the
ignition switch or Engine Start/Stop
button in the ACC or ON position.
At this time, if you close all doors, the chime will also sound for
approximately 5 seconds.
The indicator will go off while the vehicle is moving.
Warning Messages
(for Type B, if equipped)
Shift to "P" position
(for smart key system and auto
matic transaxle)
This warning message is displayed if
you try to turn off the engine without
the shift lever in P (Park) position.
At this time, the Engine Start/Stop
button turns to the ACC position (If
you press the Engine Start/Stop but
ton once more, it will turn to the ONposition).
Low Key Battery
(for smart key system)
This warning message is displayed if
the battery of the smart key is dis
charged when the Engine Start/Stop
button is in the OFF position.
3-56
Convenient features of your vehicle
OGS045108
OLF044126L
KEY
OUT

3-63
Convenient features of your vehicle
3
LCD display (if equipped)
LCD display control
The LCD display modes can be
changed by using the control switches.
(1) / : Changing LCD modes (2) ▲, ▼ : Changing items for each
LCD modes
(3) OK / RESET : Selecting or reset ting items
LCD modes
Modes SymbolExplanation
Trip Computer
This mode displays information related to
driving such as tripmeter, fuel economy,etc.
For more information, refer to "Trip
Computer" in this chapter.
InformationThis mode displays information such
service intervals, warning messages, etc.
User SettingsIn this mode, you can change settings of
the doors, lamps, etc.
or or
OGS045053

3-64
Convenient features of your vehicle
Cannot edit settings while driving
This warning message appears if
you try to adjust the User Settings
while driving.
For safety, change the User Settings
after parking the vehicle and engaging
the parking brake (manual transaxle)
or moving the shift lever to P (Park)
position (automatic transaxle).
Trip computer mode
The trip computer mode displays
information related to vehicle driving
parameters including distance to
empty, fuel economy, trip meter infor
mation and vehicle speed.
For more details, refer to “Trip
Computer” in this chapter.
Information mode
S e r v i c e I n t e r v a l
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 miles) or 30
days, "Service in" message is dis
played for several seconds each time
you set the ignition switch to the ONposition.
For the setting of the service interval,
refer to "User Settings Mode" of the
LCD display.
OGS045104OGS045105OGS045140/OGS045139
■ Automatic transaxle■Manual transaxle

3-67
Convenient features of your vehicle
3
O t h e r F e a t u r e s
ItemsExplanation
Fuel Economy Auto Reset
• Off : The average fuel economy will not reset automatically whenever refueling.
• On (After Ignition) : The average fuel economy will reset automatically when driving.
• On (After Refueling) : The average fuel economy will reset automatically when refueling.
For more details, refer to “Trip Computer” in this chapter.
Temperature UnitChoose the temperature unit. (°C,°F)
LanguageChoose the language.
Gear position Popup
If you select this function, the current shift gear position is displayed in the cluster for about 2
seconds when shifting into other positions (P/R/N/D).
If you do not select this function, the shift gear Popup is not displayed in the cluster.

3-69
Convenient features of your vehicle
3
Trip computer
The trip computer is a microcomput
ercontrolled driver information sys
tem that displays information related
to driving.
Information
S o m e d r i v i n g i n f o r m a t i o n s t o r e d i n
t h e t r i p c o m p u t e r ( f o r e x a m p l e
A v e r a g e V e h i c l e S p e e d ) r e s e t s i f t h e
b a t t e r y i s d i s c o n n e c t e d . ■
Type A
To change items, press the TRIP but
ton for less than 1 second.i
Tripmeter B
Tripmeter A
Average fuel consumption
Instant fuel consumption*
Average speed
Elapsed time
Digital speedometer on/off setting
Distance to empty
* : if equipped
OGS045055
OGS045053
■ Type A
■Type B

3-71
Convenient features of your vehicle
3
A v e r a g e F u e l E c o n o m y ( 2 )
•The average fuel economy is calcu
lated by the total driving distance
and fuel consumption since the last
average fuel economy reset.
• The average fuel economy can be reset both manually and automati
cally.
Manual reset
To clear the average fuel economy
manually, press the OK button (or
RESET button) on the steering wheel
for more than 1 second when the aver
age fuel economy is displayed.
Automatic reset
To automatically reset the average fuel
economy after refueling, select the
“After Refueling” feature in the User
Settings Mode on the LCD display
(Refer to "LCD Display“ in this chapter).
If the “After Refueling” feature is selected, the average fuel economy
will be cleared to zero (), when driv
ing speed exceeds 1km/h, after refuel
ing more than 6 liters.
Information
T h e v e h i c l e m u s t b e d r i v e n f o r a m i n
i m u m o f 3 0 0 m e t e r s s i n c e t h e l a s t i g n i
t i o n k e y c y c l e b e f o r e t h e a v e r a g e f u e l
e c o n o m y i s r e c a l c u l a t e d .
I n s t a n t F u e l E c o n o m y ( 3 )
This mode displays the instantaneous
fuel economy while driving when the
vehicle speed is greater than 10 km/h.
Trip A/B
T r i p m e t e r ( 1 )
• The tripmeter is the total driving distance since the last tripmeter reset.
• To reset the tripmeter, press the OK button (or RESET button) on
the steering wheel for more than 1
second when the tripmeter is dis
played.
i
OIB044158/OGS045104
■Type A■Type B