2016 Hyundai Creta lock

4.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5.Remove the bulb from the socket by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
6.Insert a new bulb into the socket.
7.Install the socket into the assembly by aligning the tabs on the socket
with the slots on the assembly and
turning the socket clockwise.Rear fog lamp (if equipped)
1.Remove the socket from the assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
2.Remove the bulb from the socket by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
3.Insert a new bulb in the socket.
4.Reinstall the light assembly to the body of the vehicle.
High mounted stop light
If the light does not operate, we rec
ommend that the vehicle be checked
by an authorized HYUNDAI dealer.
7-86
Maintenance
OGC074031

License plate light bulb replace
ment
1.Remove the tailgate trim.
2.Remove the socket by turning itcounterclockwise.
3.Remove the bulb by pulling it straight out. 4.Install a new bulb.
5.Install the socket by turning it
clockwise.
6.Install the tailgate trim.
7-87
7
Maintenance
OGS075057
OGS075058

The tires supplied on your new vehi
cle are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side (or front passenger’s side) cen
ter pillar gives the tire pressures rec
ommended for your car. The engine number is stamped on
the engine block as shown in the
drawing.
8-98
Specifications & Consumer information
tIrE SpECIfICatIoN aND
prESSurE labEl
OGS085004
OGS085009L
■Right Hand Drive
■Left Hand Drive
■ Gamma 1.6 MPI
■U2 1.4 TCIOGS085008/OGS085007/OGS085001
■U2 1.6 TCI
ENGINE NumbEr