2016 FIAT FULLBACK weight

HOW TO CHANGE A
TYRE
132) 133)
Before changing a tyre, first stop your
vehicle in a safe, flat location.
1. Park the vehicle on level and stable
ground, free of loose pebbles, etc.
2. Set the parking brake firmly.
3. On vehicles with manual
transmission, turn the ignition switch to
the “LOCK” position or put the
operation mode in OFF, and move the
gearshift lever to the “R” (Reverse)
position. On vehicles with automatic
transmission, move the selector lever to
the “P” (PARK) position, and turn the
ignition switch to the “LOCK” position
or put the operation mode in OFF.
4. Turn on the hazard flashers and set
up a warning triangle, flashing signal
lamp, etc., at an adequate distance
from the vehicle, and have all your
passengers leave the vehicle.
5. To prevent the vehicle from rolling
when jacking up the vehicle, place
chocks or blocks (A) at the tyre that is
diagonally opposite from the tyre (B)
you are changing.
257) 258)
NOTE The chocks shown in the
illustration do not come with your
vehicle. It is recommended that you
keep ones in the vehicle for use if
needed.
NOTE If chocks are not available, use
stones or any other objects that are
large enough to hold the wheel in
position.
6. Get the jack, jack handle and wheel
nut wrench ready. Refer to “Tools, jack
and jack handle”.Spare wheel information
The spare wheel is stored under the
floor of the cargo bed. Check the air
pressure of the spare tyre frequently
and make sure it is ready for
emergency use at any time.
Maintaining the spare wheel at the
highest specified air pressure will
ensure that it can always be used under
any conditions (city/high-speed driving,
varying load weight, etc.).
259)
To remove the spare wheel
1. Set the jack handle (Club cab) (refer
to “To use the jack handle, Club cab”).
2. Insert the jack handle (A) in the hole
(B) below the rear gate.
A
B
314AHA102162
A
B
315AHA102263
194
IN CASE OF EMERGENCY

TECHNICAL SPECIFICATIONS
Everything you may find useful for
understanding how your vehicle is
made and works is contained in this
chapter and illustrated with data, tables
and graphics. For the enthusiasts and
the technician, but also just for those
who want to know every detail of their
vehicle.VEHICLE LABELING..........266
ENGINE SPECIFICATIONS......268
VEHICLE DIMENSIONS........271
VEHICLE PERFORMANCE......279
VEHICLE WEIGHTS..........281
ELECTRICAL SYSTEM.........289
TYRES AND WHEELS.........291
REFILL CAPACITIES..........292
FLUIDS AND LUBRICANTS......300
265

Certification plate (Vehicles for Gulf
countries only)
The certification plate is riveted as
illustrated. The plate shows production
year and month, identification number
and category.
1. Production year and month
2. Maximum vehicle weight
3. Maximum weight on each axle (Front)
4. Maximum weight on each axle (Rear)
5. Identification number
6. Category
417AHA101426
418AHA105831
419AHA105844
1342
65
420AHA105857
267

VEHICLE WEIGHTS
Single Cab
ItemPetrol-powered vehicles
2WD 2WD Hi-Rider
Kerb weightWithout optional parts 1,410 kg 1,505 kg
With full optional parts 1,470 kg 1,520 kg
Maximum gross vehicle weight 2,570 kg 2,750 kg
Maximum axle weightFront 1,030 kg 1,260 kg
Rear 1,700 kg 1,840 kg
Seating capacity2 persons
3 persons
(3)
(3) Vehicles equipped with bench seat
281

ItemDiesel-powered vehicles
2WD 2WD Hi-Rider 4WD
Kerb weightWithout optional
parts1,500 kg
1,505 kg(1) (2)1,620 kg 1,690 kg
With full optional
parts1,560 kg
1,570 kg
(1) (2)1,645 kg 1,775 kg
Maximum gross vehicle weight 2,570 kg 2,850 kg 2,760 kg
Maximum axle
weightFront 1,030 kg 1,260 kg 1,260 kg
Rear 1,700 kg 1,840 kg 1,840 kg
Seating capacity2 persons
3 persons
(3)
(1) Vehicles with intercooler
(2) Vehicles for specific markets
(3) Vehicles equipped with bench seat
282
TECHNICAL SPECIFICATIONS

Club Cab
Item Weights
Kerb weightWithout optional parts 1,700 kg
With full optional parts 1,735 kg
Maximum gross vehicle weight 2,750 kg
Maximum axle weightFront 1,260 kg
Front 1,840 kg
Seating capacity2 persons
4 persons
(1)
(1) Vehicles equipped with rear seat
283

Double Cab
Petrol-powered vehicles
Item 2WD 2WD Hi-Rider 4WD
Kerb weightWithout optional
parts1,510 kg 1,615 kg1,690 kg
1,685 kg(1)
With full optional
parts1,570 kg 1,660 kg1,770 kg
1,765 kg(1)
Maximum gross vehicle weight 2,525 kg 2,650 kg2,760 kg
2,700 kg(1)
Maximum axle
weightFront 1,030 kg 1,260 kg 1,260 kg
Rear 1,700 kg 1,840 kg 1,840 kg
Seating capacity5 persons
6 persons
(3)
(1) Vehicles for specific Countries
(3) Vehicles equipped with bench seat
284
TECHNICAL SPECIFICATIONS

Double Cab
Diesel-powered vehicles 4D56
Item 2WD2WD Hi-Rider
M/T A/T
Kerb weightWithout optional
parts1,590 kg
1,605 kg(1)1,705 kg
1,755 kg(1)1,735 kg
With full optional
parts1,655 kg
1,665 kg
(1)1,805 kg
1,790 kg(1)1,835 kg
Maximum gross vehicle weight 2,570 kg2,760 kg
2,750 kg
(1)
Maximum axle
weightFront 1,030 kg 1,260 kg
Rear 1,700 kg 1,840 kg
Seating capacity5 persons
6 persons
(2)
(1) Vehicles for specific Countries
(2) Vehicles equipped with bench seat
285