2016 DODGE GRAND CARAVAN radio

[x] Cancel search: radio

Page 379 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual The radio uses the following limits for file systems:
•Maximum number of folder levels: 8
• Maximum number of files: 255
• Maximum number of folders. (The radio display of file
names and folder

Page 380 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual MPEG
Specification Sampling
Frequency (kHz) Bit Rate (kbps)
MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224,
192, 160, 128,
112, 96, 80, 64, 56, 48, 40, 32
MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128,

Page 381 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual To increase the speed of disc loading, it is recommended
to use CD-R media and single-session discs. To create a
single-session disc, enable the “Disc at Once” option
before writing to the disc.
L

Page 382 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual NOTE:The AUX device must be turned on and the
device’s volume set to the proper level. If the AUX audio
is not loud enough, turn the device’s volume up. If the
AUX audio sounds distorted, turn the

Page 383 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual Electronic Serial Number/Sirius Identification
Number (ESN/SID)
Please have the following information available when
calling:
1. The Electronic Serial Number/Sirius IdentificationNumber (ESN/SID).
2.

Page 384 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual •Dense tree coverage may interrupt reception in the
form of short audio mutes.
• Driving under wide bridges or along tall buildings can
cause intermittent reception.
• Placing objects over or to

Page 385 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual RW/FF
Pushing the RW (Rewind) or FF (Fast Forward) buttons
causes the tuner to search for the next channel in the
direction of the arrows.
TUNE Control (Rotary)
Turn the rotary TUNE/SCROLL control kno

Page 386 of 707

DODGE GRAND CARAVAN 2016 5.G Owners Manual SET Button — To Set The Pushbutton Memory
When you are receiving a channel that you wish to
commit to pushbutton memory, push the SET button. The
symbol SET 1 will now show in the display window.
Se