2016 Citroen GRAND C4 PICASSO RHD gearbox

289
Spare wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
A ll of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hock   for   immobilising   the   vehicle   (except  
v

ersions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
*
  According   to   equipment.
8
In the event of a breakdown

291
Spare wheelProcedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
The
 
wheel
 
chock   2 as well as the wheelbrace
extension
 6

 
are   stowed   under   the   right   hand  
b

oot
 
sill
 
trim.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
Access to the tools*2. Wheel  chock   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   lowering/raising   the   spare   wheel  
c

a r r i e r.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of   your  
han

d.
List of tools*
All of these tools are specific to your vehicle
and  can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts. *
  
D
epending   on   version.   A   complete   set   of   tools  
i

s   provided   with   the   spare   wheel.
The
 
other
 
tools,
 
the
 
jack
 
3
 
and
 
the
 
tool
 
for
 r
emoving
 
the
 
wheel
 
bolt
 
covers
 
on
 
alloy
 
w

heels

4 ,
 
are
 
stowed
 
in
 
a
 
box
 
attached
 
to
 
the
 
spar

e
 w

heel.
The
 
assembly
 
is
 
secured
 
under
 
the
 
vehicle
 
in
 
a

 
carrier.
8
In the event of a breakdown

295
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd   the   P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   the   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle  
s

upported   by   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   wheel   bolt   cover(s)   using   the  t
ool 4   (depending   on   equipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(

if fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
* Position P
 
for
 
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   any   purpose   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.F
 
P
lace   the   foot   of   the   jack   3   on   the   ground  
a

nd   check   that   it   is   directly   below   the  
f

ront A or rear B   jacking   point   provided   on  
t

he   underbody,   whichever   is   closest   to   the  w
heel   to   be   changed.
Ensure   that   the   jack   is   stable.   If   the  
g

round   is   slippery   or   loose,   the   jack  
m

ay   slip   or   drop   -   Risk   of   injury!
Ensure
  that   the   jack   is   positioned   only  
a

t   one   of   the   jacking   points   A or B
under
  the   vehicle,   making   sure   that   the  
v

ehicle's   contact   sur face   is   centred   on  
t

he   head   of   the   jack.   Other wise   there   is  
a

  risk   of   damage   to   the   vehicle   and/or   of  
t

he   jack   dropping   -   Risk   of   injury!
8
In the event of a breakdown

311
Fusebox 2Fuse N° Rating Functions
F7 10 ABoot
  12V   socket.
F8 20 ARear
  wiper.
F10 30 ALocks.
F17 5 AInstrument
  panel.
F18 5 AAutomatic
  gearbox   gear   selector.
F21 3 ASTART/STOP
  button.
F22 3 ARain
  and   sunshine   sensor,   windscreen   camera.
F24 5 AParking
  sensors,   panoramic   visual   aid.
F27 5 AAutomatic
  gearbox.
F29 20 AAudio
  and   telematic   systems.
F32 15 A12
  V   sockets.
F35 5 AHeadlamp
  beam   height   adjustment,   heated   rear   screen,   radar.
F36 5 ALighting:
  glove   box,   central   storage,   reading   lamps,   courtesy  
lam

ps.
8
In the event of a breakdown

317
To w i n g
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F
 
l
ift   the   floor   and   remove   it,
F
 
r
emove   the   towing   eye   from   its   housing.
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another   vehicle   using   the   towing   eye.
Access to the tools
8
In the event of a breakdown

318
Towing another vehicle
F On  the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
F
 O
n
 
the
 
front
 
bumper,
 
unclip
 
the
 
cover
 
by
 p
ressing
 
on
 
the
 
left.
F
 
S

crew
 
the
 
towing
 
eye
 
in
 
fully.
F
 
I

nstall
 
the
 
towing
 
bar.
F
 
P

lace
 
the
 
gear
 
lever
 
in
 
neutral
 
(position
 
N
with
 
an
 
automatic
 
gearbox).
Towing your vehicle
Failure to observe this instruction could r esult   in   damage   to   certain   components  
(

braking,   transmission...)   and   the  
a

bsence   of   braking   assistance   the   next  
t

ime   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key  
i

n
  the   ignition   one   notch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
In the event of a breakdown

320
Petrol enginePureTech 110 S&SPureTech 130 S&S
Gearbox Manual
 (

6-speed)Manual
 (

6-speed)EAT6
  automatic   (6 -speed)
Model code 3D
3D...
 3

E...
 3
A...3D...
 3

E...
 3
A...
HNX...
M/1S
  -   M/2SMHNY…
M/1S
  -   M/2SMHNY…
T/1S
  -   T/2S
Cubic capacity (cc) 1
  199
Bore
  x   stroke   (mm) 75
  x   90.5
Max
  power*:   EU   standard   (kW) 96
Max
  power   engine   speed   (rpm) 5
  500
Max
  torque:   EU   standard   (Nm) 230
Max
  torque   engine   speed   (rpm) 1
  750
Fuel Unleaded
Catalytic converter yes
Engine
  oil   capacity,   with   filter   replacement  
(in litres) 4.25
Petrol engines and gearboxes
3D...: 
CITROËN   C4   Picasso   (5 -seat). 3A...:  CITROËN   Grand   C4   Picasso   (7-seat).
3E...:  CITROËN   Grand   C4   Picasso   (5 -seat).
* 
 
T
he   maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive
 1

999/99/EC).
Technical data

321
3D...: CITROËN   C4   Picasso   (5 -seat). 3A...:  CITROËN   Grand   C4   Picasso   (7-seat).
3E...:  CITROËN   Grand   C4   Picasso   (5 -seat).
* 
 
T
he   maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive
 1

999/99/EC).
Petrol engine
THP 150 / 160THP 165 S&S
Gearbox EAT6   automatic   (6 -speed)
EAT6   automatic   (6 -speed)
Model code 3D...
 3
E...
 3
A...
3D...
 3
E...
 3
A...
5GX   -   5GY...
A-A/1-A/2-A/D-
 A/
1D-
 A/
2D-Y-Y/1-Y/2
5G Z T/S
Cubic capacity (cc) 1   598
1   598
Bore   x   stroke   (mm)
77   x   85.8
77   x   85.8
Max   power*:   EU   standard   (kW)
110   /   121
121
Max   power   engine   speed   (rpm)
6   000
6   000
Max   torque:   EU   standard   (Nm)
240 240
Max   torque   engine   speed   (rpm)
1   400
1   400
Fuel UnleadedUnleaded
Catalytic converter yesyes
Engine   oil   capacity   (in   litres)  
(with   filter   replacement)
4.25
4.25
9
Technical data