43
Remaining range between 350 and 1500 miles
(600 and 2 400 km)
When switching on the ignition, the AdBlue w arning lamp comes on for a few seconds,
a
ccompanied by an audible signal and the
d
isplay of a message (e.g. "Top-up AdBlue :
S
tarting impossible in 900 miles") indicating
t
he remaining range expressed in miles or
k
ilometres.
When
driving, the message is displayed every
2
00 miles (300 km) until the fluid level has been
t
opped-up.
Go
to a CITROËN dealer or a qualified
w
orkshop to have the AdBlue
® fluid topped-up.
Y
ou
can
also
top-up
the
fluid
yourself.
For
m
ore
i
nformation
o
n
A
dBlue
® and the SCR
system,
and
in
particular
on
topping-up, refer
t
o
the
corresponding
section. Remaining range between 0 and 350 miles
(0 and 600 km)
When
switching on the ignition, the SERVICE
w
arning lamp comes on and the AdBlue
w
arning lamp flashes, accompanied by an
a
udible signal and the display of a message
(
e.g. "Top-up AdBlue: Starting impossible in
3
50 miles") indicating the remaining range
e
xpressed in miles or kilometres.
When driving, the message is displayed every
3
0 seconds until the fluid level has been
t
opped-up.
Go to a CITROËN dealer or a qualified
w
orkshop to have the AdBlue
® fluid topped-up.
Y
ou
can
also
top-up
the
fluid
yourself.
Other wise you will not be able to restart your
engine. Breakdown related to a lack of AdBlue
®
When switching on the ignition, the SERVICE w
arning lamp comes on and the AdBlue
w
arning lamp flashes, accompanied by an
a
udible signal and the display of a message
(
e.g. "Top-up AdBlue : Starting impossible").
The
Ad
Blue
® tank is empty: t he s ystem r equired b
y
regulations prevents engine starting.
To
be
able to start the engine,
w
e
recommend that you call on
a
CITROËN dealer or a qualified
w
orkshop for the top-up required.
If
you
carry out the top-up yourself, it
i
s
essential to add at least 3.8 litres of
Ad
Blue
® to the tank.
F
or m
ore i
nformation o
n A
dBlue® and the SCR
system,
and
in
particular
on
topping-up, refer
t
o
the
corresponding
section.
1
Instruments
44
In the event of a fault with the SCR emissions control system
In the event of the detection of a fault
The AdBlue, SERVICE and diagnostic
w
arning lamps come on, accompanied by an
a
udible signal and the display of the message
"
Emissions
f
ault".
The
alert is triggered when driving when the
f
ault is detected for the first time, then when
s
witching on the ignition for subsequent
j
ourneys, while the fault persists. During an authorised driving phase (between
650 miles and 0 miles) (1 100 km and 0 km)
If
a fault with the SCR system is confirmed
(
after 30 miles (50 km) covered with the
p
ermanent display of the message signalling
a
fault), the SERVICE and engine diagnostic
w
arning lamps come on and the AdBlue
w
arning lamp flashes, accompanied by an
a
udible signal and the display of a message
(
e.g. "Emissions fault: Starting prevented in
1
50 miles") indicating the remaining range
e
xpressed in miles or kilometres.
While
driving, the message is displayed every
3
0 seconds while the fault with the SCR system
p
ersists.
The alert is repeated when switching on the ignition.You should go to a CITROËN dealer or a qualified workshop as soon as possible.
Other wise, you will not be able to restart your
engine.
A
system
that
prevents
engine
starting
is
activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions
c
ontrol
system.
Have
the
system
checked
by
a CITROËN dealer or a qualified workshop as soon as possible.
If
it
is
a
temporary
fault,
the
alert
d
isappears
during
the
next
journey,
a
fter
self-diagnosis
of
the
SCR
system. Starting prevented
Every
time the ignition is switched on, the
S
ERVICE and engine diagnostic warning
l
amps come on and the AdBlue warning lamp
f
lashes, accompanied by an audible signal and
t
he display of the message "Emissions fault:
St
arting
p
revented".
You have exceeded the authorised
d
riving limit: the starting prevention
s
ystem inhibits engine starting.
To be able to start the engine, you must
c
all on a CITROËN dealer or a qualified w
orkshop.
Instruments
45
Distance recorders
The total and trip distances are displayed for thirty seconds when the ignition is switched off,
w
hen the driver's door is opened and when the
v
ehicle is locked or unlocked.
When
travelling abroad, you may
h
ave to change the units of distance:
t
he display of road speed must be in
t
he official units (miles or km) for the
c
ountry. The change of units is done via
t
he screen configuration menu, with the
v
ehicle stationary.
Trip distance recorder
It measures the distance travelled since it was reset to zero by the driver.
F
W
ith the ignition on, press the button until
z
eros appear.
Total distance recorder
It measures the total distance travelled by the vehicle since its first registration.
1
Instruments
47
When driving at night, this function allows certain displays in the instrument panel to be s
witched off to avoid visual fatigue for the driver.
The
essential information, such as the speed of
t
he vehicle or the cruise control or speed limiter
i
ndications remains displayed in the instrument
pan
el.
Using the steering mounted
control
F With the vehicle lighting on, press this b
utton again to activate the black panel.
F
P
ress this button again to deactivate it.
Black screen (touch screen
tablet)
Black panel (comfortable
night driving display)
F In the Configuration
menu, select "Dark ". T
he screen of the touch screen tablet goes off.
F Press the screen again (anywhere on its s
ur face) to switch it on again.
1
Instruments
48
Trip computer
T ype 1 instrument panel
System that gives you information on the journey in progress (range, fuel consumption…).
Information display in the touch screen tablet
Permanent display:
F Sel ect the " Trip computer " in the
Applications
menu.
The
trip computer information is displayed in
t
abs.
F
P
ress one of the buttons to display the
de
sired
t
ab. The
current fuel consumption tab with:
-
t
he range,
-
t
he current fuel consumption,
-
t
he Stop & Start time counter.
The trip "1"
tab with:
-
t
he distance travelled,
-
t
he average fuel consumption,
-
t
he average speed,
f
or the first trip.
The trip "2" tab with:
-
t
he distance travelled,
-
t
he average fuel consumption,
-
t
he average speed,
f
or the second trip.
Trip reset
F When the desired trip is displayed, press t
he reset button or on the end of the wiper
c
ontrol stalk.
Tr i p s "1"
and "2"
are independent but their use
i
s identical.
For
example, trip "1"
can be used for daily
f
igures, and trip "2"
for monthly figures.
The
information
is
accessible
in
the
Driving
menu.
Temporary
display
in
a
new
window:
F
P
ress
the
end
of
the
wiper
control
stalk
for
a
ccess
to
the
information
and
display
the
d
ifferent
tabs.
Instruments
49
Trip computer
T ype 2 instrument panel
Information display in the instrument panel
F Press the button on the end of the wiper
control stalk to display the various tabs in
s
uccession. -
T
he current information tab with:
●
t
he range,
●
t
he current fuel consumption,
●
t
he Stop & Start time counter.
-
T
rip "1"
w
ith:
●
t
he average speed,
●
t
he average fuel consumption,
● t he distance travelled, f
or the first trip.
-
T
rip "2"
w
ith:
●
t
he average speed,
●
t
he average fuel consumption,
●
t
he distance travelled,
f
or the second trip.
Trip reset
F When the trip required is displayed, press t
he control for more than two seconds
o
r use the left hand thumbwheel of the
s
teering mounted controls.
Tr i p s "1"
and "2"
are independent but their use
i
s identical.
For
example, trip "1"
can be used for daily
f
igures, and trip "2"
for monthly figures.
For
all
other
display
modes,
pressing
the
end
o
f
the
wiper
stalk
displays
this
information
in
a
n
ew
window.
The
display
of
trip
computer
information
is
p
ermanent
when
you
select
the
"Dials"
or
"
Personal"
display
mode.
1
Instruments
50
Trip computer
Range
(miles or km)
T he distance which can still be
t
ravelled with the fuel remaining in
t
he tank (related to the average fuel
c
onsumption over the last few miles
(
kilometres)
t
ravelled).
This
value may vary following a change
i
n
the style of driving or the relief,
r
esulting in a significant change in the
c
urrent fuel consumption.
When
the
range falls below 20 miles (30 km),
d
ashes
are displayed. After filling with at least
5
litres
of
fuel, the range is recalculated and is
d
isplayed
when it exceeds 60 miles (100 km).
If
dashes are displayed continuously
w
hile driving in place of the digits,
c
ontact a CITROËN dealer or a
q
ualified
w
orkshop. This
function is only displayed from
2
0 mph (30 km/h).
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated since the last trip reset.
Average speed
(mph or km/h)
C alculated since the last trip reset.
Distance travelled
(miles or km)
C alculated since the last trip reset.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I
f
your
vehicle is fitted with Stop & Start, a time
c
ounter
calculates the time spent in STOP
m
ode
during a journey.
It
resets
to zero every time the ignition is
s
witched
on.
A few definitions
Instruments
58
Remote control problem -
reinitialisationChanging the battery
Following disconnection of the vehicle battery, r
eplacement of the remote control battery or
i
n the event of a remote control malfunction,
y
ou can no longer unlock, lock or locate
y
our vehicle.
F
P
lace the mechanical key (integral with
t
he remote control) in the lock to unlock
y
our vehicle.
F
P
lace the electronic key in the reader.
F
S
witch on the ignition by pressing START/
S T O P.
The
electronic key is fully operational again.
If
the problem persists, contact a CITROËN
d
ealer or a qualified workshop as soon as
p
ossible. Do
not throw the remote control
b
atteries away, they contain metals
w
hich are harmful to the environment.
Take
them to an approved collection
po
int.
Battery
ref.: CR2032 / 3 volts.
Battery replacement is signalled by the display
o
f a message.
F
U
nclip the cover using a small screwdriver
a
t the cut-out.
F
L
ift off the cover.
F
R
emove the flat battery from its location.
F
F
it the new battery into its location
observing
the original direction of fitment.
F
C
lip the cover onto the casing.
Access