2016 Citroen DS5 RHD Owner's Manual

1
18
19
1
21
20
22
23
79 Audio and Telematics


Level 1

Level 2

Level 3

Comments


Settings



Secondary page



Setting
the time- date

Date
Date
Enter the date and select the date format.
Date format:

Time
Time Set the time.
Time Zone Define the time zone.
Time format: Select the time format: 12h / 24h.
Synchronisation with
GPS (UTC): Activate or deactivate synchronisation with GPS.

Confirm
Save the settings.

Settings



Secondary page



Setting of the
profiles

Profile 1

Enter settings for the profiles.
Profile 2


Profile 3


Common profile


Confirm
Save the settings.

4
2
5
6
7
8
1
20

Press on Settings
to display the
primary page.






Profile settings

Audio settings


Press on Settings
to display the
primary page.

Select " Audio settings
".

Select " Ambience
"

Or

" Position
"

Or

" Sound
"

Or

" Voice
"

Or

" Ringtone
".

On-board audio: Arkamys
©
Sound
Staging optimises the distribution of
sound in the passenger compartment.

The settings for " Position
" (All
passengers, Driver and Front only) are
common to all sources.

Activate or Deactivate " Touch tones
",
" Volume linked to speed
" and
" Auxiliary input
".
The sound distribution (or spatialisation
with the Arkamys
© system) is audio
processing that allows the quality of the
sound to be adapted according to the
number of passengers in the vehicle.
Available only with the 6 -speaker
configuration.

The audio Ambience
settings
(6 ambiences available) as well as the
Bass
, Medium
and Tr e b l e
settings
are different and independent for each
sound source.
Activate or Deactivate " Loudness
".

Press on " Confirm
" to save the
settings.
Press on " Confirm
".
Press on the " OPTIONS
" button to
go to the secondary page.

Select " Profile 1
", " Profile 2
",
" Profile 3
" or " Common profile
".
Select " Setting of the profiles
".

Press on this button to enter a name
for the profile using the virtual keypad
As a safety measure and because it
requires the sustained attention of the
driver, chnages to settings must only be
done with the vehicle stationary
.

4
2
5
6
7
8
81 Audio and Telematics


Select a " Profile
" (1 or 2 or 3) to
associate the " Audio settings
" with
it.

Select " Audio settings
".

Select " Ambience
".

Or

" Distribution
".

Or

" Sound
".

Or

" Voice
".

Or

" Ringtone
".
The location for the photograph is
square; the system deforms the original
photograph if in another format.
Initialisation of the profile selected
activates the English language by default.

Press on " Confirm
" to save the
settings.

Press on " Confirm
" to accept the
transfer of the photograph.

Press on " Confirm
" again to save the
settings.
Press on this button to add a
photograph to the profile.

Insert a USB memory stick containing
the photograph in the USB port.
Select the photograph.
Press on this button to initialise the
profile selected.

111
11
12
13
9
101

Press on Settings
to display the
primary page.
Press Settings
to display the primary
page.
Press on Settings
to display the
primary page.

Press on the " OPTIONS
" button to
go to the secondary page.
Press the " OPTIONS
" button to go to
the secondary page.
Press on the " OPTIONS
" button to
go to the secondary page.

Select " System settings
".

Select " Screen configuration
".

Select " Units
" to change the units
for distance, fuel consumption and
temperature.
Select " Languages
" to change the
language.


Activate or deactivatre " Automatic
scrolling
".

Adjust the brightness of the screen.
Select " Factor y settings
" to return
to the initial settings.

Select " System info
" to display the
versions of the different modules
installed in the system.







Modifying system settings


Returning the system to factory settings
activates the English language by
default.
Select " Animation
".

Select " Brightness
".


Select the language


Press on Settings
to display the
primary page.

Press on the " OPTIONS
" button to
go to the secondary page.

Select " Setting the time- date
".










Setting the date

1
18
19
3
83 Audio and Telematics


Press on Settings
to display the
primary page.

Press on the " OPTIONS
" button to
go to the secondary page.
Select " Date
".

Select " Time
".
Select " Setting the time- date
".

Every time the color scheme is
changed, the system restarts,
temporarily displaying a black screen.

Adjustment of the time and date is only
available if synchronisation with GPS is
deactivated.
The change between winter and
summer time is done by changing the
time zone.

The system does not automatically
manage the change between winter
and summer time (depending on
country).


As a safety measure, the procedure
for changing the color scheme is only
possible with the vehicle stationary.

Press on Settings
to display the
primary page.

Select " Color schemes
".

Select a color scheme in the list then
" Confirm
".


Color schemes









Setting the time


Press on this button to define the
date.

Press on this button to adjust the
time using the virtual keypad.
Press on " Confirm
".
Press on " Confirm
".

Press on " Confirm
".

Press on this button to define the
time zone.
Select the display format of the date.

Select the display format for the time
(12h / 24h).

Activate or deactivate
synchronisation with GPS (UTC).

The following table groups together the answers to the most frequently asked questions concerning your audio system.



QUESTION



ANSWER



SOLUTION


The route calculation is
not successful. The route settings may conflict with the current location (exclusion
of toll roads on a toll motor way). Check the route settings in the "Navigation"
menu.
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The audible warning of
"Danger areas" does not
work. The audible warning is not active. Activate audible warnings (without the possibility
of adjusting the volume) in the "Navigation"
menu.
The system does not
suggest a detour around
an incident on the route. The guidance criteria do not take account of TMC messages. Select setting for the "Traffic info" function in
the list of route settings (Without, Manual or
Automatic).
I receive a "Danger area"
alert which is not on my
route. Other than guidance, the system announces all "Danger areas"
positioned in a cone located in front of the vehicle. It may provide
an alert for "Danger areas" located on nearby or parallel roads. Zoom in on the map to view the exact position of the
"Danger areas". Select "On the route" to no longer
receive alerts other than navigation instructions or to
reduce the time for the announcement.
Frequently asked questions


Navigation

85 Audio and Telematics



QUESTION



ANSWER



SOLUTION


Certain traffic jams along
the route are not indicated
in real time. On starting, it is several minutes before the system begins to
receive the traffic information. Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).
In certain countries, only major routes (motor ways...) are listed for
the traffic information. This phenomenon is normal. The system is
dependent on the traffic information available.
The altitude is not
displayed. On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly. Wait until the system has started up completely
so that there is GPS coverage by at least
4 satellites.
Depending on the geographical environment (tunnel...) or the
weather, the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.

Radio



QUESTION



ANSWER



SOLUTION


The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling. Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more power ful transmitter in
the geographical area.
The environment (hills, buildings, tunnels, basement car parks...)
block reception, including in RDS mode. This phenomenon is normal and does not
indicate a fault with the audio system.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park). Have the aerial checked by a franchised dealer.
I cannot find some radio
stations in the list of
stations received. The station is not received or its name has changed in the list. Press on the "Update list" button in the "Radio
stations" secondary menu.
Some radio stations send other information in place of their name
(the title of the song for example).
The system interprets this information as the name of the station.
The name of the radio
station changes.