219
DS5_en_Chap08_info-pratiques_ed02-2015
Changing a fuse
The fuse extraction tweezer is fitted to the back
of the dashboard fusebox cover.
For access to it:
F
re
move the cover completely and turn it
ove r,
F
re
move the tweezer.
Access to tooling
Before changing a fuse, it is necessary to:
F identify the cause of the failure and
correct it,
F
sw
itch off all electrical consumers,
F
im
mobilise the vehicle and switch off the
ignition,
F
id
entify the failed fuse using the allocation
tables and diagrams presented on the
following pages.
changing a fuse
Good Failed
To remove or fit a fuse, it is essential to:
F
us
e the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F
al
ways replace the failed fuse with a fuse
of the same rating (same colour); a fuse of
different rating could cause a fault (risk of
f i r e).
The replacement of a fuse not
mentioned in the tables below could
cause a serious malfunction of your
vehicle. Contact a CITROËN dealer or a
qualified workshop.
If the fault recurs after replacing a fuse, have
the electrical system checked by a CITROËN
dealer or a qualified workshop. Tw e e z e r
Practical information
