2016 Citroen DS5 transmission

DS5_en_Chap08_info-pratiques_ed02-2015
Towing your vehicleTowing another vehicle
F On the front bumper, unclip the cover
b
y pressing at the top to disengage the
securing lugs.
F
Sc

rew the towing eye in fully.
F
In

stall the towing arm. F On t
he rear bumper, unclip the cover by
levering at the left with the point of the
towing eye.
F
Sc

rew the towing eye in fully.
F
In

stall the towing arm.
F
Sw

itch on the hazard warning lamps on
both vehicles.
F
Mov

e off gently and drive at low speed and
for a short distance only.
F
Pl

ace the gear lever in neutral
(position N with an automatic
gearbox).
Fa
ilure to follow this advice could
result in damage to certain systems
(braking, transmission...) and the
absence of braking assistance the
next time the engine is started.
F Un lock the steering and release the
parking brake.
F
Sw

itch on the hazard warning lamps on
both vehicles.
F
Mov

e off gently and drive at low speed and
for a short distance only.

DS5_en_Chap11d_RD5_ed02-2015
RdS
Select "RdS" a nd confirm to save.
" RdS " i
s displayed in the screen.
When the radio is displayed on the
screen, press OK
to display the
contextual menu.
Select or deselect categories to
activate or deactivate the reception of
the corresponding messages. Make a long press on TA I N FO to
display the list of categories.
Press TA I N FO
to activate or
deactivate the reception of traffic
messages.
RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do not cover 100
% o

f the territory. This
explains the loss of reception of the station
during a journey.
Receiving TA messages
The TA (Traffic Announcement)
function gives priority to TA alert
messages. To operate, this function
needs good reception of a radio station
transmitting this type of message.
When a traffic report is transmitted,
the current audio source (Radio, CD,
USB,
.

..) is interrupted automatically to
play the TA message. Normal playback
of the audio source resumes at the end
of the transmission of the message. The INFO function gives priority to
TA alert messages. To be active, this
function needs good reception of a
radio station that transmits this type
of message. When a message is
transmitted, the current audio source
(Radio, CD, USB, ...) is interrupted
automatically to receive the INFO
message. Normal play resumes at the
end of the message transmission.
Receiving INFO messages

291
DS5_en_Chap11d_RD5_ed02-2015
Press the SOURcE or SRc bu tton
several times in succession and
select " AUX".
First adjust the volume on your portable device.
Then adjust the volume of the audio
system.
In certain cases, playing of the
audio files must be initiated from the
telephone.
Do not connect a device to the USB
port and to the auxiliary Jack socket at
the same time.
Auxiliary socket (AUX)
The auxiliary Jack socket permits the
connection of a portable non-mass storage
device or an Apple
® player if not recognised by
the USB port.
Connect the portable device to the auxiliary
Jack socket using a suitable cable (not
supplied). The display and management of controls is on
the portable device.
Activate the streaming source by
pressing
SOUR
cE or

SR
c. Co
ntrol
of playback is via the audio system.
The contextual information can be
displayed in the screen. Pair/connect the telephone: see the
"USING THE TELEPHONE" section.
Streaming - Playing audio
files via Bluetooth
depending on the compatibility of the phone
Streaming allows music files on a telephone to
be heard via the vehicle's speakers.
The telephone must support the appropriate
Bluetooth profiles (Profiles A2DP / AVRCP).
The audio quality depends on the quality of the
transmission from the telephone.
Audio and Telematics

11
3133
19 Audio and Telematics


Select the message from
the list offered.

Select the magnifying glasses to
have voice information.


Setting fi lters


Press on Navigation
to display the
primary page.

Press on the secondary page.

Select " Settings
".

Select " Traffic options
".

Select:


- " Be advised of new messages
",

- " Speak messages
".
Then enter the filter radius.

Select " Confirm
".

We recommend a filter radius of:


- 12 miles (20 km) in urban areas,

- 30 miles (50 km) on motor ways.


TMC (Traffic Message Channel)
messages on GPS-Navigation contain
traffic information transmitted in real
time.



The TA (Traffic Announcement)
function gives priority to TA alert
messages. To operate, this function
needs good reception of a radio station
transmitting this type of message.
When a traffic report is transmitted,
the current audio source is interrupted
automatically to play the TA message.
Normal playback of the audio source
resumes at the end of the transmission
of the message.









Receiving TA messages


Press on Navigation
to display the
primary page.

Press on the secondary page.

Select " Settings
".

Select " Voice
".

Activate / Deactivate " Tr a f f i c
(TA)
".