2016 Citroen C4 PICASSO display

143
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Invalid value in manual operationThis   symbol   is   displayed   if   a   gear   is  
n

ot   engaged   correctly   (gear   selector  
b

etween   two   positions).
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 c

hanges
 
using
 
the
 
 "
+" and " -"
 
steering
 
mounted
 c

ontrol
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 
the
 i

nstruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
s

uch
 
a

s
 
ov

ertaking
 
a

nother
 
v

ehicle
 
o

r
 a
pproaching
 
a
 
bend.
After a few moments with no action on the
control
 
paddles,
 
the
 
gearbox
 
manages
 
the
 
g

ears
 
automatically
 
again.
Temporary manual control of the
gears
Manual mode
D and the gear engaged are displayed in the in strument pan el.
The
  gearbox   operates   in   auto-active  
m

ode,   without   any   action   from   the   driver.   It  
c

ontinuously   selects   the   most   appropriate   gear  
a

ccording   to   the   following   conditions:
-
o

ptimisation of fuel consumption,
-
 
d
riving   style,
-

r
elief of the road,
-
 
v
ehicle   load.
Automated mode
F Select position D .
For
 
maximum   acceleration,   without   touching  
t

he
 
gear
 
selector,   press   the   accelerator   fully  
d

own
 
(kick   down).   The   gearbox   changes   down  
a

utomatically   and   maintains   the   gear   selected  
u

ntil
 
the
 
maximum   engine   speed   is   reached.
When
 
braking,   the   gearbox   changes   down  
a

utomatically   for   more   effective   engine   braking.
When
 
you   take   your   foot   off   the   accelerator  
p

edal
 
suddenly,   the   gearbox   does   not   change  
u

p,
 
so
 
as
 
to   improve   safety. F
Sel ect position M.
F

U
se the "+" and " -"
  steering   mounted  
c

ontrol   paddles   to   change   gear.
The
  gears   engaged   are   displayed   successively  
i

n   the   instrument   panel.
When stationary or at very low speed, the
gearbox
  automatically   engages   1st
 g
e a r.
In manual mode, it is not necessary to release
the
  accelerator   pedal   when   changing   gear.
The
  change   from   one   gear   to   another   is   only  
e

ffected if the conditions of vehicle speed and
engine
  speed   allow;   other wise   the   automatic  
l

aws   of   operation   are   imposed   temporarily.
If
  the   engine   speed   is   too   high   or   too   low,  
t

he   display   of   the   gear   selected   flashes   for   a  
f

ew   seconds,   then   the   new   gear   engaged   is  
d

isplayed.It
  is   possible   to   change   mode   at   any  
t

ime,   by   moving   the   gear   selector  
f

rom D to M   or   the   other   way   round.
4
Driving

145
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   or   more   gears.
You
  can   follow   this   instruction   without   going  
t

hrough   the   intermediate   gears..
Gear shift indicator
System which reduces fuel consumption by recommending the most suitable gear. T he   system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (gradient,   load, ...)  
a

nd the demands of the driver (power,
acceleration,
  braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear.
The information appears in the instrument
panel
  in   the   form   of   an   arrow.
On
  vehicles   with   manual   gearbox,   the   arrow  
m

ay be accompanied by the recommended
g e a r.
The gear engagement recommendations
must not be considered compulsory.
This is because the configuration of the
road, traffic density and safety remain
impor tant factors in the choice of the best
g e a r.
The
  gear   shift   indicator   system   does   not  
r

eplace   the   need   for   vigilance   on   the   part   of   the  
d

river.
With
  an   automatic   gearbox,   the   system   is   only   active   in   manual   mode.
On
  BlueHDi   Diesel   135   and   150   versions   with  
m

anual   gearbox,   in   certain   driving   conditions  
t

he   system   may   suggest   changing   into   neutral  
s

o   that   the   engine   can   go   into   standby   (STOP  
m

ode   with   Stop   &   Start).   In   this   case,   N is
displayed
  in   the   instrument   panel.Example:
This
  function   cannot   be   deactivated.
-
 
Y
ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
4
Driving

148
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Operating fault
Have it checked by a CITROËN dealer or a qualified w orkshop.
In the event of a fault in STOP mode, the vehicle
may
  stall.
All
  of   the   instrument   panel   warning   lamps   come on.
Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever at position N and put your foot on
the
  brake   pedal.
It is then necessary to switch off the ignition and start   the   engine   again   using   the   "START/STOP" b

utton.
In the event of a fault with the system,
this indicator lamp flashes for a few
moments then comes on continuously,
accompanied
  by   a   message.
Opening the bonnet
Before
 
doing
 
anything
 
under
 
the
 
b

onnet, deactivate the Stop & Start
system
 
to
 
avoid
 
the
 
risk
 
of
 
injury
 
related
 
t

o
 
an
 
automatic
 
change
 
to
 
START
 
m

ode.
Driving on flooded roads
Before
 
driving
 
through
 
a
 
flooded
 
road,
 
i

t
 
is
 
strongly
 
recommended
 
that
 
you
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system.
For more information on Driving
advice , particularly on flooded roads,
refer
 
to
 
the
 
corresponding
 
section. The Stop & Start system requires a
battery
  of   advanced   technology   and  
sp

ecial
 c
haracteristics.
All
 
work   on   this   type   of   battery   must  
o

nly be done by a CITROËN dealer
or
 
a
  qualified   workshop.
For more information on the
12 V
batter y ,
  refer   to   the   corresponding  
s

ection.
Driving

150
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Speed limit recognition
This system allows the speed limit detected by
the camera to be displayed in the instrument
panel.
Specific speed limits, such as those for heavy
goods
  vehicles,   are   not   displayed.
The display of the speed limit in the instrument
panel
  is   updated   as   you   pass   a   speed   limit   sign  
i

ntended   for   cars   (light   vehicles).
The units for the speed limits (mph or
km/h)
  depend   on   the   country   you   are  
d

riving   in.
It
  should   be   taken   into   account   so   that  
y

ou   observe   the   speed   limit.
For the system to operate correctly
when
  you   change   country,   the   units   for  
s

peed in the instrument panel must be
those
  for   the   country   you   are   driving   in. The
  automatic   reading   of   road   signs   is   a  
d

riving   assistance   system   and   does   not  
a

lways   display   speed   limits   correctly.
The
  speed   limit   signs   present   on   the  
r

oad   always   take   priority   over   the  
d

isplay   by   the   system.
The system cannot in any
circumstances replace the need for
vigilance
  on   the   part   of   the   driver.
The
  driver   must   observe   the   driving  
r

egulations   and   must   adapt   the   speed  
o

f the vehicle to suit the weather and
traffic.
It is possible for the system to not
display the speed limit if it does not
detect
  a   speed   limit   sign   within   a   preset  
p

eriod.
The
  system   is   designed   to   detect   signs  
t

hat conform to the Vienna Convention
on
  road   signs.
To maintain correct operation of the
system:
  regularly   clean   the   area   in   front  
o

f   the   camera.Principles
Using a camera at the top of the windscreen, this system detects and reads speed limit and
end
  of   speed   limit   signs.
The
  system   also   takes   account   of   information  
o

n   speed   limits   from   the   navigation   system  
ma

pping.
Driving

151
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Display in the instrument panel
1. Indication  of   the   speed   limit.
or
2.
 I

ndication   of   the   end   of   the   speed   limit.
Display of the speed
The system is active but is not detecting speed limit in formation.
On detection of speed limit information, the
system
  displays   the   value. The
  driver   can,   if   desired,   adjust   the  s
peed   of   the   vehicle   according   to   the  
i

nformation   given   by   the   system.
The system is activated or deactivated in the
Driving
 

menu   of   the   touch   screen   tablet.
Select the " Settings" tab, then " Driving aids "
and " Recommended speed display ".
Activation / Deactivation
It is necessary to update your
navigation
  mapping   regularly   in   order   to  
r

eceive accurate information on speed
limits
  from   the   system.
4
Driving

152
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Memorising the speed setting
This memorisation is in addition to the display
of Speed limit recognition .
The driver can choose to adapt the speed
setting
  to   the   speed   limit   suggested,   by  
p

ressing   the   memorisation   button   at   the   speed  
l

imiter controls, with the standard cruise
control, the dynamic cruise control or the
dynamic
  cruise   control   with   Stop   function.
This
  speed   setting   then   replaces   the   previous  
s

peed  
s
etting  
f
or  
t
he  
s
peed  
l
imiter  
a
nd/or  
c
ruise  
c

ontrol. For more information on the Speed
limiter, Cruise control , Dynamic
cruise control or Dynamic cruise
control with Stop function , refer to
the
  corresponding   sections.
Steering mounted controls
1. Select  speed   limiter/cruise   control   mode.
2. M emorise   a   speed   setting.
Operating limits
The legislation on speed limits is specific to each   country.
The
  system   does   not   take   account   of   reduced  
s

peed   limits   in   the   following   cases:
-

p
oor weather (rain, snow),
-
a

tmospheric pollution,
-

t
railer, caravan,
-
 
d
riving   with   a   space-saver   type   spare  
w

heel or snow chains fitted,
-
 
p
uncture   repair   using   the   temporary  
r

epair kit,
-
 y

oung
 d
rivers,
-
 ...
T

he   system   may   be   disrupted   or   not   work   at   all  
i

n   the   following   situations:
-
 
p
oor   visibility   (inadequate   street   lighting,  
f

alling   snow,   rain,   fog),
-

w
indscreen area ahead of the camera dirty,
misty,
  frosty,   covered   with   snow,   damaged  
o

r   masked   by   a   sticker,
-

f
ault with the camera,
-
 
o
bsolete   or   incorrect   mapping,
-
 
h
idden   road   signs   (other   vehicles,  
v

egetation,
 s
now),
-
 
s
peed   limit   signs   that   do   not   conform   to   the  
s

tandard,   are   damaged   or   distorted.
Display in the instrument panel
3. Speed  limiter   indication.
4. M emorise   the   speed.
5.
 C

urrent   speed   setting.
Driving

153
C4-Picasso-II_en_Chap04_conduite_ed01-2016
F Make  an   initial press on this
button   to   request   saving   of   the  
s

peed
 s
uggested.
F

P
ress this button again to
confirm and save the new speed
setting.
Memorising the speed
F Switch   on   the   speed   limiter/cruise   control.
Speed   limiter/cruise   control   information   is  
d

isplayed.
On
  detection   of   a   speed   limit   sign,   the   system  
d

isplays the speed limit value and offers to
make
  it   a   new   speed   setting.
" MEM "
  flashes   in   the   screen   for   a   few   seconds.
If
  the   difference   between   the   speed   setting
 a

nd   speed   displayed   by   the   recognition
 s

ystem   is   less   than   6   mph   (10   km/h),   the
 M

EM
 
symbol   is   not   displayed.After a predetermined period, the screen
returns
  to   the   current   display.
4
Driving

154
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 S

peed   limiter   setting.
Speed limiter - "LIMIT"
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace the
need
  for   vigilance   on   the   part   of   the   driver.
Once the programmed speed limit is reached, additional pressure on the accelerator pedal
has
  no   effect.
1.
 S

elect   speed   limiter   mode.
2.
 L

ower   programmed   speed.
3.
 R

aise   programmed   speed.
4.
 S

peed   limiter   on   /   pause.
5.
D

isplay the list of memorised speeds or,
 D

isplay   the   list   of   memorised   speeds.Displays in the instrument panel
Switching on the speed limiter requires
a   programmed   speed   of   at   least   20   mph  
(

30 km/h).
The speed limiter is paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease the accelerator pedal until the vehicle
returns
  to   the   programmed   speed   limit.
The
  programmed   speed   remains   in   the
 m

emory   when   the   ignition   is   switched   off.For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Driving