2016 Citroen C4 PICASSO wheel

127
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Starting-switching off the engine with Keyless Entry and Starting
F Place  the   gear   selector   lever   at   P or N for
vehicles   with   an   automatic   gearbox,   or  
n

eutral   with   a   manual   gearbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ress   the   brake   pedal   for   vehicles   with   an  
a

utomatic   gearbox,   or   fully   declutch   for  
v

ehicles   with   a   manual   gearbox.
Diesel vehicles
In temperatures below zero the
engine  will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
Starting the engine
The presence of the "Keyless Entry and
Starting"   electronic   key   in   the   recognition   zone  
i

s
 e
ssential.
It
  is   not   necessary   to   place   the   electronic   key   in  
t

he   back-up   reader.
If
  the   electronic   key   is   not   detected,  
a

  message   is   displayed.   Move   the  
e

lectronic   key   into   the   recognition   zone  
s

o   that   the   engine   can   be   started.
In the event of a problem, see "Key not
detected
  /   Back-up   starting".
F
B riefly press the "
S TA R T/
STOP "
  button   while   maintaining  
p

ressure on the pedal until the
engine
 s

tarts.
If one of the starting conditions is not met,   a   reminder   message   appears   in   the i

nstrument   panel   screen.
In some circumstances, it is necessary
to
  turn   the   steering   wheel   slightly   while  
p

ressing   the   "START/STOP " button
to
  assist   unlocking   of   the   steering;   a  
m

essage   warns   you   when   this   is   needed.
As a safety measure, never leave the
vehicle  while   the   engine   is   running.
The
 
steering
 
column
 
unlocks
 
and
 
the
 
engine
 
s

tarts
 
more
 
or
 
less
 
instantly.
See
 
the
 
advice
 
below
 
for
 
Diesel
 
versions. If
  this   warning   lamp   comes   on   after  
p

ressing   "START/STOP ", you should
hold
  the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and   do  
n

ot press the " START/STOP " button
again
  before   the   engine   starts.
4
Driving

131
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Electric parking brake
In the event of a battery failure, the
electric  parking   brake   no   longer   works.
As
  a   safety   measure,   if   the   parking  
b

rake   is   not   applied,   immobilise   the  
v

ehicle   by   engaging   a   gear   (with   a  
m

anual   gearbox)   or   placing   a   chock   at  
o

ne   of   the   wheels.
Contact a CITROËN dealer or a
qualified
 w

orkshop.
Indicator lamp
This indicator lamp comes on in the
instrument panel and in the control
lever to confirm the application of the
parking
 b
rake.
The system provides, in automatic operation,
the
 
application
 
of
 
the
 
parking
 
brake
 
on
 
s

witching
 
off
 
the
 
engine
 
and
 
release
 
as
 
the
 
v

ehicle
 
moves
 
off.
The
 
driver
 
can
 
take
 
over
 
at
 
any
 
time
 
to
 
apply
 
o

r
 
release
 
the
 
parking
 
brake,
 
by
 
operating
 
the
 
c

ontrol
 
lever:
-

b

y briefly pulling the control lever to apply
the
 
brake,
-

b

y briefly pushing the control lever, while
pressing
 
the
 
foot
 
brake,
 
to
 
release.
Automatic
 
mode
 
is
 
activated
 
by
 
default.
The
 
technology
 
adopted
 
for
 
the
 
electric
 
p

arking
 
brake
 
does
 
not
 
allow
 
the
 
fitment
 
o

f
 
wheels
 
smaller
 
than
 
16
 
inches. It
 
goes
 
off
  to   confirm   the   release   of   the   parking  
b

rake.
The indicator lamp in the control lever flashes
during
 
manual   application   or   release.
After
 
the
 
parking   brake   has   been   applied,   the  
s

imultaneous   flashing   of   the   two   indicator  
l

amps in the instrument panel and the control
lever alerts you to the need to fully secure your
vehicle
 
by
  engaging   a   gear   (with   a   manual  
g

earbox)
 
or   by   placing   the   gear   selector   in  
p

osition
 
P
  with   an   automatic   gearbox,   or   by  
f

itting
 
a
 
chock   to   one   of   the   wheels.   (E.g.  
p

arking
 
on   a   very   steep   slope   or   on   a   slope  
w

ith
 
a
 
low
  battery).
4
Driving

132
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Label on door panel
Before leaving the vehicle, check that   the   parking   brake   is   applied:   the  
in

dicator lamps in the instrument panel
and
  the   control   lever   must   be   on   fixed,  
n

ot
 f
lashing.
If
  the   parking   brake   is   not   applied,   there  
i

s   an   audible   signal   and   a   message   is  
d

isplayed   on   opening   the   driver's   door.
Never leave a child alone inside the
vehicle
  with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.When
  towing,   parking   on   a   steep   slope,  o
r if your vehicle is heavily laden,
turn
  the   wheels   towards   the   kerb   and  
e

ngage   a   gear   (with   a   manual   gearbox)  
o

r   place   the   gear   selector   at   position P
with
  an   automatic   gearbox.
For
  towing,   your   vehicle   is   approved   for  
p

arking   on   slopes   of   up   to   12%.
Manual operation
Application of the parking brake is confirmed by illumination of
the
  brake   indicator   lamp   and  
t

he P indicator lamp in the control
lever, accompanied by the display of
the
 m

essage
 "
Parking
 b
rake
 a
pplied".
Manual release
With the ignition on or the engine running, to release   the   parking   brake:
F
 
p
ress   the   brake   pedal,
F
 
w
hile   maintaining   pressure   on   the   brake  
p

edal,   briefly   push   the   control   lever.
The
  complete   release   of   the   parking   brake  
i

s   confirmed   by   the   brake   indicator   lamp   and  
t

he P indicator   lamp   in   the   control   lever   going  
o

ff,  
a
ccompanied  
b
y  
t
he  
d
isplay  
o
f  
t
he  
m
essage  
"

Parking   brake   released".
If you push the control lever without
pressing
  the   brake   pedal,   the   parking  
b

rake   will   not   be   released   and   a  
m

essage   is   displayed.
Manual application
With the vehicle stationary: briefly pull the control lever.
Confirmation of the command is signalled by flashing   of   the   indicator   lamp   in   the   control  
l

eve r.
Driving

134
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Special cases
Application of the parking brake is confirmed by illumination of
the
  brake   indicator   lamp   and  
t

he P indicator lamp in the control
lever, accompanied by the display of
the
 m

essage
 "
Parking
 b
rake
 a
pplied". The
  complete   release   of   the   parking  
b

rake   is   confirmed   by   the   brake  
i

ndicator lamp and the P indicator
lamp   in   the   control   lever   going   off,  
a

ccompanied by the display of the
message   "Parking   brake   released".
In some situations, you may need to operate
the
 
parking   brake   manually.
Immobilisation of the vehicle
with the engine running
To immobilise the vehicle with the engine r
unning,   briefly   pull   the   control   lever.
Parking the vehicle with the
brake released
In very cold conditions, it is
recommended  that   the   parking   brake  
n

ot   be   applied   (risk   of   freezing).
To
  immobilise   your   vehicle,   engage   a  
g

ear   or   fit   a   chock   to   one   of   the   wheels.
Immobilisation of the vehicle with the
parking brake released
F
 
S

witch   off   the   engine.
 I

llumination   of   the   warning   lamps   in   the  
i

nstrument panel and control lever confirm
application
  of   the   parking   brake,
F
 
S

witch   on   the   ignition   again,   without  
s

tarting   the   engine.
F
 
R

elease   the   parking   brake   manually   by  
p

ushing   the   control   lever   while   keeping  
y

our   foot   on   the   brake. F
 
S
witch   off   the   ignition.
Driving

137
C4-Picasso-II_en_Chap04_conduite_ed01-2016
SituationsConsequences
Display   of   the   message   "Parking brake fault " and these
warning
 lam

ps: The
  parking   brake   is   faulty,   the   manual   and   automatic   functions   may   not   operate.
When stationary ,
  to   immobilise   your   vehicle:
-
 
P
ull   and   hold   the   control   lever   for   about   7   to   15   seconds,   until   the   warning   lamp  
c

omes   on   in   the   instrument   panel.
If
  this   procedure   does   not   work,   you   should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   gearbox,   or   place   the   gear   selector   at   position   P
with
  an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
Display
  of   the   message   "Parking brake fault " and these
warning
 lam

ps: -
 
T
he   parking   brake   does   not   have   its   full   per formance   to   securely   hold   the   vehicle  
i

n   all   situations.
You
  should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   gearbox,   or   place   the   gear   selector   at   position P
with
  an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
The
  flashing   of   the   P   warning   lamps   on   starting   the   vehicle   indicates   that   the   parking  
b

rake   is   not   correctly   applied.
As
  soon   as   possible,   stop   the   vehicle   and   try   to   completely   release   the   parking   brake,  
u

sing   the   control   lever,   with   your   foot   on   the   brake   pedal.
Display
  of   the   message   "Battery fault "
  and   this   warning   lamp:-
 
T
he   state   of   charge   of   the   battery   is   very   low   and   requires   immobilisation   of   the  
v

ehicle   in   a   safe   place:   engage   a   gear   with   a   manual   gearbox   or   fit   a   chock   to  
o

ne   of   the   wheels.
-
 
O
nce   the   battery   is   completely   discharged,   the   controls   do   not   operate:   to  
r

elease   the   parking   brake,   call   on   a   CITROËN   dealer   or   a   qualified   workshop.
4
Driving

141
C4-Picasso-II_en_Chap04_conduite_ed01-2016
+. Control  paddle   for   changing   up,   to   the   right  o
f   the   steering   wheel.
F

P
ull the " +"
  paddle   towards   you   to   change   up.
-.
 C

ontrol   paddle   for   changing   down,   to   the  
l

eft   of   the   steering   wheel.
F

P
ull the " -"
  paddle   towards   you   to   change  
d

own.
Steering mounted control paddles
The steering mounted control paddles cannot be used to select neutral or to
select
  or   come   out   of   reverse. When
  you   move   the   gear   selector,   the   symbol  
c

orresponding   to   its   position   is   displayed   in   the  
in

strument
 pan
el.
P.
 Pa
rk.
R.
 R
everse.
N.
 N
eutral.
D.
 D
rive
 (
automatic
 ope
ration).
1 to 6.   Gears   engaged   in   manual   operation.
-.
 I
nvalid   value   in   manual   operation.
Displays in the instrument panelMoving off
F With
  your   foot   on   the   brake   pedal,   select  p
osition P or N .
F
 
S
tart   the   engine.
If P is displayed in the instrument panel,
although
  the   gear   selector   is   in   another  
p

osition,   place   the   gear   selector   in  
p

osition P   to   be   able   to   start   the   engine.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F

Sel
ect automated mode (position D ),
manual mode (position M ) or reverse
(position R ).
If you do not press the
brake
  pedal   to   come   out   of  
p

osition P,
  this   warning   lamp  
I
f these conditions are not met, there
is
  an   audible   signal   accompanied   by   a  
m

essage.
or symbol appears in the instrument
panel,
  accompanied   by   the   message  
"

Place   automatic   gearbox   in   position P",
flashing
  of   P in the instrument panel
and
  an   audible   signal.
4
Driving

155
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Switching on / Pause
F Turn thumbwheel 1 to the "LIMIT" position:  t
he speed limiter mode is selected but is
not
  switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4, if the speed displayed
is suitable (by default, the last speed
programmed).
F

Y
ou can temporarily stop the speed limiter
by
  pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You do not have to switch the speed limiter on
in
  order   to   set   the   speed.
Once the function is selected, you can modify
the
  speed   setting   by:
-
 
u
sing   buttons   2 and 3,
  raising   or   lowering  
t

he   speed   displayed   :
F

b
y successive short presses, to modify
by
  +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
4
Driving

156
C4-Picasso-II_en_Chap04_conduite_ed01-2016
On sharp acceleration, as when
descending  a   steep   hill,   the   speed  
l

imiter will not be able to prevent
the
  vehicle   from   exceeding   the  
pro

grammed
 s
peed.
The limiter is temporarily deactivated
and
  the   displayed   programmed   speed  
f

lashes.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver.
The use of mats not approved by
CITROËN may inter fere with the
operation
  of   the   speed   limiter.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-

e
nsure that the mat is secured
c o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Flashing
 
of
 
the
 
dashes
 
indicates
 
a
 
fault
 
with
 
the
 sp
eed l
imiter.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
Operating fault
F Press f irmly on the accelerator pedal,
going   beyond   the   point of resistance, to
exceed
  the   programmed   speed   limit.
The speed limiter is deactivated temporarily
and
  the   displayed   programmed   speed   flashes.
An
  audible   signal   accompanies   the   flashing  
o

f   the   programmed   speed   when   exceeding  
t

he speed is not due to an action by the driver
(steep
 h

ill...).
As
  soon   as   the   vehicle's   speed   returns   to   the  
p

rogrammed   value,   the   limiter   operates   again:  
t

he   display   of   the   programmed   speed   becomes  
s

teady   again.
Switching off Temporarily exceeding the
programmed speed
F Turn the thumbwheel 1 to the "0" p osition. T
he display of speed limiter information
disappears.
Driving