2016 Citroen C4 PICASSO Tablet

151
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Display in the instrument panel
1. Indication  of   the   speed   limit.
or
2.
 I

ndication   of   the   end   of   the   speed   limit.
Display of the speed
The system is active but is not detecting speed limit in formation.
On detection of speed limit information, the
system
  displays   the   value. The
  driver   can,   if   desired,   adjust   the  s
peed   of   the   vehicle   according   to   the  
i

nformation   given   by   the   system.
The system is activated or deactivated in the
Driving
 

menu   of   the   touch   screen   tablet.
Select the " Settings" tab, then " Driving aids "
and " Recommended speed display ".
Activation / Deactivation
It is necessary to update your
navigation
  mapping   regularly   in   order   to  
r

eceive accurate information on speed
limits
  from   the   system.
4
Driving

155
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Switching on / Pause
F Turn thumbwheel 1 to the "LIMIT" position:  t
he speed limiter mode is selected but is
not
  switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4, if the speed displayed
is suitable (by default, the last speed
programmed).
F

Y
ou can temporarily stop the speed limiter
by
  pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You do not have to switch the speed limiter on
in
  order   to   set   the   speed.
Once the function is selected, you can modify
the
  speed   setting   by:
-
 
u
sing   buttons   2 and 3,
  raising   or   lowering  
t

he   speed   displayed   :
F

b
y successive short presses, to modify
by
  +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
4
Driving

158
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn thumbwheel 1 to the "0" p osition. T
he display of information related to the
cruise
  control   disappears.
Switching on
Once the cruise control is switched on, you
can  modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F

b
y successive short presses, to modify
the
  speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F

T

urn thumbwheel 1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Pause
You can pause the cruise control at any time
by  pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

162
C4-Picasso-II_en_Chap04_conduite_ed01-2016
1. Select  cruise   control   mode.
2. U se the current speed of the vehicle as
the
  cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
U

se the current speed of the vehicle as
the
  cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
D

isplay the list of memorised speeds, or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
S

elect the inter-vehicle distance (" Close",
" Normal ", "Distant ")
For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Steering mounted controls
Switching on
The active cruise control must be selected in
the Driving  menu.
F

T
urn the thumbwheel 1 to the " CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed of your vehicle becomes the cruise
speed
  setting.
The
  cruise   control   is   activated   (ON).
By default, the inter-vehicle time is set at
2 seconds.
Other wise, the last speed value set will be used
for
  operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F b y successive short presses, to modify
by
  steps   of   +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed in the touch screen tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As a precaution, it is recommended that
you
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Driving

176
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Collision risk alert
System providing a warning to the driver that their vehicle is at risk of collision with the vehicle in front.
T he   collision   risk   alert   system   can   be   activated  
o

r   deactivated   in   the   touch   screen   tablet.
In the Driving menu, select the " Settings" tab,
then " Driving aid " and "Collision risk alert ".
This
  system   has   been   designed   to  
i

mprove   driving   safety.
It is the responsibility of the driver to
keep
  a   constant   check   on   the   state   of  
t

he traffic, to assess the relative speed
and
  distance   of   other   vehicles.
The
  collision   risk   alert   system   can   never  
r

eplace   the   need   for   vigilance   on   the  
p

art   of   the   driver.
This system operates from 20 mph
(30 km/h),
  only   when   other   vehicles   are  
r

unning   in   the   same   direction   as   your  
v

ehicle;   the   system   does   not   detect  
s

tationary   objects.   A   radar   is   fitted   at  
t

he   front   of   the   vehicle. The alert thresholds determine how you want to
be
  alerted   to   the   presence   of   a   vehicle   running  
i

n   front   of   you.
You
  can   choose   from   three   thresholds:
-
 
1
:   "Distant ".
-
 
2
:   "Normal ".
-
 
3
:   "Close ".
Setting the thresholds for
the alert
This function can be deactivated
permanently by a CITROËN dealer
or
  a   qualified   workshop.
In the Driving menu, select the " Settings" tab,
then " Driving aid " and select the symbol for
the " Collision risk alert "
  function:
F
 
m
odify   the   alert   threshold   using   the   arrows  
o

r   the   cursor.
Driving

179
C4-Picasso-II_en_Chap04_conduite_ed01-2016
However, with the "Blind spot monitoring system"   activated,   if   the   driver   starts   changing  
l

ane and another vehicle is detected in the
vehicle's
  blind   spot,   the   system   will   correct  
t

he   trajectory   of   the   vehicle   even   though   the  
d

irection   indicators   are   on.
For more information on the Blind spot
monitoring system ,
  refer   to   the   corresponding  
s

ection. If the system detects that the driver is
not
  holding   the   wheel   firmly   enough  
d

uring   an   automatic   correction   of  
t

rajectory,   it   interrupts   the   correction.  
A

n   alert   is   triggered   to   encourage  
t

he   driver   to   take   back   control   of   the  
v

ehicle.
Activation / Deactivation
Activation / deactivation of the system is done i
n the Driving  menu   of   the   touch   screen   tablet.
Select the " Driving assistance " tab then
" Help staying in lane ".
The state of the system stays in memory when
the
  ignition   is   switched   off.
While the direction indicators are on and for
a
 
few
 
seconds
 
after
 
switching
 
them
 
off,
 
the
 
s

ystem
 
considers
 
that
 
any
 
change
 
of
 
trajectory
 
i

s
 
voluntary
 
and
 
no
 
correction
 
is
 
triggered
 
d

uring
 
this
 
period.
4
Driving

185
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Fatigue detection system
It is recommended that you take a break as soon as you feel tired or at least every two hours.
D epending   on   version,   the   vehicle   either   has   the   "Driving   time   warning   system"   only,   or   this   combined   with   the   "Fatigue   detection   system".
Driving time warning
The system t riggers  a n  a lert  o nce  i t  d etects  t hat  t
he   driver   has   not   taken   a   break   after   two   hours  
o

f   driving   at   a   speed   above   40   mph   (65   km/h).
This
  alert   takes   the   form   of   the   display   of   a  
m

essage   encouraging   you   to   take   a   break,  
a

ccompanied   by   an   audible   signal.
If the driver does not follow this advice, the
alert is repeated hourly until the vehicle is
stopped.
The system cannot in any
circumstances replace the need for
vigilance
 
on
 
the
 
part
 
of
 
the
 
driver.
Do
 
not
 
take
 
the
 
wheel
 
if
 
you
 
are
 
tired. As soon as the speed of the vehicle
drops
  below   40   mph   (65   km/h),   the  
s

ystem   goes   into   standby.
The
  driving   time   is   counted   again   once  
t

he   speed   is   above   40   mph   (65   km/h).
The
  system   resets   itself   if   one   of   the   following  c
onditions   is   met:
-
 
e
ngine   running,   the   vehicle   has   been  
s

tationary for more than 15 minutes,
-
 
t
he   ignition   has   been   switched   off   for   a   few  
m

inutes,
-
 
t
he   driver's   seat   belt   is   unfastened   and  
t

heir   door   is   open.
The system is activated or deactivated in the
touch
 
screen
 
tablet.
Activation / Deactivation
In the Driving menu, select the " Settings" tab,
then " Driving aids " and "Fatigue Detection
System ".
4
Driving

188
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Front parking sensors
The sound emitted by the speaker (front or rear) indicates whether the obstacle
is
  in   front   or   behind. The system will be deactivated
automatically
  if   a   trailer   is   being  
t

owed or a bicycle carrier is fitted on
a towbar (vehicle fitted with a towbar
installed
  in   line   with   the   manufacturer's  
r

ecommendations).In bad weather or in winter, ensure
that the sensors are not covered with
mud,
  ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain sound sources (motorcycle,
lorry,
  pneumatic   drill,   etc.)   may   trigger  
t

he   audible   signals   of   the   parking  
s

ensor   system.
As
 
an
 
addition   to   the   rear   parking   sensors,   the  
f

ront
 
parking   sensors   are   triggered   when   an  
o

bstacle is detected in front and the speed of
the
 
vehicle   remains   below   6   mph   (10   km/h).
The
 
front   parking   sensors   are   interrupted   if  
t

he vehicle stops for more than three seconds
in
 
for ward   gear,   if   no   further   obstacles   are  
d

etected or when the speed of the vehicle
exceeds   6   mph   (10   km/h). The   parking   sensors   can   be   deactivated   in   the  
t

ouch   screen   tablet.
F
I
n the Driving
menu, select the " Driving
assistance " tab, then "Parking sensors ".
Operating fault
In the event of a malfunction of
the
  system,   when   reverse   gear   is  
e

ngaged,   this   warning   lamp   flashes  
f

or a few moments then stays on
continuously.
This indicator comes on in the
instrument pan el.
A
  new   selection   reactivates   the   function.
High pressure jet wash
When  washing   your   vehicle,   do   not  
d

irect   the   lance   within   30   cm   of   the  
sen

sors.
The
 
parking
 
sensors
 
are
 
deactivated
 
w

hile
 
the
 
Park
 
Assist
 
system
 
is
 
m

easuring
 
a
 
space.
For more information on Park Assist ,
refer
 
to
 
the
 
corresponding
 
section.
Deactivation / Activation of
the front and rear parking
sensors
A message appears, accompanied by an a
udible s ignal.
Contact a CITROËN dealer or a qualified
workshop.
Driving