2016 Citroen C4 Audio and telematics

340
C4-2_en_Chap10b_SMEGplus_ed02-2015
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require
  prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth menu of your device, select the s
ystem   name   in   the   list   of   devices   detected.
Enter
  a   code   of   at   least   4   figures   in   the   device  
a

nd   confirm. Enter
  this   same   code   in   the   system,  
s

elect "OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth function and   ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration). Press on Telephone to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth connection ".
Select Search .
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
Select the name of the desired   peripheral   from   the  
l

ist and " Confirm ".
Enter
 
a
 
code   of   at   least   4   figures   for  
t

he connection then " Confirm".
Enter
 
this
 
same
 
code   in   the   telephone   then  
a

ccept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying
 
of
 
audio
  files   from   the   telephone),
-

i

n " Internet "
 
(internet   browsing,   only   if   your  
t

elephone
 
is
 
compatible   with   the   "DUN"  
D

ial-Up
 
Networking   Bluetooth   standard).
Select
 
one
 
or
 
more
 
profiles   and   confirm.
Audio and Telematics

341
C4-2_en_Chap10b_SMEGplus_ed02-2015
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
.
Audio and Telematics

342
C4-2_en_Chap10b_SMEGplus_ed02-2015
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well  as   the   deletion   of   a   pairing. Using
  the   telephone   is   not  r
ecommended   while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
Or "Connect / Disconnect " to start or
end the Bluetooth connection with
the
  selected   device.
Or "Delete "
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted   TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on
  the   steering   mounted   TEL button
to
  reject   the   call.
Or Select "End call".
Making a call
Calling a new number
Press on Telephone to display the
primary pag e.
Enter
  the   phone   number   using   the  
d

igital
 k
eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to display the
primary pag e.
Or
  make   a   long   press
on
  the   steering   mounted   TEL
 
button.
Audio and Telematics

343
C4-2_en_Chap10b_SMEGplus_ed02-2015
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone to display the
primary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts /
entries
Press on Telephone to display the
primary pag e.
Select " Contacts ".
Select " View".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
Or "Modify "
  to   edit   the   selected   contact.
Or "Delete " to delete the selected
contact.
Or "Delete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "
By name" to view the list of
contacts.
.
Audio and Telematics

344
C4-2_en_Chap10b_SMEGplus_ed02-2015
The following table groups together the answers to the most frequently asked questions concerning your audio system.
Frequently asked questions
Navigation
QUESTIONANSWER SOLUTION
The route calculation is
not
 
successful. The
  route   settings   may   conflict   with   the   current   location   (exclusion  
o

f   toll   roads   on   a   toll   motor way). Check
  the   route   settings   in   the   "Navigation"  
m

enu.
The
 
POIs   do   not   appear. The   POIs   have   not   been   selected.Select
  the   POIs   in   the   list   of   POIs.
The Hazard zone audible
warning
  does   not   work. The
  audible   warning   is   not   active.Activate
  audible   warnings   in   the   "Navigation"  
m

enu.
The
 
system   does   not  
s

uggest   a   detour   around  
a

n
 
incident   on   the   route.The
  guidance   criteria   do   not   take   account   of   TMC   messages.Select the "Traffic info" function in the list of route
settings.
I receive an Accident-
prone area alert which is
not
 
on
 
my   route. Other
  than   guidance,   the   system   announces   all   Hazard   zones  
p

ositioned   in   a   cone   located   in   front   of   the   vehicle.   It   may   provide  
a

n   alert   for   a   Hazard   zone   located   on   nearby   or   parallel   roads.
Zoom in on the map to view the exact position of the Accident-prone   area.   Select   "On   the   route"   to   no l

onger   receive   alerts   other   than   navigation   instructions
 o

r   to   reduce   the   time   for   the   announcement.
Audio and Telematics

345
C4-2_en_Chap10b_SMEGplus_ed02-2015
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to  
r

eceive   the   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   "Geographic   filter"   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   started   up   completely  
s

o   that   there   is   GPS   coverage   by   at   least  
4

 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s   dependent   on   the   GPS   signal   reception  
c

onditions.
.
Audio and Telematics

346
C4-2_en_Chap10b_SMEGplus_ed02-2015
Radio
QUESTIONANSWER SOLUTION
The
 
quality   of   reception   of  
t

he radio station listened
to
 
gradually   deteriorates  
o

r the stored stations do
not
 
function   (no   sound,  
87

.5 Mhz   is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.Press
  and   hold   the   "List"   button   at   the   steering  
m

ounted   controls   to   update   the   list   of   stations  
r

eceived   or   press   on   the   system   update   function:  
"

Update   list".
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.
Audio and Telematics

347
C4-2_en_Chap10b_SMEGplus_ed02-2015
Media
QUESTIONANSWER SOLUTION
Playback   of   my   USB  
m

emory   stick   starts   only  
a

fter
 
a
 
very   long   wait  
(

around   2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd   limit   the   number   of   sub-folders   in   the   file  
s

tructure   on   the   memory   stick.
When
 
I

 
c
onnect  
m
y  
i
Phone  
a

s a telephone and to
the
 
USB   port   at   the   same  
t

ime,
 
I
 
am   unable   to   play  
t

he
 
music   files. When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces  
t

he   streaming   function.   The   streaming   function   takes   the   place  
o

f   the   USB   function   which   is   then   not   useable,   there   is   a   period  
w

ithout   sound   of   the   track   being   played   with   Apple
® players.D isconnect   and   reconnect   to   the   USB   port   (the  
U

SB   function   takes   priority   over   streaming).
The
 
CD
 
is
 
ejected
 
a

utomatically
 
or
 
is
 
not
 
p

layed
 
by
 
the
 
player. The CD is inserted upside down, is unplayable, does not contain any
audio
 
data
 
or
 
contains
 
an
 
audio
 
format
 
which
 
the
 
player   cannot   play.-
 
C
heck   that   the   CD   is   inserted   in   the   player  
t

he   right   way   up.
-
 
C
heck   the   condition   of   the   CD:   the   CD  
c

annot   be   played   if   it   is   too   damaged.
-
 C

heck   the   content   in   the   case   of   a   recorded
 C

D:   refer   to   the   advice   in   the   "AUDIO"   section.
-
 
T
he   audio   system's   CD   player   does   not   play  
DV

Ds.
-
 
S
ome   recorded   CDs   will   not   be   played   by  
t

he   audio   system   because   they   are   not   of   the  
c

orrect
 q
uality.
The CD has been recorded in a format that is not compatible with the player (udf, ...).
The CD is protected by an anti-pirating protection system which is not   recognised   by   the   audio   system.
There
 
is
 
a
 
long
 
waiting
 p

eriod
 f

ollowing
 t

he
 i

nsertion
 o

f a CD or connection of a
USB
 
memory
 
stick. When
  a   new   medium   is   inserted,   the   system   reads   a   certain  
a

mount   of   data   (directory,   title,   artist,   etc.).   This   may   take   from   a   few  
s

econds   to   a   few   minutes. This
  phenomenon   is   normal.
.
Audio and Telematics