2016 Citroen C4 service

24
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Warning/indicator lampis on Cause Action/Observations
+
+ SCR emissions
control system

(BlueHDi Diesel) fixed,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust   emissions  
r

eturn   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage   indicating   the  
r

emaining
 d
riving
 r
ange.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   without delay, to avoid a breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call on a
CITROËN
  dealer   or   a   qualified   workshop.
Instruments

30
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service indicator
System that informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vice
 s
chedule.
The point at which the service is due
is
  calculated   from   the   last   service  
i

ndicator zero reset,   according   to   the   distance  
c

overed   and   the   time   elapsed   since   the   last  
ser

vice.
For BlueHDi Diesel versions, the level of
deterioration
  of   the   engine   oil   may   also   be  
t

aken   into   account,   depending   on   the   country  
o

f   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service information appears   in   the   instrument   panel   central   screen.
Between 600 miles (1 000 km)
and 1800 miles (3 000 km) remain
before the next service is due
For a few seconds after the ignition is switched on,   the   spanner   symbolising   the   service o

perations   comes   on.   The   distance   recorder
 d

isplay   line   or   a   specific   message   in   the
 i

nstrument   panel   central   screen   indicates   the
 d

istance
 r
emaining
 b
efore
 t
he
 n
ext
 ser
vice
 i
s
 d
ue.
For example:
 

1   700   miles   (2   800   km)   remain
 b

efore   the   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched
 o

n,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched  
o

n,   the   screen   indicates:
A
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 
t

he spanner goes off ;
 
the
 
distance
 
recorder
 
r

esumes
 
its
 
normal
 
operation.
 
The
 
screen
 
then
 
i

ndicates
 
the
 
total
 
and
 
trip
 
distances. A
  few   seconds   after   the   ignition   is   switched  
o

n,   the   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
Instruments

31
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service overdue
For a few seconds after the ignition is switched on, the spanner flashes to indicate that the service
must
  be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles
 
(

300   km).
For
  a   few   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
A
  few   seconds   after   the   ignition   is   switched  
o

n,   the   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on .
For BlueHDi Diesel versions, this alert is also
accompanied
  by   the   fixed   illumination   of   the  
S

ervice   warning   lamp   when   the   ignition   is  
s

witched   on. The
  spanner   comes   on   if   you   have  
e

xceeded   the   specified   time   interval  
s

ince the last service, as indicated in
the
 ma

nufacturer's
 ser
vice
 s
chedule.
For BlueHDi Diesel versions, the
spanner
  may   also   come   on   before   the  
n

ormal   service   point,   according   to   the  
l

evel   of   deterioration   of   the   engine   oil,  
w

hich
 d
epends
 o
n
 t
he
 d
riving
 c
onditions
 i

n   which   the   vehicle   is   used.
1
Instruments

32
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If you have carried out the service on your
vehicle
 y

ourself:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the ".../000" trip distance
recorder zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the screen indicates "=/0" and the
spanner
  disappears,   release   the   button.Following
  this   operation,   if   you   wish   to  d
isconnect   the   battery,   lock   the   vehicle  a
nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   registered.
Instruments

34
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE w
arning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
0 k

m   or   miles   -   ("NO   START   IN   0   miles"   means  
"

Starting
 p
revented").
The AdBlue
® tank  is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before   engine  
s

tarting   is   prevented   -   (For   example   "NO  
S

TART   IN   180   miles"   means   "Starting   will   be  
p

revented   in   180   miles).
When
  driving,   this   display   appears   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Other wise you will not be able to restart your
engine.
For
 
more
 
information
 
on
 
topping-up   the  
Ad

Blue
® additive, refer to the corresponding s
ection. To
  be   able   to   start   the   engine,  
w

e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou carry out the top-up yourself, it is
essential   to   add   at   least   3.8   litres   of  
Ad

Blue
® to the additive tank.
F
or
 
more   information   on   topping-up  
t

he AdBlue
® additive, refer to the
corresponding s ection.
Instruments

35
C4-2_en_Chap01_instruments-de-bord_ed02-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The  UREA,   SERVICE   and   diagnostic   warning  
l

amps   comes   on,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message  
"

Emissions
 f
ault".
The
  alert   is   triggered   when   driving,   when  
t

he   fault   is   detected   for   the   first   time,   then  
w

hen   switching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists. During an authorised driving phase

(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed (after 3
0   miles   (50   km)   covered   with   the   permanent d

isplay   of   the   message   signalling   a   fault),   the
 S

ERVICE   and   engine   diagnostic   warning   lamps
 c

ome   on   and   the   UREA   warning   lamp   flashes,
 a

ccompanied   by   an   audible   signal   and   the
 t

emporary   display   in   the   instrument   panel   of
 "

NO   START   IN"   and   a   distance,   indicating   the
 r

emaining   range   express   in   miles   or   kilometres
 b

efore   engine   starting   is   prevented   -   (e.g.:   "NO
 S

TART   IN   350   miles"   means   "Starting   will   be
 p

revented   in   350   miles").
A
 
system
 
that
 
prevents
 
engine
 
starting
 
is
 
activated   automatically   from   650   miles   (1   100   km)   after   confirmation   of   a   fault   with   the   SCR   emissions  
c

ontrol
 
system.
 
Have
 
the
 
system
 
checked
 
by
 
a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
If
 
it
 
is
 
a
 
temporary
 
fault,
 
the
 
alert
 
d

isappears
 
during
 
the
 
next
 
journey,
 
a

fter
 
a
 
self
 
diagnosis
 
test
 
of
 
the
 
SCR
 
e

missions
 
control
 
system. While
  driving,   this   display   appears   every  3
0 seconds   while   the   fault   with   the   SCR   system  
p

ersists.
The
  alert   is   repeated   when   switching   on   the  
ig

nition.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
Other wise, you will not be able to restart your
engine.
1
Instruments

47
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Touch screen tablet
General operation
Principles
Press the virtual buttons in the touch screen
tablet.
Each  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
As a safety measure, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some
 
functions
 
are
 
not
 
accessible
 
w

hen
 d

riving.
This
 
system
 
gives
 
access
 
to:
-
 
m

enus
 
for
 
adjusting
 
settings
 
for
 
vehicle
 f
unctions
 
and
 
systems,
-
 a
udio
 
and
 
display
 
settings
 
menus,
-
 
a

udio
 
system
 
and
 
telephone
 
controls
 
and
 
t

he
 
display
 
of
 
associated
 
information.
-
 
t

he
 
display
 
of
 
alert
 
messages,
-
 t

he
 
display
 
of
 
the
 
ambient
 
temperature
 
(a
 
blue
 s

nowflake
 
appears
 
if
 
there
 
is
 
a
 
risk
 
of
 
ice),
-
 
t

he
 
display
 
of
 
the
 
trip
 
computer.
And,
 
depending
 
on
 
equipment,
 
it
 
also
 
allows:
-
 
t

he
 
display
 
of
 
visual
 
parking
 
sensors
 
i

nformation,
-
 
a

ccess
 
to
 
the
 
controls
 
for
 
the
 
navigation
 
s

ystem
 
and
 
Internet
 
services,
 
and
 
the
 
d

isplay
 
of
 
associated
 
information.
Recommendations
It is necessary to press firmly, particularly for " flick"   gestures   (scrolling   through   lists,   moving  
t

he   map...).   A   light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do not touch the touch screen tablet with wet
hands.
Uses
  a   soft   clean   cloth   to   clean   the   touch  
s

creen
 t
ablet. Use
  this   button   to   go   to   the  
s

econdary
 pag
e.
After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
Use
  this   button   to   return   to   the  
p

rimary
 pag
e.
Use
  this   button   for   access   to  
a

dditional   information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use
  this   button   to   quit.
1
Instruments

48
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Menus
Press one of the buttons on the control panel
for  direct   access   to   a   particular   menu.
Driving .
Gives
  access   to   the   trip   computer   and,
 d

epending   on   version,   allows   settings
 t

o   be   adjusted   for   certain   functions.
Refer
  to   the   corresponding   section.
Navigation .
Depending
  on   trim   level   or   country   of  
s

ale,   navigation   can   be   not   available,  
a

n   option   or   standard   equipment.
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Radio Media .
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Telephone .
Refer
  to   the   "Audio   and   telematics"  
s

ection. Connected services
.
The connected services are accessible
using
  the   Bluetooth
®, Wi-Fi, CarPlay®
or
 
MirrorLinkTM connections.
Refer
 
to
 
the
 
"Audio   and   telematics"  
s

ection.
Settings .
Allows
 
configuration   of   the   display  
a

nd
 
the
 
system. 1.
 V

olume   /   mute.
 R

efer   to   the   "Audio   and   telematics"   section.
Instruments