248
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
F Place the foot of the jack 2 on the ground a
nd ensure that it is directly below the
front
A or rear B jacking point provided on
t
he underbody, whichever is closest to the
wheel
to be changed.
Ensure
that the jack is stable. If the ground is slippery or loose, the jack may slip or drop -
R
isk of injury!
Take
care to position the jack only at one of the jacking points A or B under the vehicle,
ensuring
that the head of the jack is centred under the contact area of the vehicle.
O
ther wise, there is a risk of damage to the vehicle and/or the jack dropping - Risk of injury!F
R emove the bolts and store them in a clean p
lace.
F
R
emove the wheel.
F
E xtend the jack 2 until its head comes into c
ontact with the jacking point A or B used;
t
he contact area A or B on the vehicle must
b
e engaged with the central part of the
h
ead of the jack.
F
Ra
ise the vehicle until there is sufficient
space
between the wheel and the ground
t
o admit the spare (not punctured) wheel
e
asily.
In the event of a breakdown
